iConnect Active+ M08Y
USER GUIDE …..……..……..……..……..…….. 1
02092_INS22
08Y095000 5.11.22
Register your product at https://www.timex.com/product-registration.html
Register your product at https://www.timex.ca/product-registration.html
iConnect Active+
M08Y
User manual
Please read the manual before use.
The information in this document won't be modified or extended in accordance with any notice.
1. Product Overview
Physical button operation:
Single press
- To return.
- To wake up the screen when it is off.
Press and hold
- To turn on the watch when the watch is off.
2. Charging the watch
Connect the
USB connector end of the charging cable to a DC 5V power source.
Connect the other end of the charging cable to the magnetic charging contact of the watch.
Charge the watch for at least 3 hours to ensure fully charged before use.
Note: Remove the charging cable from any power source when the watch is not charging. Only the bundled
charging cable should be used for charging the watch.
3. Turning on the watch
- Press and hold the physical button to turn on the watch
- The watch will automatically turn on once the watch is being charged.
4. Turning off the watch
Go to Settings -> Shutdown -> Press the tick icon.
5. App download and pairing
1) Download and install the iConnect Next by Timex App from Google Play Store, Apple Store.
2) Register a user account by using a valid email address. Verification by entering a code sent to the email
address is required.
3) After registration, it is required to enter some personal information, such as gender, date of birth, etc.
4) Ensure the watch is fully charged and turned on before pairing with the App.
5) Follow the steps shown in the App to search the watch.
A static connection icon on
the status bar of the watch
represents the watch is
being connected.
6. Basic operations
In TOD screen:
Swipe up – Display activity data, such as step count, HR, etc., and sport mode.
Swipe down – List out the message notifications.
Swipe right – Show up the status bar and feature shortcuts.
Swipe left – Enter the feature menu of the watch.
Press the physical button – Toggle the screen on and off.
7. Feature list
7.1. Workout
Various sport modes can be chosen for different sports training:
Outdoor Run, Indoor Run, Outdoor Walk, Indoor Walk, Hiking, Outdoor Cycle, Indoor Cycle, Cricket,
Yoga, Rower, Elliptical, Other.
Set the goal of calories, time or distance (for some modes only) for the respective mode if required.
Press the triangle icon at the bottom right corner on the related setting screen, or simply press “START
NOW” to start sport mode.
After starting any of the sport modes, press the button to toggle pausing and resuming the training or
press and hold the button to quit the current training.
Note: iConnect Active+ is not recommended for any indoor or outdoor water sport.
7.2. Heart rate
After entering the heart rate measurement page, the watch will start the heart rate measurement
immediately.
Note: Please wear the watch properly to ensure accurate heart rate measurement.
7.3. Blood oxygen
After entering the SPO2 measurement page, the watch will start the blood oxygen measurement
immediately.
Note: The max. and min. reading will not be refreshed immediately during blood oxygen measurement.
The max. and min. value can be refreshed by switching to menu and back to blood oxygen page.
7.4. Stress
After entering the Stress measurement page, the watch will start the stress measurement immediately.
7.5. Relax
This mode regulates user’s breathing frequency to help user relaxing. After entering the Relax page,
choose the breath guiding duration, 1 min or 2 mins, and then press the triangle icon to start.
7.6. Alarm
Add alarm by using the iConnect Next by Timex App. After the alarm is set by the App, the alarm will be
shown on the Alarm page of the watch. The alarm can be disabled or activated by tapping the related
alarm in the page. Grayed icon represents the respective alarm is disabled.
7.7. Music control
Music control has to be activated in the App before being able to control playing the music in the
connected phone by the watch. Under this feature, the watch can play and pause the currently played
music as well as choose the next or previous music.
7.8. Timer
The watch can act as a stopwatch or count-down timer. After choosing the desired mode, just tap on
the triangle icon at the bottom right corner of the screen to start counting. During counting, the timer
can be paused tapping the pause icon at the bottom right corner. User can resume counting by tapping
the triangle icon at the bottom right corner or stop and reset counting by tapping the square icon at
the bottom left corner.
For timer function, maximum countdown time is 120min 59sec. After starting the countdown, the
down-counting time is displayed as format HH:MM:SS.
7.9. Setting
There are four subpages inside Setting: Watchfaces, Brightness, About and Shutdown.
7.9.1. Watchfaces
Drag the screen up and down in this page to choose desired dial face in TOD screen. There are three
build-in dial face on the watch. One optional dial face is available for downloading from the App to the
watch.
7.9.2. Brightness
Tapping the word “Brightness” in Setting page to adjust the brightness of the screen. There are three
brightness level can be set.
7.9.3. About
Tap on the word “About” to show the firmware version and BT address of the watch.
7.9.4. Shutdown
Tap on the word “Shutdown” and then tap on the tick icon to power off the watch.
7.10. Workout Record
List down the records of workout mode training.
7.11. Find Phone
Find Phone feature can be enabled and disabled through the iConnect Next by Timex App. Enable such
feature before attempt finding the paired phone.
After connecting the watch to the App, swipe the screen to right in TOD to enter the shortcut page.
Tap on the phone icon on the right bottom to trigger finding the connected mobile phone. The phone
icon turns green and the phone should vibrate with media sound accordingly. Tap on the phone icon
again to make it gray and the phone should stop vibrating and playing sound.
7.12. Do Not Disturb (DND) mode
After connecting the watch to the App, swipe the screen to right in TOD to enter the shortcut page.
Tap on the moon icon on the left bottom to make it blue and enable the DND mode. The DND mode
can be disabled by tapping on the moon icon again and turning it gray. Please ensure the time period is
set for the DND mode in the App before enabling it.
8. iConnect Next by Timex App operations
8.1. Home
8.1.1. Fitness
Tap on the activity data area in Home page to enter Fitness page and display the summary of activity
including the calories burned, the total workout time and total walking time. Tap on the horizontal bar
of those three types of data to display respective detailed statistics.
8.1.2. Step
Tap on the step counting area in Home page to display the step count details and records.
8.1.3. Distance
Tap on the distance area in Home page to display the distance details and records.
8.1.4. Training record
Tap on the Training record widget to check the training records obtained through the App and the
training record synchronized with the watch.
8.1.5. Sleep
Tap on the Sleep widget to check the details of sleep monitoring records.
8.1.6. HR
Tap on the HR widget to check the heart rate measurement records and details.
8.1.7. Stress
Tap on the Stress widget to check the stress measurement records and details.
8.1.8. SPO2
Tap on the SPO2 widget to check the blood oxygen concentration measurement records and details.
8.1.9. Weight
Tap on the Weight widget to input the weight of current date and check the recorded weight data.
8.2. Workouts
The Workout mode of the app allows the user to record a workout from the phone, where for outdoor
workouts the phone’s GPS will be used to record the course. For all App-based workouts, if the watch is
connected to the app the app will record heart rate data from the watch for the workout.
8.2.1. Add Device
User can add the watch by tapping “Add Device” and going through the steps in Section 5 if the watch
is not connected.
8.2.2. Edit Sports
User can add or remove the training modes shown in the Training page. There are six modes, Outdoor
Running, Outdoor Walking, Outdoor Biking, Hiking, Indoor running and Indoor walking, can be chosen.
Those training modes are independent to the training/sport modes on the watch.
8.2.3. Training Setup
User can enter the training setup page by tapping the gear icon.
The Training Objective is to set the specific goal of training, such as distance, calories, steps, time
duration.
The Sound alerts defines the sound reminder frequency in training mode.
The HR zone displays the HR zone definition.
8.2.4. Training mode
After completing the training setup, choose the training mode and tap on the “Start” to start the
training. After the training is started, tap on the pause icon to pause the training and then tap on the
triangle icon to resume or tap on the square icon to stop the training. The recorded training can be
checked in the “Training Record” in section 8.1.6.
8.3. Device
The Device section of the app allows the user to pair a watch or to change settings for the watch.
8.3.1. Add Device
Add the watch by going through the steps mentioned in Section 5.
8.3.2. Device Information
Once the watch is connected with the App successfully, the icon and BT name of the watch will be
displayed. The approximated battery level percentage, connecting status and the firmware version of
the watch will also be shown under the BT name. Tap on the watch icon to enter the detailed
information page.
8.3.2.1. Watch face Market
Apart from the three build-in watch face, iConnect Active+ also supports watch face pushed
from the App. There are a number of predefined watch face from the App. Users can also
create their own watch face by using favorite picture located in the phone as the watch face
wallpaper.
8.3.2.1.1. Downloadable watch face
Tap on the “More” next to the “New arrivals” to check all downloadable watch faces
predefined in the App. Tap on the desired watch face and tap on the “Add and
install” button to download and install the watch face to the watch. The watch face
will be set as the current watch face once downloaded and installed on the watch
successfully.
8.3.2.1.2. Wallpaper watch face
To create and install self-defined wallpaper watch face, tap on the “More” next to
the “Photo” and choose “Album” or “Camera” to import the favorite picture from
the phone. Then tap on “Add and install” to button to download and install the
watch face to the watch. The watch face will be set as the current watch face once
downloaded and installed on the watch successfully.
8.3.2.2. Health Tracking
8.3.2.2.1. HR monitoring
The continuous automatic HR measurement on the watch can be enabled or
disabled by toggling the button.
8.3.2.2.2. Stress monitoring
Pressure monitoring can be disabled or disabled by toggling the button.
8.3.2.2.3. Walk-around Reminder
Sedentary reminder can be enabled or disabled by toggling the button. The starting
time, ending time, target steps per hour and repeat cycle of the sedentary reminder
can also be adjusted in this page.
8.3.2.2.4. Menstrual cycle
Menstrual cycle reminder can be activated by toggling the button. The detailed
setting of the menstrual cycle can also be adjusted in this page.
8.3.2.3. Alarm Clock
Alarm clock can be added by tapping on “+ Add Alarm” and defining the alarm details.
Ensure the set alarm is activated by toggling the button on the right side to green color.
User can set the snoozing time and frequency by tapping the gear icon at the top right
corner of the page.
8.3.2.4. Call Reminder
Call reminder can be activated by toggling the button. Please note that no call reminder will
be received if the Do Not Disturb mode is activated.
8.3.2.5. Notifications
Message notification can be enabled by toggling the button next to “Allow notification” to
green. Message notification for various App can be enabled or disabled individually in this
page.
8.3.2.6. Device Settings
8.3.2.6.1. Do Not Disturb mode
The time period of Do Not Disturb mode can be defined and enabled individually.
8.3.2.6.2. Auto exercise recognition
iConnect Active+ supports automatic identification of walking or running status even
no training mode is initiated. Such feature can be enabled in this page.
8.3.2.6.3. Find my phone
The watch can trigger vibration on the phone by tapping the “Find phone” icon on
the watch when this feature is activated.
8.3.2.6.4. Music Control
The watch can be used to control playing music on the phone when this feature is
activated.
8.3.2.6.5. Lilt wrist turn on screen
Screen on by wrist turning can be activated.
8.3.2.6.6. Auto-brightness at night
Automatic screen brightness at night time can activated in this option. The night
time period can also be defined.
8.3.2.6.7. Training Mode
The workout modes displayed on the watch can be chosen in this mode.
8.3.2.6.8. Device language
The UI language of the watch can be chosen under this option. If “Follow system” is
chosen, the UI language of the watch will follow the UI language of the phone if
available.
8.3.3. Device upgrade
OTA firmware upgrade is supported. User can upgrade the firmware of the watch if a newer
version is available.
8.3.4. About
Display the details of the watch, such as firmware version and BT address, etc.
8.3.5. Restart the watch
The watch will be restarted when confirmed in this option.
8.3.6. Reset the watch to factory default
The watch will be reset to factory default when confirmed in this option. All the data
on the watch will be erased after reset.
8.3.7. Delete the watch
The watch will be unpaired and all synchronized data on the phone will be erased
once confirmed.
8.4. Me
The Me section of the app lets the user edit his/her profile, shows the user’s accomplishments, displays the
user’s weekly health report, lets the user change account related settings and lets the user choose to upload
data to Apple Health or Google Fit.
8.4.1. My profile
Under My page, tap on the region showing the nickname of user account to enter My profile page.
Profile details including picture, nickname, gender, birthday, height, weight, email address and region
can be modified.
8.4.2. My Medals
Medal will be awarded if user achieve specific activity or training target.
8.4.3. My Data
A summary of activity data and training record can be checked in this page. Those data should match
with those displayed in Home page if available.
8.4.4. Health Report
Allow access to weekly report on the tracked activity.
8.4.5. Messages
Any messages from the App to user, such as weekly activity report, is displayed in this page.
8.4.6. Setting
8.4.6.1. My Objectives
User can define the goal of step count and weight.
8.4.6.2. Data synchronization
User can manually synchronize the App with the connected watch by tapping the “Manual
Sync” button.
8.4.6.3. Time format
User can choose the time format shown in the App to be 12 hours or 24 hours.
8.4.6.4. Unit
User can choose Metric or Imperial (British system) for the unit shown in the App.
8.4.6.5. Week start time
User can define the first day of a week for the App.
8.4.6.6. Map Engine
Google Map or Amap can be chosen as the default Map Engine used by the App.
8.4.6.7. Privacy and Security
User can choose whether different information or data should be synchronized to the cloud
system of the App.
8.4.6.8. Data sharing and authorization
Data sharing to Strava and Goolge Fit can be activated in this page.
8.4.6.9. Modify email
User can change the linked email address of registered account in this page. Re-acquiring
verification code is required to complete the change process.
8.4.6.10. Change password
User can change the password of the registered account here.
8.4.6.11. Clear Cache
Manually clear the cache memory of the App.
8.4.6.12. Logout
Logout current registered account. Please note that all synchronized data will not be
available in the App once logout.
8.4.6.13. Cancel Account
Remove current registered account. Please note that all the data of the registered account
will be removed permanently.
8.4.7. Device problems and suggestions
User is welcome to report on any problem to App server through this page.
8.4.8. Check for update
Check for any update on the App
8.4.9. About
Show the App version, Privacy Policy and User Agreement.
9. Compliances
ISED Regulatory Compliance
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference.(2)This device must
accept any interference, including interference that may cause undesired operation of the device.
L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique
Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1)L’appareil ne doit pas
produire de brouillage; (2)L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
RF Exposure Compliance
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cet émetteur
ne doit pas être situé ou fonctionner conjointement avec une autre antenne ou un autre émetteur.
CAN ICES-3 (B)/NMB-3(B)
Environmentally friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of
separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances
is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal
effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.
CAUTION
– Risk of explosion if the battery is replaced by an incorrect type
– disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an
explosion ;
– leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or
the leakage of flammable liquid or gas ;
– a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable
liquid or gas.
10. Disclaimer
Salt water, chlorinated water, and sunlight exposure and some other certain conditions may effect the color of the
strap and case over time.
IP68 Water Resistance
The watch is rated IP68 for dust and water resistance. The watch is resistant to submersion in fresh water up to a
maximum depth of 1.5 meters for up to 30 minutes. Care should be taken to avoid over exposure to moisture and
excessive submersion in water.
Other Safety and Precaution Notices
Bluetooth® Wireless Technology
Bluetooth devices communicate without wires, using built-in radio transceivers that operate on a globally available
radio frequency to ensure worldwide compatibility. The device can communicate with other Bluetooth devices
(e.g. BT headsets) within a range of approximately 10 meters (33 feet).
Recycle
Always return your used electronic products, batteries, and packaging materials to dedicated collection points.
Battery and Charger Info
Your device has an internal, non-removable, rechargeable battery. Do not attempt to open the back cover or remove
the battery, as you may damage the device. To replace the battery, take the device to the nearest authorized service
facility.
Aircraft, Hospitals
CAUTION: The device’s Bluetooth radio must be switched to OFF in airplanes, hospitals or other public locations
where handheld wireless and other electronic devices are prohibited.
Driving Precautions
Responsible, safe driving is your responsibility when operating a vehicle. Using a mobile device or accessory for
messaging while driving may cause distraction and could result in death or injury to you or others. Using a mobile
device or accessory may be prohibited or restricted in certain areas; always obey the laws and regulations on the use
of these products.
While driving, NEVER:
• Read messages
• Review on-screen data
• Perform any other functions that divert your attention from driving
Medical Devices
Operation of radio transmitting equipment, including wireless phones, may interfere with the function of
inadequately shielded medical devices. Consult a physician or the medical device's manufacturer to determine if it is
adequately shielded from external radio energy.
To avoid potential interference, manufacturers of implanted medical devices recommend a minimum separation of 6
inches (15.3 centimeters) between a wireless device and the medical device. Persons who have such devices should:
• Always keep the wireless device more than 6 inches (15.3 centimeters) from the medical device.
• Not carry the wireless device in a breast pocket.
• Turn the wireless device off if there is any reason to suspect that interference is taking place.
• Follow the manufacturer directions for the implanted medical device.
If you have any questions about using your wireless device with an implanted medical device, consult your health
care provider.
Timex International Warranty
www.timex.com/Warranty or www.timex.ca/Warranty
FCC Notice (U.S.)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not
cause harmful interference; and (2) this device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio TV technician for help.
FCC Notice (Canada)
Avertissement de la FCC (États-Unis) / Avertissement d’IC (Canada) Cet appareil est conforme à l’Article 15 de la
Réglementation de la FCC. L’utilisation est soumise aux deux conditions suivantes : (1) cet appareil ne peut pas
causer d’interférence nuisible ; et (2) cet appareil doit accepter toute interférence reçue, y compris toute
interférence qui peut entraîner l’utilisation indésirable. Avertissement : Les modifications de cet appareil qui n’ont
pas été expressément approuvées par la partie responsable de la conformité pourrait annuler l’autorité d’utiliser
l’équipement. Remarque : Cet équipement a été testé et déclaré conforme aux limites pour appareils numériques de
classe B, selon l’Article 15 de la Réglementation de la FCC. Ces limites visent à fournir une protection raisonnable
contre les interférences dans une installation résidentielle. Cet équipement produit, utilise et peut émettre de
l’énergie radio électrique et, s’il n’est pas installé et utilisé conformément aux présentes instructions, peut causer
des interférences nuisibles aux communications radio. Cependant, il se peut que des interférences se produisent
dans une installation particulière. Si cet appareil cause des interférences nuisibles à la réception des signaux de radio
ou de télévision, ce qui peut être déterminé en allumant et éteignant l’appareil, on encourage l’utilisateur d’essayer
de corriger ces interférences par l’un des moyens suivants : — Réorienter ou repositionner l’antenne de réception.
— Augmenter la distance entre l’équipement et le récepteur. — Brancher l’équipement sur un circuit différent de
celui du récepteur. — Contacter votre revendeur ou un technicien radio/TV qualifié pour obtenir de l’aide. Cet
appareil numérique de classe B est conforme à l’ICES-003 (Canada). Cet appareil est conforme aux norme(s) RSS
d’Industrie Canada pour les appareils exempts de licence. L’utilisation est soumise aux deux conditions suivantes : (1)
cet appareil ne peut pas causer d’interférence nuisible, et (2) cet appareil doit accepter toute interférence reçue, y
compris toute interférence qui peut entraîner l’utilisation indésirable. 30 Déclaration de conformité Nom du
fabricant : Timex Group USA, Inc. Adresse du fabricant : 555 Christian Road Middlebury, CT 06762 États-Unis
d’Amérique déclare que le produit suivant : Nom du produit : iConnect Active par Timex® Numéros de modèle :
M08Y est conforme aux législations harmonisées pertinentes de l’Union européenne. La présente déclarati
DECLARATION OF CONFORMITY
Manufacturers Name: Timex Group USA, Inc.
Manufacturers Address: 555 Christian Road
Middlebury, CT 06762
United States of America
declares that the product:
Product Name: TIMEX® iConnect Active+®
Model Numbers: M08Y
is in conformity with the relevant EU harmonized legislations. This declaration is issued under the sole
responsibility of the manufacturer and conforms to the following:
EU RED Directive 2014/53/EU
Standards:
EN 300 328
EN 301 489-1
EN 301 489-17
EN 50663
EN 62368-1
Electromagnetic Compatibility (EMC) – Radio Frequency (RF)
Standards
FCC 47 CFR Part 15, Subpart C
RSS 247
ICES 103
AS/NZS 4268
AS/NZ CISPR 32
Agent: —————————————————
Sam Everett
Manager QA & Regulatory
Date: 6-May-2022, Middlebury, Connecticut, U.S.A.
©2022 Timex Group USA, Inc. TIMEX and ICONNECT are trademarks of Timex Group in the USA.
Loading...