Thomson THS 222 operation manual

THS222
Digital HD Satellite Receiver
User Manual
Bedieungsanleitung
Indice
Índice
Manual do Utilizador
Uživatelská příručka
Používateľská príručka
Upute za korištenje
Felhasználói kézikönyv
Kullanıcı Kılavuzu
Руководство пользователя
Посібник користувача
www.thomsonstb.net
P+P–
MODEL DIGITAL SATELLITE HD RECEIVER THS222
13/18 V 500 mA max.
ETHERNET USB
SAT IN
1
3
4 5
7
8 9
11
14
16
18
19
22
24 27
25
28
29
32
33
26
30 34
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
USB: 5 V 800 mA max.
TV SCART
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AUDIO
AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES
RISQUE DE CHOC ELECTRIQUE
OR ITS AFFILIATES USED UNDER LICENSE BY STRONG GROUP.
NE PAS OUVRIR
AUDIO
COAXIAL
L/R
S/PDIF
THOMSON IS A TRADEMARK OF TECHNICOLOR (S.A.)
12 V , 1.5 A
MAX. 18 W
2
6
10
12 13
15 14
13 17
19
20
P+P–
21
23
31
35
MODEL DIGITAL SATELLITE HD RECEIVER THS222
MODEL DIGITAL SATELLITE HD RECEIVER THS222
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
THOMSON IS A TRAD
OR ITS AFFILIATES USED
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AUDIO AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES
TV SCART
SAT IN
L/R
AUDIO
13/18 V 500 mA max.
ETHERNET USB
USB: 5 V 800 mA max.
13/18 V 500 mA max.
ETHERNET USB
SAT IN
USB: 5 V 800 mA max.
TV SCART
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AUDIO
AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NE PAS OUVRIR
AUDIO
COAXIAL
L/R
S/PDIF
THOMSON IS A TRADEMARK OF TECHNICOLOR (S.A.)
12 V , 1.5 A
RISQUE DE CHOC ELECTRIQUE
OR ITS AFFILIATES USED UNDER LICENSE BY STRONG GROUP.
MAX. 18 W
MODEL DIGITAL SATELLITE HD RECEIVER THS222
13/18 V 500 mA max.
ETHERNET USB
SAT IN
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NE PAS OUVRIR
AUDIO
COAXIAL
L/R
S/PDIF
THOMSON IS A TRADEMARK OF TECHNICOLOR (S.A.)
12 V , 1.5 A
MAX. 18 W
USB: 5 V 800 mA max.
TV SCART
MANUFACTURED UNDER LICENSE FROM DOLBY LABORATORIES. DOLBY AUDIO
AND THE DOUBLE-D SYMBOL ARE TRADEMARKS OF DOLBY LABORATORIES
RISQUE DE CHOC ELECTRIQUE
OR ITS AFFILIATES USED UNDER LICENSE BY STRONG GROUP.
This product has been manufactured and sold under the responsibility of
STRONG Group. THOMSON and the THOMSON logo are trademarks of Technicolor
(S.A.) or its affiliates and are used under license by STRONG Group.
Represented by STRONG Ges.m.b.H. • Franz-Josefs-Kai 1 • 1010 Vienna • Austria
Any other product, service, company, trade or product name and logo referenced
herein are neither endorsed nor sponsored by Technicolor (S.A.) or its affiliates.
Email: support_at@thomsonstb.net
07 Sep 2016 19:31
Your receiver is delivered with USB multimedia support. After downloading the software for recording via USB from the website www.thomsonstb.net, the receiver can be upgraded to support the recording and Timeshift function via USB. This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via USB has not yet been installed.
Licenses
ANY USE OF THIS PRODUCT IN ANY MANNER OTHER THAN PERSONAL USE THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, LLC, 6312 S. Fiddlers Green Circle, Suite 400E, Greenwood Village, Colorado 80111 U.S.A.
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
This product contains one or more programs protected under international and U.S. copyright laws as unpublished works. They are confidential and proprietary to Dolby Laboratories. Their reproduction or disclosure, in whole or in part, or the production of derivative works therefrom without the express permission of Dolby Laboratories is prohibited. Copyright 2003-2009 by Dolby Laboratories. All rights reserved.
07 Sep 2016 16:54
P1
TABLE OF CONTENTS
1.0 INSTRUCTION 3
1.1 Safety Instructions 3
1.2 Storage 3
1.3 Equipment Set-up 4
1.4 Accessories 4
1.5 Usage of external USB devices 4
2.0 YOUR RECEIVER 5
2.1 PIN code default: 0000 5
2.2 Front and side panel 5
2.3 Rear panel 5
2.4 Remote Control 5
2.5 Installing the batteries 7
2.6 Using the remote control 7
3.0 CONNECTIONS 7
3.1 Basic connection using an HDMI cable 7
3.2 Basic connection using a Scart cable 7
3.3 Connecting to digital audio amplifier 8
3.4 Connecting a USB storage device 8
3.5 Connecting multiple fixed LNBs using a DiSEqC switch 8
3.6 Connecting to Ethernet 8
4.0 FIRST TIME INSTALLATION 8
4.1 Dish setup 9
5.0 QUICK GUIDE FOR USING YOUR RECEIVER 10
6.0 OPERATION 10
6.1 Changing channels 10
6.2 Info Banner 11
6.3 Selection of audio language 11
6.4 Teletext 11
6.5 Subtitles 11
6.6 Changing the aspect ratio 11
6.7 Changing the resolution 11
6.8 EPG (Electronic Programme Guide) 12
6.9 Favourite channels 12
7.0 MAIN MENU 12
7.1 Programme 12
7.2 Picture 14
7.3 Channel Search 15
7.4 Time and date settings 20
7.5 Option 20
7.6 System Settings 21
7.7 USB 22
8.0 TROUBLESHOOTING 26
9.0 SPECIFICATIONS 27
P2
1.0 INSTRUCTION
1.1 Safety Instructions
DO NOT INSTALL YOUR RECEIVER:
• In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:
• To direct sunlight or any other equipment that generates heat; to rain or intense moisture; to intense vibration and to any shock which may cause permanent damage to your receiver or to any magnetic objects, such as loudspeakers, transformers, etc.
• Do not use a damaged power cord. It may cause a fire or an electric shock. Do not touch a power cord with wet hands. It may cause an electric shock.
• When the receiver is not used for a long period of time, you should unplug the power cord from the wall socket.
• Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you may clean your receiver with a soft lint-free cloth slightly made damp with a mild soap solution, and only after disconnecting from the mains voltage supply. Make sure no foreign objects fall through the ventilation slots because this could cause fire or an electric shock.
• Do not place any objects on top of the receiver because this might prevent proper cooling of the components inside.
Safety Precautions
• Never try to open the receiver. It is dangerous to touch the inside of the receiver due to high voltages and possible electrical hazards. Opening the receiver will void the warranty of the product. Refer all maintenance or servicing to suitably qualified personnel.
• When you are connecting cables, be sure that the receiver is disconnected from the mains supply voltage. Wait a few seconds after switching off the receiver before you move the receiver or disconnect any equipment.
• It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment. Please ensure that the electrical power supply corresponds with the voltage on the electrical identification plate at the back of the receiver.
If the receiver does not operate normally even after strictly following the instructions in this user manual, it is recommended to consult your dealer.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed to protect against mechanical shocks and moisture. When unpacking it, make sure that all the parts are included and keep the packaging away from children. When transporting the receiver from one place to another or if you are returning it under warranty conditions, make sure to repack the receiver in its original packaging with its accessories. Failing to comply with such packaging procedures could damage the product and void your warranty.
INSTRUCTION
P3
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment. Otherwise, please follow the instructions below:
• Refer to the user manual of your TV and your antenna.
• Make sure that the SCART/HDMI cable and outdoor components are in a good condition and the SCART/HDMI connections are well shielded and from good quality.
This manual provides complete instructions for installing and using this receiver. The symbols serve as follows.
WARNING Indicates warning information. NOTE Indicates any other additional important or helpful information. MENU Represents a button on the remote control or the receiver. (Bold characters)
Move to Represents a menu item within a window. (Italic characters)
1.4 Accessories
• 1x installation instructions
• 1x remote control
• 2x batteries (AAA type)
NOTE: The batteries should not be recharged, disassembled, electrically short-circuited
or be mixed or used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used, we recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of remote control.
1.5 Usage of external USB devices
• It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB 2.0 specifications, multimedia, recording and Timeshift functions of the receiver might not work properly. *
• If you are going to use an external USB HDD (Hard Disk Drive), please consider that the power specifications may exceed the supported output of your receiver (5 V/800 mA). If so, please connect your USB HDD to an according external power adapter.
• THOMSON cannot guarantee compatibility with all types of USB storage devices.
• It is advised not to store important information on USB storage devices used with the receiver. Always make backups of data on your USB storage device before using it with this receiver. THOMSON will not take responsibility for any loss of information or circumstances caused by loss of information.
• Playback of files cannot be guaranteed although extensions are listed, as it depends on codec, data bit rate and resolution used (all MPEG codec formats are supported).
• Please ensure that either the USB device is already formatted to FAT/FAT32, or format the USB device via your receiver, refer to chapter 7.7 USB for details
*This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via USB has not yet been installed.
P4
INSTRUCTION
2.0 YOUR RECEIVER
2.1 PIN code default: 0000
2.2 Front and side panel
1. Power button: Switch the receiver to Standby or On.
2. P-/P+: To change channels without using the remote control
3. Remote control sensor: Receives the signal from the remote control
4. LED display: Shows channel number in operation and time in Standby
5. Standby indicator: Shows power state of the receiver: Red LED - receiver is in
2.3 Rear panel
1. SAT IN To connect to the LNB of your satellite dish for reception of
2. Ethernet To connect to a network switch, router or modem
3. USB For connection of USB device for Multimedia use
4. HDMI To connect to the HDMI input of your TV using a good quality
5. TV SCART To connect to TV using a SCART cable
6. Audio L/R To connect to an analogue amplifier for stereo audio
7. S/PDIF coaxial To connect to a digital or home cinema audio amplifier
8. Power connector The receiver requires a wall adapter, mains voltage input
2.4 Remote Control
1. q Switches the receiver On/Standby
2. ! To turn the sound on or off
3. FAV To access your favourite channels. Toggles between available
4. LIST Shows the recording list*
5. AUDIO Displays the audio selection menu with selections for available
6. 9 To switch between the last viewed channels
7. RED Flexible functions in OSD menu and Teletext
8. GREEN Flexible functions in OSD menu and Teletext.
standby mode
satellite broadcast signal
HDMI cable
100~240V AC 50~60Hz 12V, 1.5A DC output. Please check the local power conditions before connecting the receiver to the mains supply.
favourite groups
languages and audio modes
Fig. 1
Fig. 2
Fig. 3
P5
YOUR RECEIVER
9. YELLOW Flexible functions in OSD menu and Teletext.
10. BLUE In viewing mode: displays the schedule menu for easy setup
11.
Press once to display channel number/name and current/
12. EPG Viewing mode: Displays the EPG (Electronic Programme Guide)
13. pq Switches to the next/previous channel in viewing mode,
14. tu Decreasing/increasing the volume level in viewing mode/
15. OK Viewing mode: Displays the channel list. Menu: activation of the
16. MENU To open the main menu in viewing mode or to go one step back
17. Cancellation of current process/exit from main menu to viewing
18. V+/V- Increases/decreases the volume level in TV mode
19. P+/P- Jumps 10 places up or down in channel list
20. CH+/CH- Channel up/down
21. 0-9 Channel number and numeric value input
22. TV/R Toggles between TV and radio mode
23. No function
24. 2 Hold play during playback
25. 5 Searches backwards during playback. Each pressing increases the
26. 6 Searches forwards during playback. Each pressing increases the
27. 4 Starts recording the currently watched programme*
28. u Starts/resumes the playback.
29. 7 Jumps to the previous file during playback.
30. 8 Jumps to the next file during playback.
31. 3 Stops playback of multimedia files.
32. OPT No function
33. TEXT To open Teletext if available on the current channel.
34. SUB To select subtitles language out of available ones on the current
35. No function
*This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via USB has not yet been installed.
timers; Flexible functions in OSD menu and Teletext.
coming information. Press twice to display detailed event information. Press three times for transponder/signal strength information. Press again to get back to viewing mode
switches to the next/previous page in channel list or moving the highlight up/down in the menu
navigating through the menus/changing values of settings in a menu
highlighted item
in the menu
mode
speed (x2 – x32)
speed (x2 – x32)
channel
P6
YOUR RECEIVER
Loading...
+ 22 hidden pages