Thomson ROC4507 User Manual [ru]

ROC4507

User manual

A B C

dvd

MON 23:58

TV DVD STB

AMP

MACRO HOME CINEMA

SETUP

TV DVD

STB

2 3

5 6

8 9

0 --/-

16/9

EXIT

L1 L2 L3 L4

VOL

PROG

VOL

PROG

ROC 4507

DVD

MON 22:58

SET Zzz

ROC4507

This universal remote control (4 in 1) is compatible with most television sets, DVD players, video cassette recorders,

EXIT

ampliers and Home Cinema systems, as well as with most digital decoders such as satellite or cable receivers, ADSL decoders, etc. These digital decoders are grouped together under the name STB (Set Top Box).

This remote control was factory-programmed in order to allow you to use it immediately with most devices with Thomson group brand names. We suggest that you thus try it out before programming it using one of the methods in this users manual. But rst of all, you must install 2 batteries (AAA - LR03) in it.

Keep this manual and its related documents so that you can refer to them for new programming operations whenever you acquire new devices.

The LCD display always shows the active mode of the remote control (TV, DVD,

etc.) and the current time. These indications will be displayed as long as the batteries are not worn down.

Navigation keys

The navigation keys serve to scan and then select the functions on the LCD display.

The EXIT key serves to return to normal use of the remote control. In some cases, this return to normal is automatic.

Replacing the batteries: The settings for the time, day and date, and the macros are erased while the batteries are

replaced. Other settings entered will be preserved.

The keys and their functions

1 � - On/Standby, or Standby only, depending on the

device.

2 Mode keys – Select the device to be controlled (TV,

DVD, etc.).

3 SETUP – Programing the remote control. 4

Se lec tin g TV c han nels wit h one o r tw o dig its

(- /-) ,

Se lec tin g a p lug/ ex ter nal feed (AV) ,

ch oos ing a mac ro- com man d ( 1/T V, 2 /DV D,

3/ STB ).

5 MENU, 5,6,4,3, OK, EXIT – Access to

the Navigation/Selection, Conrmation menus Exit from the menus.

6 L1, L2, L3, L4 – Additional programmable keys

(learning function).

7 Activating and using Teletext (Videotext, Fastext,

etc.).

8 Playing a disc or cassette. 9 Volume control, Mute ( ), Change T V channel/

station, Display in 16 : 9.

10 Turns on the MACRO mode (sequence of automatic

commands).

11 LCD display a remote control mode (TV, DVD, etc.), b day, date, (press SETUP), c hour, date or code of the device controlled, (press

SETUP or the mode key), d shows transmission to the device, e SET is displayed when the remote control is in

programming mode.

f Sleep timer is programmed g is displayed when a Timer is programmed h Time format AM (morning) / PM (afternoon) when

the time is set in the 12Hr mode. Not shown when in

the 24Hr mode.

Note: The mo de keys are pre- set for the de vices indicat ed

by their icons ( Your remote control allows you to assign to ea ch key a dierent mode from the one indicated on it for all of the mode keys except the the

TV for a TV se t, DVD for a DVD player, etc. ).

STB key, etc).

TV key (e.g., DVD-HDD recorder to

Start set-up

The rst time you install the batteries, instructions will appear in English (SET USING...KEY). Press OK to display

LANGUAGE? ENGLISH then select one of the 7 languages

using the 56 keys and press OK. CONFIRM xxxx (depending on the language selected) is displayed Press

OK > SUCCESS is briey displayed, then CODE SET UP.

When CODE SET UP is displayed, you will have a few seconds to set up the codes for the devices you would like to control with your ROC 4507. Refer to stage 3 of the A, B, C, D programming methods to continue the programming procedure.

Note: TIMEOUT appears when yo u have exceeded the

allotted time for an operation.

Programming the remote control

The SETUP key is used for programming or to access the secondary functions such as, for example, adjusting brightness or contrast on certain TV sets, etc. Programming is required if you wish to control devices of other brands than Thomson.

Access to the secondary functions

Briey press the SETUP key once. The date will show on the screen. Then press the desired secondary function key. The remote control will exit this mode 30 seconds after a key is last pressed or if you press the

EXIT key.

Programming the remote control

Hold down th e SETU P key un til COD E SETU P appe ars on the d ispla y. If you se e SET on th e right si de of the disp lay, th is conf irms that the re mote co ntrol is bein g pro gramme d. Pr essing SET UP re peate dly then all ows you to s croll thro ugh the sett ings opti ons in the orde r gi ven below . You may exit th e prog rammi ng m ode by p ressi ng t he E XIT key or by navi gatin g up to the exit opt ion and confi rming by pres sing OK.

CODE SETUP - Allows you to access one of the

4 programming modes using the OK key. You may thus choose to scroll through the list of codes, enter a code, launch a code search or enter a code based on the brand of the equipment to be controlled (the code booklet comes separately).

SYSTEM SETUP - Allows you to access settings for time,

date, volume, etc. using the OK key.

TIMER SETUP - Allows you to access the Timer settings

using the OK key.

LEARN SETUP - Allows you to access the learning function

of the keys using the OK key.

MACRO SETUP - Consists of dening the sequences of

automatic commands. Each sequence is made up of commands involving several keys (10 keys maximum).

HOME CINEMA SETUP - The Home Cinema mode is

considered to be a «virtual mode» that uses up to 5 groups of keys per mode. By means of this func tion, users can see all of the keys and devices they most often use regrouped under a single «Virtual mode». (See Home Cinema fucntion, Page 6).

EXIT SETUP - Allows you to exit the programming mode

using the OK key.

Note 1: After 15 seconds of inactivity, the remote control

exits the programming mode.

Note 2: If the remote control is searching for a code or

awaiting information,

PLEASE WAIT is displayed.

Testing the remote control

before programming

1. Turn on the device that you wish to control.

2. Press the key that corresponds to the type of device

to be controlled:

TV: TV set, DVD: DVD player/recorder, STB: satellite, cable, ADSL, AMP: amplier

3. Point the remote control at the device to be

controlled and try to turn it o using the � key. If

the device does not go o, you should program the

remote control following one of the procedures A, B,

C or D described below.

Identifying a code: Press and hold a mode key. The

code stored in memory for this mode is displayed (e.g.,

DVD…..0768).

Note: Exce pt f or t he T V ke y, eve ry m ode key ( DVD, etc.)

can be programm ed t o co ntrol a device other tha n t he one ind icated on t he key. It is thus poss ible to as sign, for example, the enter t he code tha t correspo nds to the desired b rand and device follow ing o ne of the proce dures indicated in this manual.

DVD mode to the STB key. You sh ould

Programming the remote control

Setting up the codes

Method A - Programming by scrolling

Used to enter the codes using the list of codes shown on the display.

1. Turn on the equipment that you wish to control.

2. Hold down the SETUP key until CODE SETUP appears

on the display (for 7 seconds).

3. Press OK once to dis play SCRO LL A LIST OF

CODES.

4. Press OK once to display SELECT A MODE KEY.

5. Press once on th e key of the device to be

contr olled (TV, D VD, etc .) t o dis play SELECT

DEVIC E TV?

6. Using the navigation keys (5,6), select the device

(DVD, etc.) then conrm using OK. (for the T V mode

key, only TV may be selected). The rst brand name

and the rst code are displayed (e.g.: ADMIRAL,

0000).

7. Select the brand using the navigation keys 56,

or by selecting the 1st letter of the brand of your

device using keys 2 - 9 (as on a mobile phone: 2=abc,

3=def, etc.) (e.g.: THOMSON : 8 4).

8. Point the remote control at the device and try out

various keys, for example VOL +/-, PROG +/-, etc.

9. If the device responds, store the code using OK.

10. If the device does not respond, change the code using

the 43 keys and try controlling the device again.

11. If you have tried all of the codes for your brand

and the device still does not respond, try Method C

(programming by code search).

Method B - Programming by entering the code

Codes from the separate list (code tables).

1. Turn on the equipment that you wish to control.

2. Hold down the SETUP key until CODE SETUP appears

on the display (for 7 seconds).

3. Press OK once to display SCROLL A LIST OF CODES.

4. Using the navigation keys (5,6), display ENTER

THE CODES then conrm using OK in order to display

SELECT A MODE KEY.

5. Press once on the key of the device to be controlled

(TV, DVD, et c.). The key selected and the code

stored in mem ory for this key are shown on th e

display (e.g.: TV.... .0166).

6. Enter one of the 4-digit codes oered on the list

received separately.

7. The display briey indicates SUCCESS before exiting

the programming mode.

Method C - Programming by code search

Used to manually search for a code in any code library for a family of devices whose code or commercial brand may not be included in the separate list or is led in another fashion.

1. Turn on the equipment that you wish to control.

2. Hold down the SETUP key until CODE SETUP appears on the display (for 7 seconds).

3. Press OK once to display SCROLL A LIST OF CODES.

4. Using the navigation keys (5,6), display SEARCH

FOR THE CODES then conrm using OK in order to

display SELECT A MODE KEY.

5. Press once on th e key of the device to be contr olled (TV, D VD, etc .) t o dis play SELECT

DEVIC E TV?

6. Conrm using OK to display TO SEARCH PRESS …P+ or � (for the TV mode key, only TV can be selected).

7. Point the remote control at the device to be controlled and try to turn it o using the � key.

8. If the device to be controlled goes o, press OK to store the code.

9. If the device does not go o, press the � again several times until the device goes o. Between two presses on the key, leave time for the device to respond (1-2 seconds).

10. As soon as the device to be controlled goes o, press

OK to store the code.

11. The display briey indicates SUCCESS before exiting the programming mode.

Note 1: Each time the (�) key is pressed, the remote control

sends a signal to the device. This signal corresponds to a code in the code library stored in the remote control memory. If you go past the required code, use the key to go back (or advance using library.

Note 2: the indication SEARCHING FOR: remains on display

during this mode.

Programming by search for Brand names

Used to manually search for a brand name (Thomson, Philips, Sony, etc.) in the code library, which generally contains 30 to 40 codes.

1. Turn on the equipment that you wish to control.

2. Hold down the SETUP key until CODE SETUP appears on the display (for 7 seconds).

3. Press OK once to display SCROLL A LIST OF CODES.

4. Using the navigation keys (5,6), display USE

BRAND CODES then conrm using OK in order to

display SELECT A MODE KEY.

5. Press once on t he key of t he de vice t o be cont rolle d (TV, D VD, etc .) to disp lay SE LECT

DEVI CE TV ?

6. Conrm using OK in order to display ENTER THE

BRAND KEY 1-8 (for the TV mode key, only TV can be

selected).

7. Refer to the separate list of codes by brand (this list comes separately) and key in the number (1 to 8) that corresponds to the brand of the device to be controlled. TO SEARCH PRESS P+ OR � is displayed on the screen.

8. Point the remote control at the device to be controlled and try to turn it o by pressing the � key once.

9. If the device to be controlled goes o, press OK to store the code.

10. If the device does not go o, press the � again several times until the device goes o. Between two presses on the key, leave time for the device to respond (1-2 seconds).

11. As soon as the device to be controlled turns o, press

OK to store the code.

12. The display briey indicates SUCCESS before exiting the programming mode.

Note 1: Each time the (�) key is pressed, the remote control

Note 2: The indication SEARCHING FOR remains on display

during this mode.

PROG +) inside the code

Method D

PROG +) inside the code

PROG -

Programming the combo (combined) codes:

for certain combos (TV/VCR, TV/DVD, DVD/VCR, etc.), you will have to press two keys in dierent modes in order

to control the two devices the make up the combo. For example, if you have a TV/DVD Combo, you may have to set a code using the T V key for the TV set AND a separate code (using another mode key) to control the DVD player.

Combo commands:

certai n c ombos (TV /VCR, TV/DVD, DVD/V CR,…) have separate keys o n the or iginal rem ote contro l for select ing the Combo device that you wis h to control. For e xample, if your Combo is a DVD/VCR, its original remote control may ha ve separ ate DVD and VC R keys for selec ting the combo devi ce you wish to control. You may obtain the equivalent key functions on your remote c ontrol using th e M ode and SE TUP ke ys. Supposi ng that your Combo has a DVD and a VC R, and that its code i s pro grammed in D VD mo de, ho ld down t he DVD Mo de key for over 1 s econd in order to send th e DVD key com mand. In o rder to send the VCR key comma nd, press and qui ckly release t he SETUP key, then press and release the DVD Mode key. This procedur e may appl y regardles s of the type of Co mbo (T V/VCR, TV/DVD, DVD/ VCR, etc.), and is avai lable in all modes. This function is n ot guar anteed for all the codes.

System setup

Using the SETUP keys (hold down for 7 seconds), and the navigation keys 5,6,4,3, OK go to the SYSTEM

SETUP screen in order to access the settings for volume,

time, date, backlighting and deleting options. Then navigate using keys 5,6,4,3, OK.

Volume control and Mute setup

This remote control allows you to dene the mode that the Volume and Mute ( ) keys will control. When it is shipped, this remote control is set so that the Volume and Mute keys control the current mode the remote control is in. If this mode does not have a volume control function, then the Volume and Mute keys automatically control the TV mode.

Volume control and mute setup in one mode

Used to assign to one mode (TV or ...) the Volume and Mute keys ( ) without having to selec t that mode during daily use.

1. Using the SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display SET

CODES followed by SYSTEM SETUP (press OK) then VOL/MUTE CONTROL SETUP. (press OK) then SET ALL VOL. TO 1 MODE (press OK) then SET ALL VOL. TO MODE?.

2. Press once on the key of the device to be controlled (TV, DVD, etc.).

3. The screen briey displays PLEASE WAIT then

SUCCESS before exiting this setup.

Note: If the mode selected does not itself display the

Volume/Mute commands, shown on the screen and the remote control exits the setup function and returns to normal operation.

Volume control and mute setup in each mode

Used to assign the Volume and Mute keys ( ), for each mode desired.

1. Using the SETUP keys (hold down for 7 seconds), and navigation keys 5,6,4,3, OK, display CODE

SETUP followed by SYSTEM SETUP (press OK) then VOL/MUTE CONTROL SETUP (press OK) navigate up

to SET VOLUME FOR 1 MODE (press OK) then SET

THE VOLUME FOR MODE?.

2. Press once on the key of the device to be controlled (TV, DVD, etc.).

3. The screen briey displays PLEASE WAIT then

SUCCESS before exiting this setup.

Note: before using this setting, verify that the mode selected

has its own Volume/Mute functions either in the code or by learning; otherwise, the Volume/Mute keys will have no eect.

Resetting the Volume control and mute control

Used to cancel the settings of the preceding paragraphs (return to the default factory-installed settings).

VOLUME CONTROL ERROR is

1. Using the SETUP keys (hold down for 7

seconds), and navigation keys 5,6,4,3,

OK, display CODE SE TUP followed by SYSTEM SETUP (press OK) then VOL/MUTE CONTROL SETUP

(press OK) navigate up to VOL/ MUTE CONTROL

RESET.

2. Press OK once.

3. CONFIRM OK TO RESET is displayed.

OK once to conrm cancellation.

4. Press

5. The screen briey displays PLEASE WAIT then

SUCCESS before exiting this setup.

Setting the time

1. Using the SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display

CODE SETUP then SYSTEM SETUP (press OK) and

navigate up to TIME SETUP.

2. Press OK once.

3. Set the format to 12 or 24 hours using 5,6, and

conrm using OK.

4. Set the hour then the minutes using 5,6,

(move from hours to minutes using OK ) and conrm using OK.

5. The display briey indicates SUCCESS before returning to CODE SETUP.

Setting the date

1. Using the SETUP keys (hold down for 7 seconds) and navigation keys 5,6,4,3, OK, display CODE

SETUP followed by SYSTEM SETUP (press OK) then

navigate up to DATE SETUP

2. Press OK once.

3. Using keys 5,6, and OK, successively set the year, month, date and day.

4. The display briey indicates SUCCESS before returning to CODE SETUP.

Setting the backlight

Used for setting the backlight delay following a key action.

1. Using the

2. Press OK once.

3. Using keys

Note: the default time is 10 seconds. In order to deactivate

the backlight function, set the time to 00 and press once.

4. The display briey indicates

Setting the LCD display langauge

Used to select one of the 7 languages oered by your remote control.

1. Using the

2. Press OK once.

3. Using keys

4. The display briey indicates

Cancelling your settings

Used to recongure the remote control to the default settings by erasing all the settings and storage of codes and keys.

1. Using the

2. Press OK once.

3. Press

4. The display briey indicates

SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display CODE

SETUP then SYSTEM SETUP (press OK) and navigate

up to BACKLIGHT SETUP.

5,6 and OK, set the backlight time,

from 5 to 60 seconds, when BACKLIGHT TIME? is displayed.

returning to CODE SETUP.

SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display CODE

SETUP then SYSTEM SETUP (press OK) and navigate

up to LANGUAGE SETUP.

5,6 and OK, select the language when

LANGUAGE? is displayed.

returning to CODE SETUP.

SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display

CODE SETUP then SYSTEM SETUP (press OK) and

navigate up to SYSTEM RESET.

OK once when CONFIRM OK TO RESET is

displayed.

leaving this setting.

SUCCESS before

PLEASE WAIT before

Setting the Timer

Using the SETUP keys (hold down for 7 seconds), and navigation keys 5,6,4,3, OK, go to the TIMER SETUP display in order to access the stand-by settings for the TV set and 4 other timers that send sequences of at most 4 keys. Then navigate using keys 5,6,4,3, OK.

Automatic sleep setup for the TV set

Used to program the sleep setup for a TV set using the TV Sleep Timer mode (“Zzz”).

1. Turn on the device in TV Mode.

2. Using the

3. Press OK once.

4. Using keys

5. The display briey indicates

6. Press EXIT twice to exit this mode.

Note: The “Zzz” symbol is displayed when a T V Sleep Timer

is set.

7. Set the remote control down on a table or at surface

Note: to clear the programming, navigate up to T V SLEEP SETUP then TV SLEEP CLEAR. Press OK once when CONFIRM OK TO CLEAR is displayed. The display briey indicates SUCCESS before returning to CODE SETUP.

Setting the timer

Used to program up to 4 timers. You may assign up to 4 keys to the Timer so that it will activate at the set time (for example, to change the Mode SAT channel over to 123 at 22:35). The rst key must always be a mode key. The following keys may not include 5,6,4,3, OK EXIT,

MACRO, SETUP, or any other mode key. Timers may only

be set to be activated within the following 24 hour period. Timers are automatically cleared after having been activated. The Timer a Timer is set.

1. Turn on the device in TV Mode.

2. Using the

3. Press

Note: Clear the timer if it already contains a program (see

below).

4. Using keys

6. The indication SELECT TIME R X KE Y? is displayed.

7. The indication

8. The indication

9. The display briey indicates

10. Press EXIT to exit this mode.

11. Set the remote control down on a table or at

Note: the symbol “ ” is displayed when a Timer is set.

SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display

CODE SETUP then navigate up to TIMER SETUP

(press OK) then T V SLEEP SETUP (press OK) then

TV SLEEP SET.

5,6 and OK, select the number

of minutes (from 1 to 90 minutes) before the TV enters sleep mode when TV SLEEP TIME? is displayed.

returning to CODE SETUP.

at the level of the T V set’s infrared receiver with its front end pointed toward the TV set.

SETUP keys, and navigation keys

5,6,4,3, OK display CODE SETUP then OPT ION

SETUP then TIMER SETUP (press OK) then TV SLEEP SETUP then TIMER X SETUP (X corresponds to one of

the 4 timers).

OK once to display TIMER X SET.

5,6, OK, select the desired start time

(hour and minutes), Press OK.

SELECT TIMER X M ODE? is displayed. Using the

mode keys, indicate the device to be controlled (TV,

DVD).

Press once on the key that corresponds to the desired command (e.g. 1).

once on the desired key (e.g. 3) or on OK if you do only want to send one command, and go to Point 10, below.

on the desired key (e.g. 8).

SELECT KEY 2 is displayed. Press

SELECT key 3 is displayed. Press once

returning to CODE SETUP.

surface at the level of the T V set’s infrared receiver with its front end pointed toward the device to be controlled.

SUCCESS before

“ ”

symbol is displayed when

SUCCESS before

Clearing a timer

1. Using the

2. Press OK once to display TIMER X CLEAR.

3. Press OK once to display CONFIRM OK TO CLEAR.

4. Press OK once.

5. The display briey indicates

SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK display

CODE SETUP then OPTION SETUP then TIMER SETUP (press OK) then TV SLEEP SETUP then TIMER X SETUP (press OK) then TIMER X CLEAR.

returning to CODE SETUP.

SUCCESS before

Key learning

This function is used to copy the functions of keys on other remote controls to the keys on your ROC 4507 in the mode and to the keys of your choice. Your ROC 4507 can store up to 150 keys (depending on the format of the IR code to be learned). Only one original remote control may be stored per Mode (refer to the notes concerning learning). The remote control may also be pre-programmed using one of the codes in the library, and copied keys may be «superimposed» on the key positions selected by the user: The remote control can thus be customised by the user, who uses a pre-programmed code, then learn the key functions from his original IR remote control.

Careful: You may not copy onto the Setup, Home Cinema or

Macro keys • All of the commands copied for one mode are erased if an identical or new 4-digit code is entered for this mode (also applies to direct entry of a code, a code search or brand search) • The screen and key backlighting is o during learning.

Advice before you begin:

• Place the remote controls face to face so that the IR LED diodes of the two remote controls are precisely lined up. You may need to adjust the height of the remote controls so that the LED diodes are properly aligned. Verify that the gap between the two remote controls is about 25 mm [1 inch]. Do not change the gap between the two remote controls during the learning of all the keys required for this mode.

• Begin by copying 2 or 3 keys (to get used to it), then perform the “Clear All Learn Modes“ function (clear all learn modes) before learning the entire keyboard of your original remote control.

How to copy (learn) keys

1. Using the

2. Press OK once.

4. Press once on t he key of your RO C 4507 to which

5. The indication

6. While

7. The indication

8. The display briey indicates

Erasing the functions learned in a mode

Erases all the keys copied in a given mode

1. Using the

2. Press OK once to display SELECT A MODE KEY.

3. Press the desired key (T V, DVD, etc.) once to display

4. Press

5. The display briey indicates

SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display CODE

SETUP then navigate up to LEARN SETUP (press OK)

then LEARN ONE MODE (press OK) then SELECT A

MODE KEY.

Press the desired mode key once (TV, DVD, etc.) to display SELECT A MODE KEY TO LEARN

you wish to copy the code of the o riginal remote control.

down the key on the original remote control until

SUCCESS or KEY LEARN ERROR appears on the

display before releasing the key on the original remote control (normally after 2-3 seconds).

displayed. To copy another key, press once on OK then begin again starting with Step 5 or press EXIT once to exit this mode.

LEARNING: PLEASE WAIT appears.

LEARNING: PLEASE WAIT is displayed, hold

OK – LEARN MORE or EXIT? is

leaving this mode.

SETUP keys, (hold down for 7 seconds)

and navigation keys 5,6,4,3, OK, display CODE

SETUP then navigate up to LEARN SETUP (press OK)

then LEARN ONE MODE then CLEAR ONE LEARN

MODE.

CONFIRM OK TO CLEAR

OK once.

leaving this mode.

PLEASE WAIT before

Erasing functions learned for all modes

Erases all the keys copied (overall erasing is recommended for the rst learning)

1. Using the

2. Press OK once to display CONFIRM OK TO CLEAR.

3. Press OK once.

4. The display briey indicates

Notes on learning: Do not tr y to per form lear ning

directl y under fluo rescent lig hts or in weak lighting conditi ons since this co uld cause interf erence wi th the IR transmis sions. Place the remote control at least 1 met re [3 fee t] from any light source • Avoid co pying the volume and mute k eys on your o riginal rem ote control, unless you are sure that th ey a ctivate the same ta rget device; for example , ce rtain origi nal DVD remote cont rols may also include a TV volume/m ute ke y: t hey ma y hav e two differe nt types of codes • Avoid learning DVD keys on your orig inal remote control unl ess you are su re that they activate the same target device; for example, cer tain origina l TV remote controls may als o inclu de a D VD key: they ma y have tw o differen t types of codes • Copying a key m ay t ake up to 3 seconds. Do not relea se t he ke y being copi ed unless the “ screens are displ ayed.

If copying the rst or second keys for a certain mode constantly cause errors, use the following procedure: i. End the learning session by pressing the ii. Clear the commands learned for this mode. iii. Verify that the IR LED’s are properly aligned between the

iv. A just the gap between the two remote controls so as to

v. Try learning the original remote control again for this

If the problem continues for the same key, verify that the key on the original remote control was properly learned; does it send the signals? Does it activate the target device? Try copying this key using a dierent mode. If the learning is correct, the type of code may be dierent from the others and cannot be copied in the same mode.

SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display

CODE SETUP then navigate up to LEARN SETUP

(press OK) then navigate up to CLEAR ALL LEARN

MODES.

leaving this mode.

PLEASE WAIT before

Success” or “ Key Learn Error”

EXIT key.

two remote controls.

reduce or increase the distance (from 15 mm to 50 mm [1/2 to 2»]).

mode.

Macro commands

This function permits storing sequences of commands using the MACRO key. You can program and store up to 3 sequences of successive keystrokes for several keys of your choice. By pressing the respective Macro digital key, this sequence of successive keystrokes (IR commands) is sent. Any sequence of successive keystrokes performed frequently may be reduced to only two commands (MACRO key plus one of the 1, 2 or

3 keys). For example, by pressing MACRO and then only

one key, you can turn on your T V set, display your favorite channel, turn on your VCR and start a recording, etc. You can store a sequence of 10 commands for each 1, 2 or 3 key.

How to set up a macro

Tip: Set up your macro on a sheet of paper by

writing down the ser ies of 10 keystrokes (maximum) th at it is comp osed of. As an example, if you want to turn on your TV set to Channel 3 and th en turn on a satellite receiver to Channel 5, you should write do wn: MACRO, 1 (for sto rage for this key), TV ( �), 3, SAT (�), 5, MACRO.

1. Using the

2. Press once on the 1, 2 or 3 key to which you wish to

4. Press once on the desired mode key (TV, DVD, etc.)

SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display CODE

SETUP then navigate up to MACRO SETUP (press OK) then MACRO KEY SET (press OK) then SELEC T A MACRO KEY.

assign the macro. The indication SELECT MACRO X MODE? appears.

to selec t the device that will receive the command

SELECT MACRO X KEY? is displayed.

Note: The rst key in the Macro sequence must always be

a mode key.

5. Press each of the keys in order that make up the macro.

6. Store the macro by pressing the

7. The display briey indicates leaving this mode.

Note: the Macro is automatically stored the 10th time the

key is pressed.

8. The display br iey indicates this mode.

How to clear a macro

1. Using the

2. Press once on key 1, 2 or 3 of the macro to be cleared

3. Press OK once.

4. The display br iey indicates

How to use a macro

In normal operation, to activate the M acro, press and release the MACRO key, then (within 20 seconds) press and release key 1, 2 or 3 to display MACRO X while the Macro sequence is being run and remote control returns to normal function. While the Macro is being executed, the remote control must be pointed at the devices to be controlled.

Note: if there is no Macro stored for the number key selected,

“Macro X Void“ is displayed.

Notes on macros: The time elapsed between each automatic

command during the execution of a macro is 1/2 second.

For certain commands, you may have to add pauses in a macro sequence (for example, to allow the TV set to warm up). These pauses may be adjusted by using the followed by a number of seconds from 1 to 9. The rst key stored in a Macro sequence must be a Mode key ( The included in a Macro. Press

Setup.

SETUP keys (hold down for 7 seconds),

and navigation keys 5,6,4,3, OK, display CODE

SETUP then navigate up to MACRO SETUP (press OK)

then MACRO KEY CLEAR (press OK) then SELECT A

MACRO KEY.

to display CONFIRM OK TO CLEAR

this mode.

SETUP, HOME CINEMA and MACRO keys may not be

MACRO key once.

PLEASE WAIT before

SUCCESS before leaving

PAUSE key,

TV, etc.).

SETUP in order to exit Macro

Home Cinema Function

The Home Cinema function uses up to 5 devices with

one mode key: the HOME CINEMA key. The 5 devices

correspond to the ve mode keys (TV, DVD, AMP...) that will be associated with predened keys. The keys are: a. The 2 program keys b. The 3 volume c. The 6 run keys Play, Pause, Stop, Fast Forward, Fast

Rewind and Record 7,4,8,=,<,;.

d. Directional keys: up, down, right and left

and the MENU, EXIT, OK keys.

e. For the remaining keys: "base" mode

(any one of the other modes).

Example: In Home Cinema mode, you can set up the

PROG+/ keys to control the satellite receiver, the VOL +/

and ( ) keys to control the amplier, the Run keys (PLAY,

PAUSE, etc.) to control the DVD player, the MENU, EXIT, etc.

keys to control the DVD player, and the other keys to control the TV set.

How to program the Home Cinema function

1. Using the and navigation keys 5,6,4,3, OK, display CODE

SETUP then navigate to HOME CINEMA SETUP (press OK) then HOME CINEMA SET (press OK) then PROG/ CHAN KEY GROUP MODE?.

2. Choose a mode key (TV, DVD, etc.) for the PROG + /

- keys.

VOLUME & MUTE KEYS MODE? appears.

3. Choose a mode key (

/ - keys.

RUN KEYS MODE? appears.

4. Choose a mode key (

7,4,8,=,<,;run keys.

xxx MENU, OK, EXIT MODE? appears

PROG + / -.

VOL + / - keys and the mute ( ) key.

5,6,4,3

HOME CIN EMA

SETUP keys (hold down for 7 seconds),

TV, SAT, AMP, etc.) for the VOL +

TV, DVD, etc.) for the

5. Choose a mode key (TV, DVD, etc.) for the navigation keys MENU, EXIT, OK.

ALL OTHER KEYS MODE? appears.

6. Choose a mode key ( remote control keys to be used for Home Cinema mode.

The display briey indicates SUCCESS before returning to CODE SETUP.

How to delete the Home Cinema function

1. Using the and navigation keys 5,6,4,3, OK, display CODE

SETUP then navigate to HOME CINEMA SETUP (press OK) then HOME CINEMA RESET.

2. Press OK once to display CONFIRM OK TO RESET.

3. Press OK once.

4. The display briey indicates PLEASE WAIT then SUCCESS before returning to CODE SETUP.

Notes on the Home Cinema function: the mode keys SETUP

MACRO are used to exit the HO ME CINEMA mode.

and Learning and Macros do not work in the mode.

TV, DVD, etc.) for the other

PLEASE WAIT then

SETUP keys (hold down for 7 seconds),

HOME CINEMA

Respect the environment and the law! Do not mix differe nt t ypes of batteries

rechargeable batteries. In order to avoid any risk of explosion, observe polarities indicated inside the battery compartment. Replace only with the type of batteries specified above. Do not throw them into fire, do not recharge them. If you are not using the remote control for a long period of time, remove the batteries. Please respect the environment and prevailing regulations. Before you dispose of batteries or accumulators, ask your dealer whether they are subject to special recycling and if they will accept them for disposal.

implemented a specic collection and recycling system for which producers are responsible • This appliance has been designed and manufactured with high quality materials and components that can be recycled and reused • Electrical and electronic appliances are liable to contain parts that are necessary in order for the system to work properly but which can become a health and environmental hazard if they are not handled or disposed of in the proper way • Consequen tly, please do not throw out your inoperative appliance with the household waste • If you are the owner of the appliance, you must deposit it at the appropriate local collection point or leave it with the vendor when buying a new appliance • If you are a professional user, please follow your supplier’s instructions • If the appliance is rented to you or left in your care, please contact your service provider • Help us protect the environment in which we live !

or new and old batteries. Do not use

This symbol means th at your inoperative electronic appliance must be collected separately and not mixed with the household waste • The European Union has

ROC4507 / EN_fr/ Parleclair - rst / 05-2007

Characteristics - Caractéristiques - Eigenschaften -

Caratteristiche - Características - Eigenschappen -

Технические характеристики

Weight = 103 grammes

oids = 103 grammes

Gewicht = 103 Gramm

eso = 103 grammi eso = 103 gramos

Gewicht = 103 gram

вес = 103 грамм

Dimensions - Dimensions - Abmessungen - Dimensioni - Dimensiones Afmetingen - размеры

= 213 x 50 x 21 mm

ROC4507

Dealer's address

Model and serial number

THOMSON Sales Europe

46, quai A. Le Gallo

92648 Boulogne C edex

FRANCE

322 019 4 64 RCS NA NTE RRE

http:// www.t hom sonlink .co m

Universal remote control

Code lists

Subcodes

Подкоды

THOMSON

BRANDT

THOMSON

BRANDT

Sous-codes

Untercodes

Sotto-codici

Subcódigos

Subcodes

Sub-códigos

TELEFUNKEN

SABA

NORDMENDE

AIRD

FERGUSON

TELEFUNKEN

SAB

NORDMENDE

AIRD

FERGUSON

UNDIG

BLAUPUNKT

NOKIA FINLUX

ITT, LUXOR

ANTAX,BEKO

OSONIC

4567

FOR

FUTUR USE

DVD VCR

UPUNKT

BLA

UNDIG

NOKIA FINLUX

ITT, LUXOR

ANTAX,BEKO

OSONIC

456

FOR

FUTUR USE

Kody pomocnicze

Podkódy

Alkódok

Unterkoder

Alakoodit

FOR

FUTUR USE

FOR

FUTUR USE

PHILIPS

ERRES

PYE

PHILCO

RADIOLA

PHILIPS

PYE

PHILCO

RADIOLA

,AKAI

SONY

PANASONIC

JVC, SHARP

OSHIBA

AEWO

SONY

,AKAI

ANASONIC

JVC, SHARP

OSHIBA

AEW

THOMSON

BRANDT

TELEFUNKEN

SABA

NORDMENDE

BAIRD

FERGUSON

GRUNDIG NOKIA

FINLUX

ITT

LUXOR

45678

SAT

FOR

FUTUR USE

FOR

FUTUR USE

PHILIPS PHILCO

PAC E

ECHOSTAR

+ 26 hidden pages