Timberk 09H S10LW, TAW H3 D BL User Manual
Instruction manual
Руководство по эксплуатации
Outlook of devices, aslo colour scores can be revised without any special advance
notices.
Производитель вправе менять внешний вид прибора и цветовую гамму прибора без специального уведомления.
Электрическая
мойка (очиститель)
воздуха
Модели/Models:
Цвета \ Colors *
Руководство по эксплуатации включает в себя
гарантийный талон
* - Указано в дополнительной маркировке модели \
Specified in the additional marks of modes name
* - Цвета для всего изделия и/или ряда его частей \ The
colors for the whole unit and/or its parts
Electric air
washer (purifier)
TAW H3 D (W)
TAW H3 D (VT)
TAW H3 D (BL)
(W) - белый \ white
(VT) - фиолетовый \ violet
(BL) - чёрный \ black
CONTENTS
1. Important information
2. Safety measures
3. Technical characteristics
4. Description of the unit
5. Scope of delivery
6. Filling the tank with water
7. Operation of the unit
8. Cleaning and maintenance of the unit
9. Transportation and storage
10. Troubleshooting
11. Disposal
Dear customer!
2
Thank you for your good choice and purchase of a TIMBERK
humidifier. It will serve you for a long time!
2
3
4
5
5
5
To improve product quality, its design, scope of delivery or manufacturing
process can be revised without advance notice.
5
The text and digital notations in this manual may have misprints.
6
Should you have any questions on the functioning and operation of the device,
6
please refer to the seller or a specialized service center to receive clarification.
6
There is a label on the product, indicating all necessary technical data and other
useful information regarding the device.
Use the device only for purposes, stated in this manual.
The air washer is intended to automatically maintain the preset level of relative
humidity indoors and for air purification. Comfortable conditions are achieved at
relative humidity ranging from 40 to 60%.
Insufficient air humidity results in drying of mucous membranes, which in its turn
is the reason for decrease in immunity, headache, lip cracking, «sandpaper»
in the eyes, it also enables infection spreading and respiratory tract diseases,
causes fatigue, results in increased eye fatigue and worsening of attention
focusing, it has a negative effect on the condition of pets and house plants,
causes increase of dust generation and, increase of electrostatic charge of
synthetic fabrics, as well as carpets and synthetic floor coatings, it causes
damage of wooden furniture and especially parquet floors, it negatively affects
tuning of musical instruments.
1. IMPORTANT INFORMATION
2. SAFETY MEASURES
Read all instructions carefully prior to using the device for the first time. To
avoid electric shock or injury when using this device, always observe key safety
precautions including the following ones:
• Make sure that the operating voltage, specified in the device’s passport,
2
www.timberk.com • electric air washer (purifier)
matches the voltage of your electric mains.
• Prior to using the device, read operation guidelines carefully.
• The device must be out of reach of children. Do not allow children to play with
the device. Never leave a child without supervision near the operating device.
• Do not use the device with a damaged power cord or a plug. Do not use the
device if it was damaged or fell down. Return it for inspection, adjustment or
repairs to a service center.
• The device must be installed on a hard, flat and horizontal surface.
• Install the device in such a place, where the risk of contacting or hitting it is
minimal.
• The device needs regular cleaning. See operation manual section
«Recommendations on maintenance of the device».
• Do not submerge the device in water; use only clean damp cloth to clean its
case. Do not use abrasive detergents or solvents for cleaning.
• Use the device only fully assembled.
• Always disconnect the device from the mains prior to moving it and filling
its tank, draining water, cleaning, maintenance, assembly-disassembly of
particular units or if you do not use the device for a long time.
• Do not pull the cord to disconnect the device from a socket. To disconnect
the device from the mains take its plug directly. Do not disconnect the device
from the mains with wet hands.
• Do not allow foreign objects get into the device, it may result in mechanical
damages and short circuit. Do not block air inlet/outlet holes.
• Never lay the cord under carpets, as well as do not put it on sharp or hot
things. Make sure the cord does not bend and no one walks on it.
• Electrical appliances must be repaired only by authorized servicing personnel.
Improper or incompetent repairs may lead to accidents and injuries.
• If the power cord is damaged then it must be immediately replaced by a new
one by competent personnel to avoid electric shock and fire.
• The device is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or a lack of experience and
knowledge, unless they have been given supervision or instruction concerning
the use of the device by an individual responsible for their safety.
• Do not use the device outdoors.
• Do not use the device for purposes it is not intended for.
• This device is intended only for domestic use.
• Do not use the device in a room where there are combustible gases and
evaporations.
• Do not allow rain drops contact the device, do not use it in excessively humid
rooms (bathroom, laundry room, sauna, etc.).
• The device must be in a vertical position.
• Do not sit, stand or put heavy things on the device.
• Using such additives for water as for example essential oils, aromatic fluids,
detergents, etc., damage the material of the tank and the device on the whole.
Any use of such additives relieves the manufacturer/seller from any warranty
obligations.
3. TECHNICAL CHARACTERISTICS
Table 1
Discription Unit Value
Capacity of humidity ml/h 150
Power supply V/Hz 220-240~/50
Water tank l 2,2
Rated power consumption W 15
Rated current А 0,08
Protection class - IPXO
Electrical protection class - II
Device dimensions mm 250x250x330
Net weight kg 3,5
Service area m
Air flow m
The manufacturer reserves the right to change the set-list of the device
(including liquid and powder components) for different supplies without prior
notice. The changes either in no way influence the basic technical parameters
of the device or may improve them, and also not violate the legislation or quality
standards of the countries of manufacture, transit and selling.
The changes in the set-list may result in changing of the weight and dimensions
of the device, but not more than by +\- 5-20% (depending on the product
category)
2
3
/hr 120
20
www.timberk.com • electric air washer (purifier)
3
4. DESCRIPTION OF THE UNIT
1
10
Fig. 1
1. Control panel
2. Purified air outlet
3. Device case handle
4. Device case
5. Power cord
6. Air inlet
7. Drum wheel
8. Drum discs
9. Water level mark
10. Water level trailer
11. Case trailer
12. Water tray
13. Tray handle
1
2
3
4
5
6
7
8
9
10
11
12
13
2
3
4
5
WATER
SHOTAGE
6
7
8
anion
9
high
mid
low
current
humiDity
sleep
auto
Fig. 2
1. Power indicator
2. Night mode indicator
3. Ionization indicator
4. Current humidity level indicator
5. Low water level indicator
6. Automatic mode indicator
7. Ionization activation button
8. Night mode button
timer
auto
dry
3 sec
light
speed
power
high
mid
low
timer
10. Selected operation mode
indicator
11. Button lock indicator
12. Timer indicator
13. Timer ON and setting button
14. Lighting mode activation button
15. Button lock
16. On / Off button
11
12
13
14
15
16
9. Performance mode selection
button
4
www.timberk.com • electric air washer (purifier)
Directions for use
Prior to the first use, especially if outdoor temperature is below zero, let the
device heat up at room temperature for 1 hour. It is recommended to use
the device at temperature ranging from 5°C to 40°C, and relative humidity
not more than 80%. Use only clean water with temperature not more than
30°C. Prior to a switching the device off for a long time (more than 2 days),
drain water from the tray and dry the discs block. Read instructions how
to clean the discs block and the tray in section «Recommendations on
maintenance of the device».
CONTROL OF THE DEVICE
• POWER on/off button (16).
Press the «POWER» button (16) to switch the device on. Pressing this button
again will stop the device and switch it to the standby mode.
• «SPEED» performance mode selection button (9).
Press the «SPEED» button (9) to select the performance mode. There are
three main operation modes: LOW (minimal performance), MID (average
performance) and HIGH (maximum performance), as well as the additional
automatic mode «AUTO» (6) (see page 5 for description of the mode
operation. When selecting a mode an indicator (10) will light up on the panel.
• «ANION» ionization activation button (7).
Press this button to activate the negative ion generator, the ionization
indicator (3) will light up on the control panel.
• «SLEEP» night mode button (8).
Press the «SLEEP» button (8) to switch the device to the night mode (see
page 4 for description of the mode operation).5. POWER on/off button (16).
• «TIMER» button (13).
By pressing the «TIMER» button (13) you can set a time interval to switch
the device off ranging from 1 to 8 hours with a 1-hour increment. At that, the
selected time (12) will be displayed on the control panel.
• «LIGHT» lighting button (14).
By pressing the «LIGHT» button (14) you can activate or deactivate the
lighting function.
Lock button to prevent accidental pressing of buttons and ensure
childproofing «TIMER» + «LIGHT» (15).
Press and simultaneously hold «TIMER» and «LIGHT» buttons (15) for about
3 seconds to lock / unlock control buttons to avoid accidental (erroneous)
pressing of buttons. When activating this function, the button lock indicator
(11) will be displayed.
• Current humidity level indicator (4).
Readings of the current humidity indicator may vary dynamically.
Approximate relation of readings: «LOW» – low humidity level, «MID» –
average, «HIGH» – high.
• Low water level indicator (5).
When water level in the tray lowers to minimum, the low water level indicator
(5) will light up. Along with that, several sound signals will be heard, notifying
of water shortage, after that the device will be switched off.
5. SCOPE OF DELIVERY
1. Air washer – 1 pc.
2. Operation manual and Guarantee card – 1 pc.
3. Packing – 1 pc.
6. FILLING OF TANK WITH WATER
To pour water into the tray, take the device case handles, remove it by lifting
upwards and move aside. Take the tray by handles with both hands (with
a drum or without it), fill in water up to the mark. To avoid accidental falling
or hitting, hold it with both hands. Move the filled tray to the supposed
location of operation. Install the device case on the tray filled in with water
so that the drum wheel coincides with the device gear.
7. OPERATION OF THE UNIT
Please note that trailers in the tray are located on the front side. Connect
the device to the electric mains, press the «POWER» button, use buttons
on the control panel to select the desired operation mode and time.
You can find accurate description of the meanings of buttons in section
«Control of the device». To switch the device off, press the «POWER»
button. Disconnect the device from the electric mains. Please note that
trailers in the tray are located on the front side.
www.timberk.com • electric air washer (purifier)
5
Connect the device to the electric mains, press the «POWER» button,
use buttons on the control panel to select the desired operation mode
and time. You can find accurate description of the meanings of buttons in
section «Control of the device».
To switch the device off, press the «POWER» button. Disconnect the device
from the electric mains. The device must be installed not less than 10 cm
from walls and heating radiators. Full access of air to the device increases
its efficiency and performance.
Do not install the device on a soft carpet or carpet flooring.
Fill the tray with cold tap water up to the water level mark.
Fill the device only with cold water (not more than 30°C). Hot water may
damage drum discs and other parts of the device. It is recommended to fill
in treated (filtered) water. In this case cleaning of drum discs and the water
tray can be carried out less frequently than using tap water.
NOTE:
In order to improve the performance of the humidifying
device, you must use warm water, but not above 30°C.
Salt deposits on the discs also helps improve the
humidifying capacity, because salt create additional
micro-structure of the disc surface, contributing to
greater wettability.
The higher the temperature of the air, the faster
humidification.
per 2 liters of water and hold it for 2-3 hours. To clean the discs block,
use a tank that will allow to fully submerge the discs block in the abovementioned citric acid solution prepared beforehand. Depending on the
density of deposits and frequency of cleaning, possibly, it will take more
time to soften the deposits.
NOTE:
All elements of the device are made of fragile material. Be
careful, try not to hit them with foreign objects and not to
drop them. Fill the water tray only with clean water without
adding any aromatic or other substances! Otherwise, it
may result in water leakage due to microcracking and
cracking on the tank, as well as loss of its properties and
damage to discs. When adding fresh water, always drain
the remaining one that was used before.
IMPORTANT!
Dampening discs are capable of absorbing water
impurities (calcium, lime, iron, etc.) during operation.
Hence, discs need to be cleaned from mineral
deposits once or twice a month, depending on water
quality. See disc cleaning instructions in section
«Recommendation on maintenance of the device».
8. CLEANING AND MAINTENANCE OF THE UNIT
Regular cleaning of the tray and discs block.
Dirt and all kinds of microorganisms accumulate in the tray during operation.
Thus, the tray as well as the discs block need to be cleaned regularly.
To clean them, use a soap solution and a soft cloth or a sponge. After
cleaning, wash the tray and discs with running water. It is recommended to
carry out such cleaning once a week.
Periodic cleaning of the tray and dampening discs.
In case of a severe contamination of the tray with lime deposits, remove
the discs block, pour it with a citric acid solution at the rate of 1 tablespoon
6
www.timberk.com • electric air washer (purifier)
9. TRANSPORTATION AND STORAGE
1. When transporting, any possible impacts and movements of the
package inside a vehicle must be avoided.
2. Handling symbols on the unit’s package must be strictly observed when
transporting and storing it.
Temperature
requirements*
Humidity
requirements*
Transportation and
storage
-30°С to +50°С
15% to 85%
condensate)
(no
We are researching new technologies and constantly improving the quality
of our products. Specifications, design and scope of delivery may be
changed without any prior notice.
* Products must be stored in dry, ventilated storages at the temperature not lower than -30°C
10. TROUBLESHOOTING
In case of emergencies resort to troubleshooting methods, given in tables.
If you are unable to solve issues by means of mentioned methods, contact
a service center.Life of the humidifier is 5 years.
Upon expiration of the humidifier it must be disposed in accordance with
regulations, rules and by means, currently in force at a disposal station. In
case of emergencies resort to troubleshooting methods, given in tables. If
you are unable to solve issues by means of mentioned methods, contact a
service center.Life of the humidifier is 5 years.
Upon expiration of the humidifier it must be disposed in accordance with
regulations, rules and by means, currently in force at a disposal station.
Problem Possible cause Remedy
No defect. If necessary to switch to
the intensive mode, press «Atomizing
frequency» button in the manual
setting mode and switch the unit to
the intensive operation mode.
Set the maximum performance.
Humidifier’s performance will be
increased in 10 minutes
Connect the plug into an outlet
carefully
Add water to the tank
Clean the air vent. Even in one room
humidity can be different depending
on the location
Install the unit in places, where it
cannot be affected by the environment
Clean the unit in accordance with the
cleaning and maintenance manual and
fill it with fresh water
Poor atomizing (insufficient
performance)
No atomizing
Difference between the level of current
humidity and readings of a humidity
recorder is too big
Steam has an
unpleasant odor
The unit is operating in a light mode
(low atomizing frequency)
Tank water temperature is too low
The plug is poorly inserted into
an outlet
Light on the water indicator has
illuminated and went out (water tank
is completely empty)
Dirt accumulation inside an air vent
The unit is operated in places, where
it is affected by the environment, for
example, by a window
Not fresh water in use
There are remains of not fresh water
or litter in the water groove
11. DISPOSAL
The humidifier’s life is 2 years. At the end of life, the humidifier must be disposed
in accordance with regulations, rules and method, effective in the disposal area.
www.timberk.com • electric air washer (purifier)
7
СОДЕРЖАНИЕ
1. Важная информация
2. Меры предосторожности
3. Технические характеристики
4. Описание прибора
5. Комплектация
6. Наполнение резервуара водой
7. Эксплуатация прибора
8. Чистка и обслуживание прибора
9. Гарантийный талон
Уважаемый покупатель!
Благодарим Вас за удачный выбор и приобретение мойки
8
9
9
10
12
12
12
14
16
воздуха TIMBERK. Она прослужит Вам долго.
Просим вас внимательно ознакомиться с данным руковод-
ством перед тем, как вы начнете эксплуатацию изделия!
1. ВАЖНАЯ ИНФОРМАЦИЯ
Производитель оставляет за собой право без предварительного уведомления покупателя вносить изменения в конструкцию, комплектацию или
технологию изготовления изделия с целью улучшения его свойств. В тексте и цифровых обозначениях данного руководства могут быть допущены опечатки. Если после прочтения руководства у Вас останутся вопросы
по работе и эксплуатации прибора, обратитесь к продавцу или в специализированный сервисный центр для получения разъяснений. На изделии
присутствует этикетка, на которой указаны все необходимые технические
данные и другая полезная информация о приборе. Используйте прибор
только по назначению, указанному в данном руководстве.
Мойка воздуха предназначена для поддержания благоприятного уровня влажности воздуха в помещении, а так же для очистки воздуха.
Комфортные условия достигаются при относительной влажности воздуха от 40 до 60%.
Недостаточная влажность воздуха приводит к высушиванию слизистых оболочек, что в свою очередь является причиной снижения
иммунитета, головной боли, растрескивания губ, жжения в глазах,
благоприятствует развитию инфекции и заболеваниям дыхательных
путей, вызывает утомление, приводит к повышенной усталости глаз и
ухудшению концентрации внимания, отрицательно влияет на состояние домашних животных и комнатных растений, приводит к усилению
пылеобразования, повышению электростатического заряда синтетических тканей, а также ковров и синтетических напольных покрытий,
приводит к повреждению мебели из древесины и особенно паркетных
полов, отрицательно влияет на настройку музыкальных инструментов.
Пожалуйста, сохраните это руководство. Внимательно прочитайте это
руководство по эксплуатации перед использованием прибора.
Этот прибор работает только от сети питания переменного тока напряжением 220-240В~/50Гц. Не подключайте этот прибор к сети питания с другим напряжением.
8
www.timberk.com • electric air washer (purifier)
Loading...