THOMSON DTH4200 - annexe 1 User Manual

Page 1

Precautions

Ensure that the mains supply in your house complies with that indicated on the identification sticker located at the back of your player. Install your player horizontally, on a suitable base (furniture), with enough space around it for ventilation (7-10 cm). Make sure the ventilation slots are not covered. Do not stack other, or heavy devices on top of the player. Do not place the player on amplifiers or other equipment which may become hot. Before moving the player, ensure the disc tray is empty. This player is designed for continuous use. Switching off the DVD player to the stand-by mode does not disconnect the electricity supply. In order to separate the player completely from the mains, it has to be disconnected by unplugging the mains plug, especially when left unused for a long period of time.

Condensation

If your player or a disc have been stored in a cold atmosphere, as for example during transportation in the winter, wait for approximately 2 hours until they have reached room temperature.

Protect the player from moisture and excess heat (e.g. fireplace) or equipment creating strong magnetic or electric fields (i. e. speakers ...). Disconnect the power cable from the mains electricity supply if the player malfunctions. Your player is not intended for industrial use but for domestic purposes only. Use of this product is for personal use only. Copying CDs or downloading music files for sale or other business purposes is or may be a violation of copyright law.

DISCLAIMER OF WARRANTY: TO THE EXTENT ALLOWED BY APPLICABLE LAW. REPRESENTATIONS AND WARRANTIES OF NON-INFRINGEMENT OF COPYRIGHTS OR OTHER INTELLECTUAL PROPERTY RIGHTS RESULTING FROM THE USE OF THE PRODUCT UNDER CONDITIONS OTHER THAN AS HEREABOVE SPECIFIED ARE HEREBY EXCLUDED.

2 - Caution

1 - Setting up

Never open the player or any of its components. It can be dangerous for you or for certain fragile components. You could receive an electric shock or touch the laser beam. Do not place your eyes close to the opening of the disc tray or any other opening to look inside the player.

3 - For your safety

Always handle your discs with care. Hold a disc with fingers on the border or hole. Always place disc with the label facing upward (in case of a single-sided disc). Always place the disc properly into the tray using the proper guide area. Always use a soft cloth to clean discs if necessary, wipe from the centre to the border. Always put discs back into their cases after playing and store in a vertical position.

Never

try to play a Photo CD.

Never

use record cleaning sprays, benzine, static electricity liquids or any other solvent, if the disc surface is dirty. Wipe gently with a soft damp (water only) cloth, never wipe the disc in a circular motion, since circular scratches are likely to occur and could cause noise during playback.

4 - Discs

5 - Batteries

Please respect the environment and prevailing regulations. Before you dispose of batteries or accumulators, ask your dealer whether they are subject to special recycling and if he accepts to take them back.

THOMSON multimedia shall not be responsible if the player is not used according to this manual.

DTH4200-GB-BEI 4/05/00 15:42 Page 1

Page 2

About discs

Discs you can play

NTSC

Digital video discs

Your DVD player responds to the region management information recorded on a DVD disc. The region code for your player is region 2.

So, if you are going to buy a DVD disc, pay attention to the logo: it has to be the right one. ALL means all regions.

Discs you cannot play

Regional code number

Other regions

According to the disc

Functions and information available on the DVD (titles, chapters, time info, sound track languages, subtitles, ratings (age limit), camera angles and more) may differ from disc to disc. Refer to the instructions accompanying the disc. Some discs may have been designed to prevent operations such as: Chapter skip, picture scan, and repeat play.

12 cm and 8 cm, single or double sided, single or dual layer. DVDs are high density optical discs on which high quality picture and audio are recorded by means of digital signals.

12 cm and 8 cm. 12 cm.

Audio CDs

12 cm.

Recordable - CD

12 cm.

Rewritable - CD

MP 3 files on Audio CDs

12 cm and 8 cm (with or without playback control).

Video CDs

In addition to the PAL DVDs and video CDs, you may enjoy your favourite NTSC movies as well (a 60 Hz PAL compatible TV set is required) (For monitors with only NTSC input, please see page 20).

NTSC playback on PAL TV set

CD-I, CD-ROM, DVD-AUDIO, DVD-ROM, DVD-RAM, CDV, CD-G. DVD with regional code other than that of your player. Do not play Photo CD.

1: USA, Canada - 2: Europe, the Middle East, Rep. of South Africa, Japan - 3: Southeast Asia, Taiwan - 4: Central America, South America, Australia, Mexico, New Zealand

5: Russian federation, Africa (except Egypt and Rep. of South Africa), India, Pakistan 6: China.

This symbol on-screen indicates that you have pressed the wrong key or that the requested function is not available.

DVD Disc structure

Title

Chapter

VIDEO CD Disc or CD

Track

structure

CD-R CD-RW

DTH4200-GB-BEI 4/05/00 15:42 Page 2

Page 3

Contents

Before you start................................4-5

Package content - Fit the batteries Basic connections - Initial set-up

DVD remote control.......................6-7

Menus.......................................................8

Info displays..........................................9

Front and display........................10-11

Video and Audio connections.......12

Video connections.............................13

Audio connections.......................14-15

Preferred languages....................16-17

Set-up menus - Player menu language Your preferred languages on discs

Picture setting...............................18-19

“4 x 3” / “16 x 9” TV screen

Picture output.....................................20

SCART Output NTSC Disc Output

3-D Surround / Dialogues languages

..............................................24

Virtual 3-D Surround Sound Audio language

Subtitle languages .............................25

Angle / Zoom......................................26

Repeat Play..........................................27

Repeating sections between AB

Programme Play................................28

Deleting programmed items

Random Play......................................29

To clear Random play

Video CD special...............................30

Using Playback Control (PBC) menu Audio channel Selection

Basic play.............................................21

Playback - Resume memory Stills and frame advance - Slow motion

Scene Access ...................................22-23

Chapter / track skip Fast motion Playback Audio CD: Direct Access to a track Audio CD: Introscan Video CD: Track View / Index View Titles, chapters, tracks, or elapsed time Markers

Basic set-up for the initial

installation of the DVD player.

Playback your Discs, DVD, audio

CD, video CD

Advanced Playback

Set-up

the player, to play discs

the way you want.

Display Options

............................31-32

Still state - On-screen messages Front display panel brightness Black level adjustment

Audio Options....................................33

Dynamic Compression 2x Playback Audio

Rating limit....................................34-35

Rating level selection Player unlock Password change Overriding the Rating limit

Universal remote control..........36-38

To control other devices Brand codes information

Appendix.........................................39-43

Troubleshooting - index Technical data

Guarantee .........at the end of the manual

DTH4200-GB-BEI 4/05/00 15:42 Page 3

Page 4

Before you start

SIZE AA 1,5 V 0%MERCURY

GREENELL

EXTRA HEAVY DUTY

SIZE AA 1,5 V 0%MERCURY

GREENELL

EXTRA HEAVY DUTY

DTH 4200

DVD player

Remote control

Set-up and user manual

Audio - Video cable

Scart cable

Package content

Fit the batteries

Remove the battery cover.

Fit the batteries.

Match + to + and – to –.

Refit the battery cover.

• Remove all packing and check for the items below.

• In the unlikely event that something is missing in the package, please contact your dealer.

Do not mix different types of batteries (alkaline, rechargeable ...) or new and used ones. The pages of this publication are printed on recycled paper.

DTH4200-GB-BEI 4/05/00 15:42 Page 4

Page 5

Before you start

Press 1 for English

Pressez 2 pour Français

Drücke 3 für Deutsch

Premere 4 per Italiano

Pulsar 5 para Español

Tryck 6 för Svenska

Connect all devices before plugging any power cords in the wall outlet. Always turn off the DVD player, TV and other devices before you connect or disconnect any cables. Make sure that colors of connectors and plugs match for the audio connection. Insert all cables firmly into their sockets.

1 Connect your DVD player to the TV with a Scart cable.

2 Connect your DVD player to the mains.

Basic connections

Initial set-up

AV1

1 Press STANDBY / ON on the front DVD panel or press

on the remote control to switch on your DVD player.

• The first time you turn on the DVD, the language menu is displayed. If it is not displayed, select the appropriate AV input of your TV set manually (see the manual of your TV set).

2 Press the appropriate number key on the r emote contr ol to select a language (1 forenglish,

2 for french, ...). If you do not press any number key, you will have to select manually all menus related to the languages.

3 You can now play discs. However we recommend you proceed with other set-up

(p 18-20 / 31-33):

• The menus of the player and the menus, dialogues, and subtitles of DVDs will now be in the language choosen in step 2. This choice applies to all DVDs.T o change the language, see pages 16-17. To temporarily change the language of the dialogues and subtitles, see pages 24-25.

Audio connections (See page 12-14).

Other connections? See pages 12-15.

United Kingdom,

Ireland

Continental Europe

DTH4200-GB-BEI 4/05/00 15:42 Page 5

Page 6

DVD remote control

Comfort functions Power / Stand-by

Playback

To switch your player on and off.

* Press key again to remove display.

To enjoy virtual surround sound, if you only use a stereo TV or 2 speakers (page 24).*

To open or close the disc tray (page 21).

To memorize scenes for replay (page 23).

For random play and programme play (page 28-29).*

To repeat titles, chapters, tracks, or the whole disc (page 27).*

Not available.

For fast reverse or forward and visual search (while playing) in both directions (page 21).

To start playback (page 22).

To stop a disc (to stop completely press twice).

For pause / still picture, frame advance, and slow motion (page 21).

To zoom-in during playback, slow motion or pause mode on the selected area of a scene (page 26).

To also use the remote control with your video-recorder or TV set (page 36-37).

To skip chapters or tracks (page 22-30).

DTH4200-GB-BEI 4/05/00 15:43 Page 6

Page 7

To go back in menu levels (p. 16).

Displays (on and off):

- the disc's menu (if available) during playback (page 24),

- the player's set-up menu after having stopped a disc with the STOP key (page 8, pages 16-17).

DVD remote control

Selections via menu

Menu operation

Displays (on and off) the subtitle language name abbreviation on-screen (page 25).*

Displays (on and off) the dialogue language name abbreviation and the audio format onscreen (page 24).*

Displays (on and off) the disc's special features on-screen (pages 8-9-23).*

Displays (on and off) the disc's contents onscreen (page 8-22).* Introscan for CD Audio/CD Video (page 22).

Displays (on and off) the camera point of view number on-screen (page 26).*

Confirms a selection.

Arrows move to items.

Clears on-screen displays Clears markers in the marker on-screen display (p. 23). Clears program, repeat and random play. (p. 27-28).

Use the number keys to input chapter or track numbers or to select menu items.

Read pages 36-37 on the UNIVERSAL remote control to operate your TV set or video recorder.

* If available

DTH4200-GB-BEI 4/05/00 15:43 Page 7

Page 8

Menus

DISC CONTENTS

Raising

dogs

Food

History

Pedigree

dogs

Player Menu

Info displays

"Disc contents" menu

Move to the items using the arrow keys (18, 16), (14, 17). Press ok (15) to confirm a selection (or use number keys to select without confirmation). Use return (20) key to go back to previous menu. Press info (10), title (12) and menu (19) once again to remove the menus.

Disc Menu

(Example)

1 Language selection 2 Jump to a scene 3 Special features 4 Play the movie

MAIN MENU

▼▲

1 Audio English

2 Subtitles Automatic 3 Player Menu English 4 Disc Menu English 5 Rating Limit L 6 6 Audio Options 7 Display Options

R RETURN ✔ OK

DVD

DISC MENU

Dialogue Language

1 English 2 Deutsch 3 Français 4 Italiano

The info displays and disc menus may differ since they depend on the type and content of the discs (DVD, Audio CD, and Video CD, see pages 9-23-30).

Audio

DVD

To use player or disc Menus

T: 01 02:1 3:4 8

C:23

DVD

T: 01 02:1 3:4 8

ENG 5.1 CH FRA Yes

DTH4200-GB-BEI 4/05/00 15:43 Page 8

Page 9

FRA Yes

FRA 5.1 CHENG 5.1 CH

Info displays

DVD

Track number 01 is being played

An audio CD (CD) or video CD (VCD) is in your player

info key pressed once / Interactive screen

info key pressed twice / Interactive screen

1 Press PLAY (27), to play a disc. 2 Press:

• 1x yellow info key (10) for Info level 1,

• 2x yellow info key (10) for Info level 2.

This page gives you an

overview of the possible

information available on a disc.

ARA _______ Arabic CHI ________ Chinese CZK _______ Czech DAN _______ Danish DEU _______ German ENG _______ English ESP ________ Spanish FRA________ French FIN ________ Finnish GRE _______ Greek HUN _______ Hungarian IND________ Hindi

ITA ________ Italian JPN ________ Japanese NLD _______ Dutch NOR _______ Norwegian POL________ Polish POR________ Portuguese RUS________ Russian SVE________ Swedish TUR _______ Turquish ZAF________ Afrikaans

***

________ Other

Language abbreviations used in the player's menus.

See pages 24 & 25.

Subtitle language Subtitle ON/OFF

Audio language & sound format

With audio CD or video CD

Elapsed time from the beginning of the current track

With DVD disc

A DVD disc is in your player

Title 01 is being played

Chapter 23 is being played

Elapsed time from the beginning of the current title

• For some DVDs which offer a DVD menu, you can also press the menu key (19) during playback and follow the steps offered by the disc-specific menu to make your dialogue, subtitles, language selection according to what is available on that particular disc.

ENG DOLBY DIGITAL 5.1 CH

FRA Yes

T: 01 02:1 3:4 8

C:23

DVD

T: 01 02:1 3:4 8

T: 01

02:1 3: 48

C:23

T: 01

DVD

DTH4200-GB-BEI 4/05/00 15:43 Page 9

Page 10

Front…

STANDBY / ON: The RED indicator lights up, when the player is first plugged in Standby

Mode. When “STANDBY / ON” key is pressed again, the RED light goes out and the player is turned on.

DISC TRAY

OPEN / CLOSE: Press to open and close the disc tray.

SKIP: Press |

ÃÃ (21) once to skip to the beginning of the current chapter / track (twice for the previous one). Press ¨¨| or |ÃÃ (21) repeatedly to go to the next or previous track/chapter; press as many times as the number of required track/chapter skips (p. 22).

SEARCH: Press and hold ¨¨| or |ÃÃ (21) for Start Reverse or Forward fast motion

playback, then press repeatedly for higher speeds (DVD: x2, x4, x8, x16, x32 - CD: x4, x8) (p. 22).

STOP: Stops disc play.

PLAY / PAUSE: Begins disc play (and closes disc tray if open), or pauses disc play.

3-D SURROUND: Allows you to turn the 3-D Virtual Surround feature on and off (p. 24).

Front Panel Display: (See following page for details).

2 3

45678

DTH4200-GB-BEI 4/05/00 15:43 Page 10

Page 11

…and display

11 12 13 14 15 16 17 18 19 20 21 22 23 24

Indicates that the Angle feature is available (you can select multiple angles of a scene recorded by different cameras). Indicates a video CD (VCD), audio CD (CD) or DVD (DVD) disc is loaded in the player. Indicates playback direction. Lights when 3-D Surround is turned on. Indicates repeating or programming of the titles, with REP, ALL and PROG. Indicates repeating or programming of the chapters, with REP, ALL and PROG. Indicates repeating or programming of the tracks, with REP, ALL and PROG. Indicates that the A-B Repeat is in use. Indicates that the Repeat All feature is in use (ALL1). Indicates that the Repeat mode is set (REPEAT). Indicates that LPCM sound is available on DVD disc. Indicates that Dolby Digital sound is available on DVD disc. Indicates that DTS (Digital Theater System) sound is available on DVD disc. Indicates that MP3 sound is available on CD disc. Indicates that MPEG sound is available on DVD disc. Indicates the DVD modes:

PLAY, STOP, LOAD, RANDOM, NO DISC:

ex: Load: The player is loading information from the disc.

page 26

page 24 page 27 page 27 page 27 page 27 page 27 page 27

232411 12

10 13 14 15 17 19 2018 16

DTH4200-GB-BEI 4/05/00 15:43 Page 11

Page 12

Video and Audio connections

If the S-Video / RGB SCART socket is not free.

You need a special S-Video cable (not provided) for the video connection and a Cinch cable for audio left and right inputs (provided).

Connect your DVD player to your TV set with only one video cable - either SCART, or S-Video, or Video (Cinch).

When using the S-Video or video (cinch) connection,

(Not required when using the SCART connection). Manually select the correct AV input and the TV screen aspect on your TV set: 4 x 3 or 16 x 9 (see your TV user's manual). In this case, do not connect any device to the AV2 socket of the DVD player, because the picture of this other device will not appear on your TV screen.

Connections to an Audio system or / and a TV

DIGITAL

AUDIO OUT

DIGITAL

AUDIO OUT

COAXIAL

R L

OPTICAL

ANALOG AUDIO OUT VIDEO OUT S-VIDEO OUT

AV1 (TV)

S-Video

Video Input

Audio Inputs Digital Audio Input

Scart Input

DVD

Audio System

or TV

Audio

System

Good picture

Better picture

Best picture

(if RGB is selected in

SET UP MENU) (p. 20)

Method 1 Method 2 Method 3

S-Video Cable

Scart Cable

AV CableAV Cable

Coaxial

Cable

Optical

Cable

OROR

* * *

: Cable not provided.

DTH4200-GB-BEI 4/05/00 15:43 Page 12

Page 13

Video connections

A Connecting a video recorder and a

decoder (for pay TV)

B Connecting to a TV with two SCART

sockets

C Connecting a satellite receiver, video

recorder and decoders

In order to ensure high picture quality, first connect your DVD player directly to your TV set, and then perform the connections to your other audio / video equipment. Also consult the user's manual of additional devices for further information. See page 20, SCART Output selection for AV1: Video / S-Video / RGB.

In accordance with the DVD standard, your DVD player is equipped with a Copy Protection Device, which can be triggered on and off by the DVD disc itself, in order to make any recording of the concerned DVD disc onto a videotape of very poor picture quality, or even impossible. “This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home use only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.”

RGB signal or Video signal

Only if VIDEO and DECODER do not need to display their Menus via RGB TV input.

Possible connections to other Video devices

DVD copy protection

AV1AV2

AV1

DÉCODER

DECODER

VIDEO

SAT

TV DECODER

AV2/DECODER

AV2/EXT

AV1/TV

VIDEO

DVD

DECODER 1

DECODER 2

AV2/DECODER

AV1/TV

AV2/DECODER

DTH4200-GB-BEI 4/05/00 15:43 Page 13

Page 14

When connecting the optical audio digital cable:

1. Remove the protection cap from the connector and

connect it firmly as shown on the drawing.

2. Keep the protection cap and always reattach the cap

when the connector is not in use, to keep it dustfree.

Audio connections

• The SCART connector delivers the same audio content as the 2 cinch audio out jacks.

Reading a DVD disc whose selected track is in Dolby Surround, Dolby Digital or multichannel MPEG:

• Activate the Dolby ProLogic decoding mode on your amplifier.

A Connecting a mini HiFi system, a stereo amplifier or a Dolby Pro Logic

Amplifier / Dolby Decoder

Analog connection:

Cinch Audio cable

Hifi system / stereo Amplifier/ Dolby

Pro Logic Amplifier / decoder

CD IN / AUX IN

Possible connections to other Audio devices

Dolby Digital

DTS is a digital Sound compression

technique. “DTS” and “DTS Digital” are trademarks of Digital Theater Systems, Inc.

Logo registered by PHILIPS Corp.

MPEG Multichannel

DIGITALOUT

Dual connection: digital and analog.

• Select the type of digital audio output in the set-up menu (see page 15) to deliver:

• In digital: the Dolby Digital as a digital data “BITSTREAM”.

• In digital for the DTS (Digital Theater Systems) signal, select DTS ON.

• In analog: the multichannel MPEG-2 audio signals, as an analog PCM stream.

*Coaxial audio cable or optical digital

audio cable (not included)

B Connecting a 5.1 channel Amplifier / Dolby Digital Decoder

Amplifier / Decoder

Dolby Digital

Cinch audio cable

AV1/TV

DTH4200-GB-BEI 4/05/00 15:43 Page 14

Page 15

Audio connections

Caution for the optical / coaxial digital audio output connector:

• When connecting an amplifier (with an optical/coaxial digital input connector) which does not

contain the Dolby Digital decoder or DTS decoder, be sure to select:

- “Dolby Digital” = PCM

- “DTS” = Off

of the initial setting “Digital Audio Out”. (See above).

Do not use ...

the “Digital Audio Out” jacks to connect to an equipment other than a Dolby Digital, DTS, or MPEG 2 receiver or a suitable decoder. Such a connection can create a high level of noise that may be harmful to your ears, and could damage headphones or speakers. Older digital equipment, some of which are not fully compliant with IEC 958, are likely to cause this problem. If you encounter this problem, use the “digital audio out” menu (see above) to convert the Dolby Digital digital audio bitstream output to linear PCM. The same should be applied with the so-called “optical or coaxial REC.OUT jack” of Dolby Digital decoders, when they are connected to this DVD player. Since REC.OUTis a 1: 1 copy of the decoder's input, no other equipment should be connected there.

According to the audio devices connected to the digital output of this player (coaxial or optical), select one of these options.

• See also the Audio connection pages 12-14.

Digital audio output

1 If a disc is playing, press STOP (29). 2 Call the “MAIN MENU” with the menu key (19). 3 Select “Audio options”; press key number 6 (24). 4 Select the menu items with the number 1, 2 and

3 numeric keys and set with the arrows (18, 16).

5 To exit “MAIN MENU”, press return (20) twice .

* If the DVD disc contains an audio format of higher quality than 48kHz/16bit (maybe 96kHz/ 24bit), the player has to convert into a format compatible with DAT or MD. ** In this case you do not hear the highest sound quality possibly recorded on the disc (via the AUDIO OUT analog output neither).

AUDIO OPTIONS

▼▲

1 Dolby Digital Out CBPCM

2 MPEG-2 Digital Out PCM 3 DTS Off 4 Dynamic Compression On 5 2x Playback Audio On

R RETURN ✔ OK

Available Digital Decoder → Dolby Digital MPEG2 DTS

menu items → 1 2 3

CONNECTIONS:

dubbing*: DVDs to DAT or MD PCM PCM Off Dolby Digital decoder Bitstream PCM Off MPEG2 decoder PCM Bitstream Off Dolby Digital + MPEG2 decoder Bitstream Bitstream Off (older) D/A -converter** PCM PCM Off nothing connected without importance Off DTS decoder PCM PCM On

→

DTH4200-GB-BEI 4/05/00 15:43 Page 15

Page 16

Preferred languages

Set-up menus

Player menu language

ok key

return key

1 If a disc is playing, press STOP (29). 2 Call the “MAIN MENU” with the

menu key (19).

3 Make your selection with the ,

arrows (14, 16, 17, 18).

4 Use ok (15) to confirm a selection

(or use number keys (24) to select and confirm at once).

5 Use return key (20) to go back to

previous menu.

• 1 Audio to set preferred dialogue language.

• 2 Subtitle to set preferred subtitle language.

• 3 Player Menu to set language of the player menu.

• 4 Disc Menu to set language of the disc menu.

• 5 Rating Limit to set parental lock level to skip over scenes that may be unsuitable.

• 6 Audio Options to set audio option according to the connected devices (p 15-33).

• 7 Display Options to set screen options according to the connected TV (p 18-19 / 31-32).

Configure this setting if you want to change the language of the player’s menus (not necessary after initial set-up, page 5).

1 If a disc is playing, press STOP (29). 2 Call the “MAIN MENU” with the

menu key (19).

3 To change player menu language

, select “Player Menu”; press key number 3 (24).

4 Make your selection with the

number keys (24).

5 Press return (20) to exit “MAIN MENU”.

• If you want to exit set-up menu, press

return (20) (repeatedly).

MAIN MENU

1 Audio English

2 Subtitles Automatic

▼▲

3 Player Menu English

4 Disc Menu English 5 Rating Limit Unlocked 6 Audio Options 7 Display Options

R RETURN ✔ OK

MAIN MENU

1 Audio English

2 Subtitles Automatic

▼▲

3 Player Menu English

4 Disc Menu English 5 Rating Limit Unlocked 6 Audio Options 7 Display Options

R RETURN ✔ OK

PLAYER MENU LANGUAGE

▼▲

1 English

2 Français

3 Deutsch 4 Italiano 5 Español 6 Svenska

R RETURN ✔ OK

DTH4200-GB-BEI 4/05/00 15:43 Page 16

Page 17

Preferred languages

Your preferred languages on discs

Your preferred languages for dialogues, subtitles and menus are those that the player selects for you automatically for all discs (if available). Of course you can change them for each disc (page 24-25).

There is no need to make the following settings, as language selection during basic set-up (page 5) has automatically performed these settings: If you selected “English” you now have

• the main menu, in English,

• the menus of the disc, in English (if available),

• the language of the dialogues, in English (if available),

• subtitles in English automatically (if available), if there are no dialogues in English.

If there is no English on the disc for menus, dialogues, and / or subtitles, the player selects the default language of the disc.

1 If a disc is playing, press STOP (29).

2 Call the “MAIN MENU” with the menu key (19).

3 Select the language you want.

a For the Audio

dialogue language press key

number 1 (24).

• If “Original” is selected, the player will choose the language defined as prioritary on the disc.

b For the Subtitle language

press key number 2 (24).

• If “Automatic” is selected, the player will choose the same language as under “Audio Preference” for subtitles.

That means, if your preferred dialogue language (Audio) is available, subtitles are not shown and if your preferred dialogue language is not available on the disc, subtitles are shown (if available).

c For Disc menu language

press key number 4 (24).

4 Make your selection with the number keys.

The previous menu is then displayed (step 2).

• If your language is not listed in the menu, select “Other” and select the preferred language from the list.

5 To exit “MAIN MENU” press return (20).

MAIN MENU

▼▲

1 Audio English

2 Subtitles Automatic 3 Player Menu English 4 Disc Menu English 5 Rating Limit Unlocked 6 Audio Options 7 Display Options

R RETURN ✔ OK

DISC MENU LANGUAGE

Cesky

▼▲

Afrikaans

Dansk Arabic Magyar Chinese Nederlands Greek Norsk Hindi Polski Japanese Portuguës Russian Suomi Turkish

R RETURN ✔ OK

AUDIO LANGUAGE

1 English 2 Français 3 Deutsch 4 Italiano 5 Español 6 Svenska 7 Originale

▼▲

8 Others

R RETURN ✔ OK

SUBTITLE LANGUAGE

1 Automatic

▼▲

3 English

3 Français 4 Deutsch 5 Italiano 6 Español 7 Svenska 8 Others

R RETURN ✔ OK

DISC MENU LANGUAGE

▼▲

1 English

2 Français

3 Deutsch 4 Italiano 5 Español 6 Svenska 7 Others

R RETURN ✔ OK

DTH4200-GB-BEI 4/05/00 15:43 Page 17

Page 18

Picture setting

Select picture format according to your TV screen, Wide-screen (16 x 9) or conventional size (4 x 3) (see p.19).

"4 x 3" / "16 x 9" TV screen

1 If a disc is playing, press STOP (29).

2 Call the “MAIN MENU” with the menu key (19).

3 Select “Display options”, press key number 7 ( 24).

4 Select “Screen format”, press key number 1 (24).

5a You have a classical (4x3)

TV screen.

Press key number 2 (24), if you want to see the total 16x9 screen.

• With a 16x9 movie, you will see black strips appear at the top and bottom of the screen.

Press key number 1 (24), if you want to see the central position of the 16x9 screen (the sides of the 16x9 movie picture may be cut off).

• With a 4x3 movie, you will have the full size picture.

5b You have a wide-scr

een (16x9) TV set.

Press key number 3 (24).

• With a 16x9 movie you will have the full size picture.

• With a 4x3 movie you will see black strips appear at left and right side of the screen.

6 To exit “MAIN MENU” press twice return key (20).

DISPLAY OPTIONS

▼▲

1 Screen Format

16x9 Wide

2 Still state

Auto

3 On Screen Messages On 4 Display Brightness Auto Dim 5 Black Level Normal 6 NTSC Disc Output PAL 60 Hz 7 SCART Output Video

R RETURN ✔ OK

16x9 movie

(4x3) TV screen.

(16x9) TV screen.

4x3 movie

Screen Format

▼▲

1 4x3 (Pan & Scan)

4 x 3 LB (Letterbox)

16 x 9 Wide

R RETURN ✔ OK

MAIN MENU

1 Audio English

2 Subtitles Automatic 3 Player Menu English 4 Disc Menu English 5 Rating Limit Unlocked 6 Audio Options

▼▲

7 Display Options

R RETURN ✔ OK

16x9 movie 4x3 movie

• TV zoom function Do not use the zoom function on yourTV for this set-up, as parts of the picture and menu could be hidden.

• When using the S-video or video connection, unlike when using the SCART connection, the TV screen aspect has to be selected manually on your TV set.

• Use the arrows (14, 17) for selection and press ok (15) to confirm.

DTH4200-GB-BEI 4/05/00 15:43 Page 18

Page 19

Picture setting

Aspect ratios of the TV screen

• The images which appear on the TV screen, and what each screen mode is called, may differ depending on the manufacturer of the TV set or on the type of the TV set. Consult the instruction manual provided with your TV set.

Images which appear on the TV screen differ depending on the type of software and the TV set connected.

Type of software

For wide-screen

(foreseen in

Pan & Scan)

Right and left edges

are cut off.

Full screen Top and bottom edges

are cut off.

Full screen

For wide-screen

(not in Pan & Scan)

Letterbox

(with black bands

at top and bottom).

(4:3)

Full screen Full screen

Top and bottom edges

are cut off.

(4:3, Letterbox) Letterbox

(with black bands

at top and bottom)

Screen horizontally

enlarged (with black

bands at top and

bottom)

Full screen

Screen horizontally

enlarged without

deformation (with

black bands at top and

bottom)

TV set connected (Screen mode)

4:3 16:9 (“FULL” mode) 16:9 (“ZOOM” mode) 16:9 (“AUTO” mode)

Full screen (with black bands at left and right)

DTH4200-GB-BEI 4/05/00 15:43 Page 19

Page 20

Picture output

Select what kind of signal the player will supply to the SCART input of your TV set. Refer to your TV's user manual to see what kind of high quality picture format that your TV can receive via the SCART socket.

• See Video connections pages 12-13.

• Be sure to have performed the appropriate settings on your TV too.

• Use the arrows (14, 17) for selection and press ok (15) to confirm.

• If your TV can receive s-video (Y/C) and RGB via SCART socket, select RGB (player and TV).

SCART Output

1 If a disc is playing, press STOP (29) then display the

“MAIN MENU” with the menu key (19).

2 Select “Display options”, press key number 7 (24).

3 Select “SCART Output”, press key number 7 (24).

4a If your TV can receive RGB, select “RGB”.

(recommended selection) with the arrows (18, 16).

4b If your TV can receive s-video (Y/C) via the SCART

socket, select “S-video” with the arrows (18, 16).

4c If your TV can only receive normal (composite) video data

via the SCARTsocket, select “Video” with the arrows (18, 16).

5 T o exit “MAIN MENU”, press twice return (20).

• If you want to record in S.VHS quality, you must select “S-video” for the SCART signal output to your TV (If RGB is selected, there will be no output on the S-Video Hosiden plug or SCART AV2 connector).

DISPLAY OPTIONS

1 Screen Format

16x9 Wide 2 Still state Auto 3 On Screen Messages On 4 Display Brightness Auto Dim 5 Black Level Normal 6 NTSC Disc Output PAL 60 Hz

▼▲

7 SCART Output CBVideo

R RETURN

NTSC Disc Output

1 If a disc is playing press STOP (29) then display the “MAIN

MENU” with the menu key (19).

2 Select “Display options”, press key number 7 (24).

3 Select “NTSC Disc Output”, press key number 6 (24).

4 If your monitor has only a NTSC video input, select

“NTSC”, using arrows (18, 16). If not, leave “PAL 60 Hz” (default setting: ex factory).

5 To exit “MAIN MENU”, press twice return (20).

DISPLAY OPTIONS

1 Screen Format

16x9 Wide 2 Still state Auto 3 On Screen Messages On 4 Display Brightness Auto Dim 5 Black Level Normal

▼▲

6 NTSC Disc Output CBPAL 60 Hz

7 SCART Output Video

R RETURN

DTH4200-GB-BEI 4/05/00 15:43 Page 20

Page 21

1 Press PLAY (27) to start playing the disc. 2 To see the pictures, press PAUSE (30) on the remote control repeatedly, to see the pictures one

after another.

• PLAY key (27) resumes playback.

• It is only possible to go from one picture to the other in forward mode.

• If the player is left for 5 minutes in PAUSE mode, it will STOP.

Stills and frame advance (DVDs and Video CDs)

Slow motion (DVDs and Video CDs)

1ststep

step

1 Press PLAY (27) to start playing the disc. 2 Press PAUSE (30) for a still. 3 Start backwards or forwards slow motion using REV (26)

or FWD key (28).

• Press repeatedly for higher speeds (3 steps).

• PLAY key (27) resumes playback.

- 1/8

- 1/4

- 1/2

+ 1/8

+ 1/4

+ 1/2

Basic play

Resume memory

If you pressed STOP (29) or BB(STANDBY) (11), the player has memorised the last scene on the disc. If you now press PLAY (27), playback starts from this point. To erase Resume memory, press

STOP (29) twice or take the disc out (but do not press BB). Resume memory does not work with

interactive discs (without elapsed play time information).

• No sound will be heard on discs during STILLS and FRAME ADVANCE and SLOW MOTION.

• No reverse slow motion for Video CDs.

1 Open the disc tray with the OPEN / CLOSE key on the set

or on the Remote Control.

2 Place a single-sided disc with label facing upwards.

(double-sided discs have a small label on both sides near the center).

3 Press OPEN / CLOSE again to close the drawer.

• Some discs may display a menu automatically: Follow on-screen help.

Choose a menu item with the , arrows (18, 16,

14, 17). Press ok (15) to confirm.

4 To start playback, press PLAY (27).

To start playback from a specific title/chapter/track, press yellow info key (10).

5 Press STOP key (29) once to stop playback.

• This location on the disc is memorized by the player, see

Resume memory below.

• If the player is left in STOP mode for more than 1 minute without any user interaction, a screen saver will be activated. The TV screen will fade in/out repeatedly. Press PLAY (27) to resume normal playback.

• After about 30 minutes have elapsed in STOP mode without user interaction, the player will be automatically switched off.

Switch on your DVD player and TV set. Select the correct AV input on your TV, if necessary. You may also turn on your hifi system and select AUX,CD or DVD (properly connected to the player). Please see pages 22-30 for audio CD / video CD specials.

Playback

DISC CONTENTS

Raising

dogs

Food

History

Pedigree

dogs

12 cm discs

8 cm discs

DTH4200-GB-BEI 4/05/00 15:43 Page 21

Page 22

Scene Access

During playback to skip to next or previous chapter / track.

• Press |ÃÃ (21) once to skip to the beginning of the current chapter / track (twice for the previous one).

• Press ¨¨| / |ÃÃ (21) repeatedly to go to the next or previous track/chapter; press as many times as the number of required track/chapter skips.

Chapter / track skip (For Video CDs: See page 30)

Fast motion Playback / Picture and track scan

1 Press PLAY (27) to start playing a disc. 2 Start Reverse or Forward fast motion playback:

On the Remote Control:

• Using REV key (26) or FWD key (28).

• Press repeatedly for higher speeds (DVD: x2, x4, x8, x16, x32 - CD: x4, x8).

• While in search mode on DVD no sound will be heard, except in (2x), if proper selection has been made (p 33).

• PLAY key (27) resumes playback.

step

32x

reverse forward

DVDs:

CDs:

Desired music or video display can be accessed directly without using the menu function.

• Track View is used for showing the beginning view of each track and the track number.

• Index View is used for showing the 9 views of the current playing track.

1 Press blue “title” key (12) during playback. 2 Press the arrows (14, 17) to select

“Track View” or “Index View”.

3 Press ok (15) to confirm. 4 Select the desired view with the (14, 17) or (18, 16) arrows.. 5 Press ok (15).

When in VCD 2.0 mode with Playback Control this function does not work. In stop mode, press blue “title” key (12) and display the “Track View” directly.

Video CD: Track View / Index View

Audio CD: Introscan

With Introscan, you can listen to the beginning of each track for about 10 seconds.

1 Press blue “title” key (12) on the remote control during CD playback. “Intro” will appear on

the top left corner of the TV screen (“INTRO” appears on the display of the player).

Audio CD: Direct Access to a track (without TV screen)

1 Enter the desired track number with the number keys (24).

VCD

1 Track View 2 Index View

DTH4200-GB-BEI 4/05/00 15:43 Page 22

Page 23

Scene Access

Titles, chapters, tracks, or elapsed time

A DVD may contain several titles, which could be different movies or video programmes. These titles may be divided into chapters each of which is numbered, to provide quick access to specific parts of the DVD. Tracks give you a quick access to specific parts of the audio CD and video CD.

1 Start playback with the PLAY key (27). 2 Press yellow info key (10): 3 Select “ ” (title), “ ” (chapter), “ ” (track) or “ ” (elapsed time) with the (18,

16) arrows.

• Some discs cannot be searched, even if the elapsed time is displayed.

4 Select titles / chapters / tracks with the arrows (14, 17) or directly enter a figure with the

numeric keys.

• If you select an amount of time not existing on the disc, “ ” may then appear on-screen.

5 Press ok (15) to start playback. 6 Press yellow info key (10) twice to exit the display.

The player can memorise up to 3 locations on the disc, as long as the disc remains loaded. This function operates only with discs showing the elapsed time (not on Video CD with PBC - Menu “ON” mode).

1 During play, press marker key (4) on the remote

control. The “marker” display appears on-screen.

2a Placing markers (3 maximum)

1 Select one of the 3 marker fields with the

arrows (18, 16).

2 To place the marker, press ok (15) as soon as you

see the wanted scene. A number now appears in that marker field.

• “–” indicates : no marker has been recorded yet.

2b To play a marked scene

1 Select one of the numbered marker fields using

arrows (18, 16).

2 Press PLAY (27), playback starts from the

marked point. Some subtitles around the marked point may fail to appear.

2c To erase a marker

1 Select one of the numbered marker fields you

want to delete using arrows (18, 16).

2 Press clear key (25) to delete a bookmark

number.

3 Exit the display with the marker key (4).

Markers (DVDs and Video CDs)

Markers are cleared when the tray is

opened and / or when power is turned off.

T: 01 02:1 3:4 8

C:23

DVD

1 2

PLAY CLEAR

1 2

PLAY CLEAR

1 2

PLAY CLEAR

DTH4200-GB-BEI 4/05/00 15:44 Page 23

Page 24

3-D

Surround / Dialogue languages

If you use a stereo TV or a two-channel stereo system, be sure that in the audio options of the setup menu, “Dolby Digital Out” and “MPEG-2 Digital Out” are set to “PCM” (see page 15).

Virtual 3-D Surround Sound (for DVDs, Video CDs, Audio CDs)

1 Press PLAY (27) to start playback. 2 Press surround “ ” key (6) on the remote control, to display the

3-D surround sound strip.

3 Press the arrows (14, 17) to change the setting. 4 Press surround “ ” key (6) to remove the display.

• For optimum effects it is recommended that the distance between the TV set and the listening position should be about 3 or 4 times the distance between the front speakers.

• Turn off the TV set surround sound and other surround effects (HiFi system).

• 3-D surround does not work with LPCM or DTS sound tracks of DVD discs, or with DTS track of Audio CDs. It is possible only on DVDs with Dolby Surround or Dolby Digital.

• This feature only operates from the Analog Audio out and from the Scart connector. It will not operate from the Digital Audio Out (coaxial / optical), if “Digital Audio Out” or “MPEG- 2” Digital Out” are set to “BITSTREAM” in the Audio options of the setup menu (see page 15).

• The simulated surround effect depends on the disc contents.

• You can also press the 3D Surround key on the front panel to switch “On” or “Off” the function.

• This technology is manufactured under license from Desper Products Inc.

• ”SPATIALIZER R”, “N-2-2 TM” and the “Circle in square” are Trademarks owned by Desper Products Inc.

Audio language (for DVDs)

A movie or video programme may be recorded in more than one language (up to 8) on the disc. So you can hear the dialogue in your own language (if available) or in the original language of the movie. Set-up, page 5. You have to perform either A or B setting.

B - Using the Disc Menu (if available).

1 Press PLAY (27) to start playback. 2 Press the menu

key

(19); the menu of the disc appears onscreen with (possibly) the Audio languages for dialogues available on that particular DVD disc.

3 Select the desired language with the arrows (14, 17),

then press ok (15) to confirm.

A - Using the player info display.

1 Press PLAY (27) to start playback. 2 Press the red

key

(8); the audio display appears on-screen with (possibly) the abbreviation of the language and the corresponding audio format.

3 Select a language with the arrows (14, 17) . 4 To exit the Audio display, press the red

key

(8).

• Press clear (25) to remove the banner without making changes.

• With some discs, it is possible to change the language of a film and its subtitles. Two coloured keys ( , ) on your remote control offer easy access to this function while viewing.

• Some DVDs provide a disc menu. T emporary change of languages (audio, subtitles) may also be possible by pressing the menu

key

(19) during playback.

DISC MENU

Dialogue Language

1 English 2 Deutsch 3 Français 4 Italiano

Off

ENG DOLBY DIGITAL 5.1 CH

FRA MPEG-2 2 CH

DTH4200-GB-BEI 4/05/00 15:44 Page 24

Page 25

Subtitle languages

Subtitle language (for DVDs)

1 Press PLAY (27) to start playback. 2 Press the green key (9); you see the

subtitles display on-screen with (possibly) the abbreviation of the language.

3 Use the arrows (18, 16) to highlight “On”. 4 Use the (18, 16) arrows to switch “On” or “Off” the subtitles. 5 To exit subtitle display press the green key (9).

• If the abbrevation of the language is not available “***” appears on the screen

• Press clear (25) to remove the banner without making changes.

Subtitles in many languages (up to 32) may be recorded on a DVD. See pages 16-17 how to define your preferred language. You have to perform either A or B setting.

Subtitles on / off (for DVDs)

1 Press PLAY (27) to start playback. 2 Press the green key (9); the subtitle

display appears on-screen with (possibly) the abbreviation of the language.

• When no subtitles are recorded, “***” will be displayed instead of the languages abbrevation.

3 Select another language number with the arrows (14, 17). 4 To exit subtitle display press the green key (9).

• Press clear (25) to remove the banner without making changes.

1 Press PLAY (27) to start playback. 2 Press the menu key (19); the menu of the disc appears

on-screen with (possibly) the subtitle languages available on that particular DVD disc.

3 Select the desired language with the arrows (14,

17), then press ok (15) to confirm.

• With some discs, it is possible to change the language of a film and its subtitles. Two coloured keys ( , ) on your remote control offer easy access to this function while viewing.

• Some DVDs provide a disc menu. Temporary change of languages (audio, subtitles) may also be possible by pressing the menu key (19) during playback.

• All the changes (audio, subtitles) return to the player ’s initial settings after the disc is removed or power is switched off.

B - Using the Disc Menu (if available).

A - Using the player info display.

DISC MENU

Subtitle Language

1 English 2 Deutsch 3 Français 4 Italiano

OnENG

OffENG

OnENG

OnFRA

DTH4200-GB-BEI 4/05/00 15:44 Page 25

Page 26

For DVDs and Video CDs

1 Press PLAY (27) to start playback. 2 Press the ZOOM key (31) of the remote

control: A square will appear on the screen indicating the zoom area.

3 Select the part of the scene you want to zoom, with the

(14, 17) or (16, 18) arrows.

4 When the selection box is over the area you want to view, press ok (15) to zoom in:

• For DVDs, by pressing ok (15) repeatedly, you zoom-in x2 times / x4 times / X2 times / back to normal.

• For video CDs, by pressing ok (15) repeatedly, you zoom-in x2 times / back to normal.

5 To return to normal view again, press ZOOM key (31) once or twice depending on the

current setting.

This function also works in Pause and Slow motion modes.

Zoom

[x2] [x4]

Angle / Zoom

For DVDs

On a DVD, particular scenes of the movie may be recorded by the studio from various points of views (up to 9 camera angles), which you can select. If this option is available on the disc

appears on the TV screen and on the player ’s front display with “On-screen messages” option selected (page 32).

• Each angle number corresponds to a different view angle.

Camera angle

1 Press PLAY (27) to start playback.

2 Press the violet key (13); the angle display appears

on-screen.

3 Select a camera angle number, with the arrows

(14, 17).

4 To exit angle display, press the violet key (13).

• Press clear (25) to remove the banner without making

changes.

• If you selected the “On screen message = Off” in

the player set up menu (see p. 32), the camera icon will not appear to let you know that multiples angles are available.

1/3

2/3

DTH4200-GB-BEI 4/05/00 15:44 Page 26

Page 27

Repeat Play

Repeat play (for DVDs and Audio CDs)

Repeating sections between point A and point B.

Repeat the current track, chapter, title, a chosen section (A-B) or the whole disc .

1 Start playback with the PLAY key (27).

2 Press repeat (7) on the remote control. The

“Repeat” screen displays the current status. The Front Panel Display also indicates the status.

3 Select “Chapter”, “Title”, “Disc”, or “A-B”

using the arrows (18, 16).

4 Press ok (15) to start playback.

5 To return to normal play, press repeat (7) again, then press the arrows (18, 16) to select

“Off”, and press ok (15).

1 Start playback using PLAY key (27).

2 Press repeat (7). Select A-B on screen with the arrows. Letter “A” is displayed in yellow.

3 Press ok (15) at the point where you want the repeat play to start (point A). Letter “B” is

displayed in yellow.

4 Press ok (15) again at the point you want the repeat play to stop (point B): “A-B” is displayed

in yellow, repeat play starts.

• To define the “B” point of the (A-B) section, the player must be in Normal play mode.

Do not use “REV key (26) or FWD key (28)”, otherwise “A-B” Repeat mode will be lost.

• If the title or track is completed before marking the end B, the end of title or track

automatically becomes B.

• Repeat play only works with discs that show the elapsed time on the display.

• It may not work correctly with some discs (Video CD, with PBC, Menu “On” mode).

Repeat functions remain active until you turn

them off, open the disc tray or turn off the power.

Front Panel Use (Repeat CD's with TV Off)

For CDs, follow the steps below with the TV turned off.

• To repeat the track

that is playing, press repeat (7) twice.

• To repeat the disc

that is playing, press repeat (7) three times.

• To set an A-B repeat, press repeat four times. Press ok to set the starting point of the segment.

Let the disc play to the B point, then press ok again.

• To cancel the repeat, press clear (25).

TitleOff A - B

Chapter

DiscOff A - B

Title

DVD

DTH4200-GB-BEI 4/05/00 15:44 Page 27

Page 28

Programme Play

1 If a disc is playing, press STOP (29).

• Program playback lets you set up a specific order for

DVD / Audio CD / Video CD playback up to 20 chapters / tracks.

• Program playback is not available when you play V ideo

CD in PBC mode when Video CD Menu is “ON” mode (see p. 30).

2 Press prog / random (3) on the remote control.

3 Use the (18, 16) arrows to select “Program”.

4 Press ok (15) to confirm. The “PROGRAM” menu appears.

5 Use the (18, 16)

(14, 17) arrows to highlight

the first chapter / track to add to the program and press

ok (15). The selected chapter / track appears in the

program order box.

6 Repeat Step 3 for each chapter to add to the program.

• This function may not work correctly with some discs.

7 Press PLAY (27) to begin playing the program.

• To resume normal playback, press clear (25) and then

press PLAY (27).

• The player will automatically determine whether to do CHAPTER programming or TITLE programming.

- If there is only 1 title on the DVD disc, then it will do chapter programming.

- If there are 2 or more titles on the DVD disc:

• if all titles contain only 1 chapter each, then it will do title programming.

• if at least one title contains more than one chapter, then it will choose the first title with the largest number of chapters and do chapter programming on that title.

Programme play (for DVDs and Audio CDs)

Chap.(T: 01)

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

Program Order

–– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– –– ––

RRETURN XCLEAR ✔ OK ¨ PLAY

PROGRAM

Choose chapters by using ▲▼ Ã ¨ OK

▲▼ Ã ¨

Chap.(T: 01)

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16

Program Order

07 12 05 03

02 –– –– –– –– –– –– –– –– –– –– –– –– –– –– ––

RRETURN XCLEAR ✔ OK ¨ PLAY

PROGRAM

Choose chapters by using ▲▼ Ã ¨ OK

▲▼ Ã ¨

With DVD

Random Off ▲▼ Program Ã ¨ ✔ OK

Deleting programmed items (chapters / tracks)

1 To remove the last chapter / track that was added to the program, press clear (25). Each

subsequent press of clear (25) deletes the next chapter / track in the opposite order the chapters / tracks were programmed.

2 All programmed chapters / tracks are deleted when the disc is removed or the DVD player is

turned off.

• The only way to clear all items at once during PROGRAM MODE is to press clear (25) while in the STOP mode, or even during PLAY when there is no OSD present.

DTH4200-GB-BEI 4/05/00 15:44 Page 28

Page 29

Random Play

Random play (for DVDs and Audio CDs)

To clear Random play

Your player can play the tracks on the disc in random order.

1 If a disc is playing, press STOP (29).

2 press prog / random (3) on the remote control,

the “PROGRAM / RANDOM” menu appears.

3 Use the (14, 17) arrows to select “Random

On”.

4 Press ok (15) to confirm and start random playback.

1 If a disc is playing, press STOP (29).

2 Press prog / random (3) on the remote control, the “PROGRAM / RANDOM” menu appears.

3 Use the (14, 17) arrows to select “Random Off”.

4 Press ok (15) to confirm.

• If you play a video CD with “PBC” menu mode (p. 30), random play is not available.

Random Off ▲▼ Program Ã ¨ ✔ OK

Random On ▲▼ Program Ã ¨ ✔ OK

DTH4200-GB-BEI 4/05/00 15:44 Page 29

Page 30

Video CD special

Video CD: Using Playback Control (PBC) menu

Some video CDs (version 2.0 with playback control, “PBC” written on the disc or its case) offer scenes or information to be selected interactively via menu screen. This menu appears after the disc is loaded (or after PLAY (27) or menu key (19) is pressed).

Some video CDs (vers. 2.0) with PBC may not have a menu on-screen and may behave like a video CD vers. 1.1.

1 Press PLAY (27) to start playback.

2 Choose a menu item with the number key (24).

• Depending on the disc, the menu may extend over more than one screen. To see the other screens, use

the |ÃÃ / ¨¨| skip keys (21).

• Some discs displaying a menu at start up will automatically go in to play mode if nothing is changed on the menu after a certain period of time.

3 Press PLAY (27) to start playback.

• To return from playback to the menu, press

return (20).

4 Press STOP (29) to stop playback and remove the

menu.

• Complete stop is obtained by pressing STOP key (29) twice.

• Even after the player has finished playing a programme, the disc may continue to rotate while the menu is displayed. When no further selections are to be played, press STOP (29) to exit the menu.

• During playback, press yellow info key (10): info strip is displayed on-screen (level 1).

1 Collie 2 Terrier 3

Bobtail 4 Shepdog 5 Husky

Pedigree dogs

Video CD: Audio Channel Selection

1 Press PLAY (27) to start playback. 2 Press red key (8) in order to display the Audio

channel information on-screen.

3 Select “Stereo”, “Right” (Right channel) or “Left”

(Left channel) with the arrows (14, 17).

4 To exit Audio channel information display, press red key (8).

When playing a Video CD Vers.2.0 in menu “Off” mode or a Video CD Vers 1.1: If a track exceeds 15 minutes, when you press the |ÃÃ / ¨¨| key (21), the program moves forward / backward by 5 minutes steps.

T: 01 02:1 3:4 8

VCD

Stereo

DTH4200-GB-BEI 4/05/00 15:44 Page 30

Page 31

Display Options

If the picture should flicker when you pause a DVD, try changing the still mode settings.

1 Select “Still state”; then select a value with (18, 16)

arrows.

1a “Auto”: let the player choose the best format for still

picture: “Frame” for film or “Field” for video. However, it may sometimes be necessary to select manually to obtain the highest still picture quality.

1b “Field”: when still picture shakes (video material).

• Still field: only one field (half of the video information) is displayed on the TV screen, so the apparent resolution is low. However, there is no blurring on the screen.

1c “Frame”: for clearer picture definition (film material).

• Still frame: the two fields are displayed, alternately, on the TV screen, so the image is blurry. However, the image quality is better than field images.

From the display options menu you will access to all the special settings. Follow these intructions:

1 If a disc is playing, press STOP (29). 2 Call the “MAIN MENU” with the menu key (19). 3 Select “Display options” with key number 7 (24). 4 Move to item with (14, 17) arrows then use ok (15)

to confirm a selection or select with number key (24).

• 1 Screen Format: (4x3 PS, 4x3 LB, 16x9).

• 2 Still State: (Field, Frame, Auto

• 3 On Screen Messages: (On

/ Off).

• 4 Display Brightness: (Bright, Dim, Auto Dim

• 5 Black Level: (Light, Nor

mal).

• 6 NTSC Disc Output: (Pal 60 Hz

, NTSC).

• 7 SCART Output: (V

ideo, S-video, RGB).

Underlined options are default settings (ex: factory).

5 Select a value with (18, 16) arrows. 6 Use return key (20) to go back to previous menu.

2 - Still state

1 - Screen Format (see pages 18-19)

MAIN MENU

1 Audio English

2 Subtitles Automatic

3 Player Menu English

4 Disc Menu English

5 Rating Limit Unlocked

6 Audio Options

▼▲

7 Display Options

R RETURN ✔ OK

DISPLAY OPTIONS

1 Screen Format 4x3 LB

▼▲

2 Still State CBAuto

3 On Screen Messages On 4 Display Brightness Auto Dim 5 Black Level Normal 6 NTSC disc Output Pal 60Hz 7 SCART Output RGB

R RETURN ✔ OK

DTH4200-GB-BEI 4/05/00 15:44 Page 31

Page 32

Display Options

5 - Black level adjustment (only for video and S-video)

Films are made originally to be watched in a very dark environment (e.g.: movies theaters). When watching them at home, some scenes may be too dark for some details.

1 Select “5”: “Black level”; then select with

(18, 16) arrows:

1a “Light” : to improve the contrast.

1b “Normal”: to keep default setting (ex Factory).

4 - Front display panel brightness

According to the room and the ambiant light you may have to adjust the Display Brightness of the player.

1 Select “4”: “Display Brightness”; then select with

(18, 16) arrows:

1a “Bright” : if you want to get the player display

brightly illuminated.

1b “Dim”: to get the player display dimly illuminated.

1c “Auto Dim”: to let the player dim the display

automatically during DVD or Video CD playback.

3 - On-screen messages

You can decide whether the on-screen messages and icons appear in the left corner of the TV screen (Play, Pause, Angle icon, search speed indicators).

1 Select “3”: “On-screen messages”.

2 Make your selection, “On” or “Off” with

(18, 16) arrows.

6 - NTSC Disc Output (see page 20)

7 - SCART Output (see page 20)

DISPLAY OPTIONS 1 Screen Format 4x3 LB 2 Still State Auto

▼▲

On Screen Messages CB

4 Display Brightness Auto Dim 5 Black Level Normal 6 NTSC disc Output Pal 60Hz 7 SCART Output RGB

R RETURN ✔ OK

DISPLAY OPTIONS 1 Screen Format 4x3 LB 2 Still State Auto 3 On Screen Messages On 4 Display Brightness Auto Dim

▼▲

5 Black Level CBNormal

6 NTSC disc Output Pal 60Hz 7 SCART Output RGB

R RETURN ✔ OK

DISPLAY OPTIONS 1 Screen Format 4x3 LB 2 Still State Auto 3 On Screen Messages On

▼▲

Display Brightness CB

Auto Dim

5 Black Level Normal 6 NTSC disc Output Pal 60Hz 7 SCART Output RGB

R RETURN ✔ OK

DTH4200-GB-BEI 4/05/00 15:44 Page 32

Page 33

Audio Options

1 In “AUDIO OPTIONS” menu, select “5”, “2x

Playback Audio”.

2 Make your selection, “On” or “Off” with (18, 16)

arrows.

• No sound will be heard on discs with LPCM or DTS during 2x Playback.

AUDIO OPTIONS

1 Dolby Digital Out PCM 2 MPEG-2 Digital Out PCM 3 DTS Off 4 Dynamic Compression On

▼▲

5 2X Playback AudioCBOn

R RETURN ✔ OK

This function, designed for late-night viewing without disturbing neighbours, reduces the soundtrack’s dynamic.

This function only works with Dolby Digital DVD soundtracks.

1 In “MAIN MENU”, select “6” “Audio Options”. 2 Select “4”: “Dynamic Compression”. 3 Make your selection, “On” or “Off” with

(18, 16) arrows.

• Off: Normal audio range is selected.

• On: Select this setting to enjoy listening to the full dynamic range of the audio track even

with a low volume, when you want to listen to a movie's dialogue without having to turn the volume up (Factory setting).

4 - Dynamic Compression

5 - 2x playback Audio (for DVDs)

1 If a disc is playing, press STOP (29). 2 Call the “MAIN MENU” with the menu key (19). 3 Select “Audio Options” with key number 6 (24). 4 Move to item with

arrows (14, 17)

then use ok (15) to confirm a selection or select with number key (24).

• 1 Digital Output: PCM / Bitstream.

• 2 MPEG-2 Digital Out: PCM

/ Bitstream.

• 3 DTS: On / Of

• 4 Dynamic Compression: On

/ Off.

• 5 2X Playback Audio: On

/ Off.

Underlined options are default settings (ex: factory).

5 Select a value with (18, 16) arrows. 6 Use return key (20) to go back to previous menu.

MAIN MENU

1 Audio English

2 Subtitles Automatic

3 Player Menu English

4 Disc Menu English

5 Rating Limit Unlocked

▼▲

6 Audio Options

7 Display Options

R RETURN ✔ OK

1 - Dolby Digital Out (see page 15)

2 - MPEG-2 Digital Out (see page 15)

3 - DTS (see page 15)

AUDIO OPTIONS

1 Dolby Digital Out PCM 2 MPEG-2 Digital Out PCM 3 DTS Off

▼▲4Dynamic Compression CBOn

5 2X Playback Audio On

R RETURN ✔ OK

DTH4200-GB-BEI 4/05/00 15:44 Page 33

Page 34

Rating limit

Rating (for DVDs)Rating (for DVDs)

This feature allows you to control the type of discs or programmes your family can watch. If some discs contain information, or scenes which exceed the rating limit you have set, they will not be played. There are up to 8 Rating levels. This function only works with DVDs that have been assigned a rating limit by the publisher and, therefore, it is disc-dependent.

1 If a disc is playing, press STOP (29).

2 Call the “MAIN MENU”, with the menu key (19) .

3 Select “Rating Limit”; press key number 5 (24). The

parental screen appears.

4 Use arrows to select “Yes” if you want to use a

password to lock the player. The “CREATE PASSWORD” screen appears.

5 Choose a personal 4-digit password and enter it with

number keys. The “Re-enter Password” screen appears to confirm the password. Enter your password again. The “Rating limit” screen appears.

Rating Level selection

6 To select the “Rating Level”,press key number 2. The

“SET RATING LIMIT” screen appears.

7 Set the Rating Limit you want with the arrows

(14, 17) and confirm with ok (15) to permit or prohibit playback of unsuitable scenes or adult programmes.

• Level “8” allows all titles to be played whereas level “1”

will be the most restrictive for children, for example. ex: if you select level “5”, any disc containing a higher level than your setting will not play unless the correct password is entered.

• The closed padlock icon shows that the setting is now

locked.

8 To exit MAIN MENU, press return key (20) twice.

MAIN MENU

1 Audio English

2 Subtitles Automatic

3 Player Menu English

4 Disc Menu English

▼▲

5 Rating Limit Unlocked

6 Audio Options 7 Display Options

R RETURN ✔ OK

CREATE PASSWORD

Enter Password

– – – –

R RETURN Press 0-9

SET RATING LIMIT

8 Adult Content Password 7

Required 6 5 4 3 2 Free Access

▼▲

1 Child Content

R RETURN ✔ OK

RATING LIMIT

▼▲

Use Password Ã¨ No

R RETURN ✔ OK

RATING LIMIT

▼▲ 1 - Use Password Ã¨ Yes

2 - Set rating limit 6 3 - Change Password

R RETURN ✔ OK

DTH4200-GB-BEI 4/05/00 15:44 Page 34

Page 35

Rating limit

CHANGE PASSWORD

Enter New Password

– – – –

R RETURN Press [0-9]

PASSWORD CHECK

Enter Password

– – – –

R RETURN Press [0-9]

Overriding the Rating

For DVDs

If you have previously set a rating limit, playing some discs may display this screen:

1 Choose “Override” with the (14, 17) arrows and

press ok (15) to confirm.

2 Enter your 4-digit password and press ok (15) to confirm.

• Not all DVD discs include rating information that make the rating system work, though the printings on their case may say that they are “for adults only”. Consequently disc without information will be played even if the player is locked with a code.

• If you have forgotten your password, please check in the T

rouble shooting guide at the end of this manual

( page 41).

Your selection exceeds the rating limitfor this player. Override the limit?

▼▲

1 Override

2 Cancel

✔ OK

Player unlock and Rating Level cancellation

1 If a disc is playing, press STOP (29). 2 Call the “MAIN MENU”, with the menu key (19) . 3 Select “Rating Limit”; press key number 5 (24).

The “PASSWORD CHECK” screen appears.

4 Enter your 4-digit password.

The “RATING LIMIT” screen appears.

5 Use arrows (18, 16) and select “No” in the menu “Use

password” (line # 1).

6 To exit “MAIN MENU”, press return key (20) twice.

Password change

1 Proceed with step 1 to 4 as described above. 2 Press key number 3 (24). The “Change Password”

screen appears.

3 Enter your new 4-digit password. Confirm by re-entering

your new 4-digit password again.

4 To exit “MAIN MENU”, press return key (20) twice.

RATING LIMIT

▼▲ 1 - Use Password Ã¨ Yes

2 - Set Rating Limit 1 3 - Change password

R RETURN ✔ OK

DTH4200-GB-BEI 4/05/00 15:44 Page 35

Page 36

Universal remote control

Universal remote control setting

You have the option to set your remote control to control your TV set and/or video recorder. This enables you to control your video devices with a single remote control.

2 Look for the 3-digit code of your device's brand in the table

of brands on the next page (Highlight it with a pencil, for example).

3 Hold the menu key (19) down and key in the 3-digit code

corresponding to the make of your TV set. Depending on your TV set model, it may be necessary to try several of the proposed codes.

4 Release the menu key (19).

• Try to operate the device by switching it on / off with the

key.

• If it does not work, repeat from step 2 with another 3-digit code.

DVD

TV set

Video recorder

1 Place the switch dvd • vcr • tv on the device you want to

control.

• Not all TV, VCR can be operated with this universal remote control.

• Try out which functions you can control with the remote control.

• Try to find the most efficient code for your brand (for brands with several codes).

•

If you have replaced the batteries of the remote control, perform the remote control set-up again.

DTH4200-GB-BEI 4/05/00 15:44 Page 36

Page 37

Universal remote control

To control other devices

This remote control allows you to control your TV and video recorder. Make sure you set the remote control for the device you want to control. To control TV Sound whatever the switch position ( dvd, vcr, tv).

• Press on menu

(19)

, then enter 999 to control tv sound.

Video controlTV control

• While in “tv” ” position, the transmission mode ofPLAY, STOP, REV, FWD, REC, and PAUSE depends on the previously selected mode: “dvd” or “vcr”. I. e. if switched over from “vcr” to “tv”, the keys will control the video.

Even if the switch is in TV position, the keys control the DVD player.

Other keys offer different functions according to your devices.

To start playback or recording.

To stop the recording. (VCR only)

For rewinding or fastforwarding (after STOP) and visual search (while playing) in both directions.

To stop.

For a still.

To select the AV input.

To switch your set on and off (stand-by).

Menu controls or special functions.

To select programmes.

TV Mute (sound off)

TV Sound level.

DTH4200-GB-BEI 4/05/00 15:44 Page 37

Page 38

Universal remote control

Brand codes information

List of TV brands

List of Video Recorder brands

modification.

If you do not find the brand of your video

recorder or TV, you may succeed with

codes from other brands.

Code

Akai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .008, 020

Akari . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .028

Bang & Olufsen . . . . . . . . . . . . . . . . . . . . . . . . .009, 019

Blaupunkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .023

Bluesky . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020

Brandt . . . . . . . . . . . . . . . . . . . . . . . .000, 001, 010, 020

Brionvega . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019

CGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .016

Continental Edison . . . . . . . . . . . . . . . . . . . . . . . . . .004

Daewoo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020, 025

Elbe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005, 015, 023

Ferguson . . . . . . . . . . . . . . . . . . .000, 001, 003, 004, 010

Finlux . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019, 020, 024

Fisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .008

Formenti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019

Goldstar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020

Grundig . . . . . . . . . . . . . . . . . . . . . . . . . . .016, 023, 024

Hitachi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .007

Imperial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .016

JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .013

Kneissel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020, 025

Loewe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020

Loewe opta . . . . . . . . . . . . . . . . . . . . . . . . . . . .019, 020

Luxor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005

Metz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .013, 019, 023

Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . .017, 018, 020

Mivar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .016

Nokia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005

Nordmende . . . . . . . . . . . . . . . . . . . . .000, 001, 010, 020

Orion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005, 020

Panasonic/National . . . . . . . . . . . . . . . . . . .

005, 012, 026

Philips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019-021

Phonola . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019-021

Pioneer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .001, 005

Polytron . . . . . . . . . . . . . . . . . . . . . . . . . . .020, 027, 029

Radiola . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019-021

Radiomarelli . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019

Rex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005

Saba . . . . . . . . . . . . . . . . . .000, 001, 005, 010, 019, 020

Salora . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005

Samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020, 030

Sanyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .008, 018

Schaub-Lorenz . . . . . . . . . . . . . . . . . . . . . .005, 016, 020

Schneider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019-021

Seleco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .005

Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .018, 022

Siemens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .023

Singer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .001, 002, 019

Sinudyne . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019

Sonitron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .008

Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .014, 018

Teleavia . . . . . . . . . . . . . . . . . . . . . . . . . . .001, 010, 020

Telefunken . . . . . . . . . . . . . . . . .000, 001, 002, 010, 020

Thomson . . . . . . . . . . . . . . . . . . .000, 001, 002, 010, 020

Toshiba . . . . . . . . . . . . . . . . . . . . . . . .006, 016, 018, 024

Wega . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .019

Yokan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020, 025

Yoko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .020

Code

Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167, 168

Akai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103-107

Blaupunkt . . . . . . . . . . . . . . . . . . . . . . . . . 108, 109, 162

Brandt . . . . . . . . . . . . . . . . . . . . . . . . 101, 102, 112, 156

Daewoo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140-147

Ferguson . . . . . . . . . . . 101, 102, 112, 153, 155-157, 160

Fisher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135-137

Funai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Goldstar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123, 134

Grundig . . . . . . . . . . . . . . . . . . . . . . . . . . . 161, 169, 170

Hitachi . . . . . . . . . . . . . . . . . . . . . . . . 110, 112, 122, 123

JVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106, 110-113

Mitsubishi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148, 149

NEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

Nokia . . . . . . . . . . . . . . . . . . . . . . . . . 103, 110, 135, 138

Nordmende . . . . . . . . . . . . . . . . . 101, 102, 112, 154-158

Orion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124-129

Panasonic . . . . . . . . . . . . . . . . . . . . . . . . . 108, 109, 162

Philips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161-166

Radiola . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161-166

Saba . . . . . . . . . . . . . . . . . . 101, 102, 112, 153, 155-158

Samsung . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

Sanyo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119-121

Schneider . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161-166

Sharp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131, 132

Sony . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115-118

Teleavia . . . . . . . . . . . . . . . . . . . 101, 112, 155, 156, 102

Telefunken . . . . . . . . . . . . . 101, 102, 112, 155, 156-159

Thomson . . . . . . . . . . . . . . . 101, 102, 112, 154, 156-158

Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . 110, 111, 114

DTH4200-GB-BEI 4/05/00 15:44 Page 38

Page 39

Appendix: troubleshooting

Symptom PageRemedy

Before requesting service (troubleshooting)

No power? Power is switched off

automatically?

The keys do not activate the functions they control (player and / or remote control).

Cannot copy DVD discs to video tape?

There is no picture?

The picture is distorted or shakes during search, forward or reverse?

The picture shakes when still.

There is no sound or it can hardly be heard?

No 3D-Virtual “Surround” sound?

5.1 channel sound is not being reproduced.

No audio.

Noise interference appears on the TV, while watching a TV programme and the DVD player is left on?

21-39

5-12-13

14-15

15-24

15-33

Power

• Correctly connect the AC Power Cord to an AC Outlet.

• If the player is not used, i.e. no key pressed for 30 minutes, it automatially switches to standby (Auto Power Off). Press the

STANDBY key to switch the player on again.

• Wipe the disc clean.

• Set the STANDBY key to OFF and back to ON again. Alternatively, turn off the power, disconnect the power plug and then re-connect it (The player may not be operating properly due to lightning, static electricity or some other external factor).

• If keys still do not activate the functions they control even when the above mentioned corrective action has been taken, contact your THOMSON retailer.

•This player is equipped with anticopy protection.

Video and Audio

• Turn on the TV set.

• Check connections.

• Make the correct input selection on the TV set.

• Search, forward or reverse playback may generate a slight distortion, but this is not a malfunction.

• Select “FIELD” or “FRAME” in “Still state” selection.

• Check connections.

• Make the correct audio input selection and volume adjustment on the TV set or hifi system (amplifier or AV selector).

• There is no sound during a pause (still picture), still picture advance, or slow playback.

• Check the Audio Options in the Setup menu.

• 3D-surround does not operate with DTS Sound tracks of DVD discs & Audio CDs and with LPCM sound tracks of DVD discs.

• 5.1 channel sound is reproduced only when the following conditions are met. :

1) The DVD player is connected with the proper amplifier

2) The disc has been recorded with 5.1 channel sound.

• Check whether the disc being played has the “Dolby 5.1 ch” mark on the outside.

• Check if your audio system is connected and working properly.

• Make sure you have selected the correct “Dolby Digital Out” in the “Audio Options” Menu.

• Turn off DVD player.

DTH4200-GB-BEI 4/05/00 15:44 Page 39

Page 40

Appendix: troubleshooting

Symptom PageRemedy

The remote control does not work?

The “ ” icon appears on-screen?

TV or video recorder cannot be operated with the remote control.

Playback does not start when the PLAY key is pressed?

Playback stops immediately after the PLA Ykey is pressed?

A screen informs you that the disc cannot be played.

A screen asks you if you want to override the player’s rating level or make another programme selection.

Search forward & reverse playback does not work?

The Video CD cannot display a menu?

No picture or the picture shown is not that of the DVD player.

7 7

36-38

8-21

1 1

34-35

Remote Control

• Load the batteries and check that their polarities (+ and –) are correctly aligned.

• Batteries are low. Replace with new ones.

• Remove batteries and hold down one or more keys for several minutes to drain the microprocessor inside the remote to reset it. Reinstall batteries and try remote again.

• Point the remote control to the front of the player.

• Operate the remote control within an 8 m range from the player.

• Remove any obstacles between the remote control and the red LED on the player.

• When “ ” appears on-screen, it indicates that you have pressed the wrong key, because:

1. The DVD does not allow it.

2. The DVD does not propose this option /e.g., angles.

3. The function is not available on that part of the disc.

4. You have requested a title or chapter number or search time that is not available.

• Not all models can be operated with the supplied universal remote control. Try with other brands' codes.

Playback

• Make sure that the disc (single sided) is loaded correctly with the title label facing up.

• This player can play DVDs, Video CDs and Audio CDs only, check that your disc corresponds to one of these formats.

• If the disc is dirty, wipe it with a soft and clean cloth.

• Condensation occurred inside the player. Leave it at room temperature for 1 to 2 hours.

• The disc’s region No. differs from your player ’s region No.

• The initial rating setting in the set-up menu prohibits playing this DVD. Restriction level was defined in the player.

• Some DVDs have segments where search forward & reverse playback functions do not work.

• Only a Video CD with playback control (PBC) can display a menu.

• Switch off the other video device connected to the AV2 jack of the DVD player.

• Make sure that the input setting for the TV is in audio / video (AV) position, e. g. AV 1, AV 2.

• Check the SCART output selection for AV 1 (video / s-video / RGB).

DTH4200-GB-BEI 4/05/00 15:44 Page 40

Page 41

Appendix: troubleshooting

Before requesting service (troubleshooting)

Symptom PageRemedy

There are no substitles?

Subtitle (or language) setting cannot be changed?

You have forgotten your password to change the rating level?

The picture is not displayed in the correct format on the TV (4 x 3 or 16 x 9)

The screen Ratio cannot be changed

No message on the screen?

The camera angle cannot be changed with the angle “ ” key?

The menu language is not the one you want?

Audio (spoken) and / or subtitle language is not the one selected during the initial player set-up?

34-35

5-16-17

18-19

5-17

24-25

Subtitle ( ), language ( ), camera angle ( ), etc.

Disc menu operation and contents may differ from disc to disc. Please refer to the instructions accompanying the disc.

• Check that the subtitle is recorded on the disc.

• Subtitles disappear from the TV screen. See how to display subtitles.

• The disc being played has been recorded in only one language.

• Depending on the type of DVD, some segments limit language selection.

• While in stop mode hold down STOP and PLAY keys of the player, in that order and simultaneously, for more than 3 seconds. The password lock will be released and all initial settings will return to the default values. Please note, that in this case you should switch the player OFF and then back ON again. You will see a choice of menu language to be re-set. After pressing the corresponding numeric key on the remote control, you will need to proceed with the other initial settings, as you did when you first installed the player. (set-up menu).

• According to your TV, make the correct “Screen format” setting in the set-up menu.

• The screen Ratio may be fixed on your DVD disc.

• Do not use zoom function on your TV, as parts of the picture and menu may be lost.

• The setting of “On-Screen messages” is set to “Off”. Set it to “On” in the “DISPLAY OPTIONS” menu.

• This function does not work when a DVD has not been recorded with a multi-camera angle system. Some DVDs use a multi-camera angle system only in certain portions of the DVD.

• The menu language for your player has not been set during set-up.

• Your preferred menu language on a DVD disc (if available) has not been set during set up.

• The menu is not available in your language on the DVD disc.

• If the audio or subtitle language is not available on the DVD disc, the language selected during initial player set-up will not be heard or seen. The disc’s priority language (default language) is selected automatically. If you want another language, press audio “ ” key and subtitle “ ” key to select it temporarily for this disc (Or press

menu during playback, if the disc has its own language selection

menu).

DTH4200-GB-BEI 4/05/00 15:44 Page 41

Page 42

Appendix: index

Index

4 x 3 preference . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

4 x 3 / 16 x 9 TV screen . . . . . . . . . . . . . . . . . . . . . .18

A-B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

About discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . .02-01

Access to a scene . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Audio connections . . . . . . . . . . . . . . . . . . . . . . . .12-14

Audio for DVD 2x playback . . . . . . . . . . . . . . . . . . .33

Audio language . . . . . . . . . . . . . . . . . . . . . . .24-25-5-9

Auto power off . . . . . . . . . . . . . . . . . . . . . . . . . . .21-39

Basic connections . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Black Level adjustment . . . . . . . . . . . . . . . . . . . . . . .32

Camera angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Changing rating items . . . . . . . . . . . . . . . . . . . . .34-35

Chapter / track skip . . . . . . . . . . . . . . . . . . . . . . . . . .22

Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Digital audio output . . . . . . . . . . . . . . . . . . . . . . . . . .15

Disc View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Discs you can play . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Display brightness . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Dolby Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

DTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Dynamic compression . . . . . . . . . . . . . . . . . . . . . . . .33

DVD copy protection . . . . . . . . . . . . . . . . . . . . . . . .13

DVD remote control . . . . . . . . . . . . . . . . . . . . . . . . .6-7

Fit the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

For your disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Front and display . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Initial set-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Introscan / Index View: Audio CD/video CD . . . . . . .22

Regional codes information . . . . . . . . . . . . . . . . . . . . .2

Main menu language . . . . . . . . . . . . . . . . . . . . . . .8-16

Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

MP3 Audio files . . . . . . . . . . . . . . . . . . . . . . . . . . .11-2

Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

MPEG 2 audio . . . . . . . . . . . . . . . . . . . . . . . . . . .11-24

On-screen messages . . . . . . . . . . . . . . . . . . . . . . . . .32

Overriding the rating . . . . . . . . . . . . . . . . . . . . . . . . .35

Package content . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Picture / track scan . . . . . . . . . . . . . . . . . . . . . . . . . .22

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Programme play . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Rating Level Selection . . . . . . . . . . . . . . . . . . . . . . .34

Remote control setting . . . . . . . . . . . . . . . . . . . . . . . .36

Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Resume memory . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

SCART output . . . . . . . . . . . . . . . . . . . . . . . . . . .12- 20

Set a rating limit . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Set-up menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Slow motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Special controls for other appliances . . . . . . . . . .36-37

Still state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Stills and frame advance . . . . . . . . . . . . . . . . . . . . . .21

Subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Subtitles on / off . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

3-D Surround sound (Spatializer) . . . . . . . . . . . . . . .24

Titles, chapters, tracks, or elapsed time . . . . . . . . . . .23

TV and video control . . . . . . . . . . . . . . . . . . . . . . . . .37

Universal remote control . . . . . . . . . . . . . . . . . . . . . .36

Using playback control menu (PBC) Video CD ver 2.0

. . .30

Video connections . . . . . . . . . . . . . . . . . . . . . . . .12-13

Virtual Surround Sound (3-D Surround - Spatializer)

. . . . .24

Why a disc cannot be played . . . . . . . . . . . . . . . . . . . .2

Your preferred language on discs . . . . . . . . . . . . . .5-17

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

DTH4200-GB-BEI 4/05/00 15:44 Page 42

Page 43

Appendix

Technical data

Power requirements: Power consumption:

Weight: Dimensions: Operating temperature range: Operating humidity range: Disc formats:

TV set system:

Audio signal output characteristics:

Pickup:

AC 110V - 240 V ±10 %, 50 Hz/60 Hz 18W (approx. 2,5 W when power is OFF)

3,3 kg 430 x 89 x 280 mm (excluding protrusions) + 5 to + 35° C 10 to 75% (no condensation) (1) DVD-Video disc: PAL and NTSC

12/8 cm single-sided, single-layer 12/8 cm single-sided, double-layer 12/8 cm double-sided, single-layer

12/8 cm double-sided, double-layer (2) Compact disc Audio 12/8 cm disc (3) Video CD: PAL and NTSC 12/8 cm disc (4) S-Video CD (5) most CD-Rs and CD-RWs

PAL 50 - 60 Hz (PAL625/50, PAL 525/60), NTSC or PAL 60 Hz capable TV set is required to play back NTSC discs.

1) Frequency response:

DVD linear audio 48 kHz sampling: 4 Hz to 22 kHz (EIAJ)

DVD linear audio 96 kHz sampling: 4 Hz to 44 kHz (EIAJ)

CD Audio: 4 Hz to 20 kHz (EIAJ) (2) S/N ratio: 105 dB (EIAJ) (3) Dynamic range: DVD linear audio: 100 dB (EIAJ)

CD audio: 100 dB (EIAJ) (4) Wow and flutter: below measurable limits (5) Total harmonic distortion: less than 0.005%

Wave length: 655 nm, Laser power: CLASS 2 2 Laser diodes

• THOMSON Multimedia reserves the right to change the specifications without notice.

• Weight and dimensions are approximate.

Nominal Specification.

Dear customer,

Please remember, that when this product will reach the end of its service life, you will be responsible for the special treatment it will be subjected to.

* *

The fused plug (for UK USERS only)

A fused plug must be fitted with a 3A fuse approved by ASTA or BSI to BS 1362 and fuse covers must always be securely remounted. If your set does not work, the fuse may be blown.

The BBkey (power stand-by) on the remote control does not completely disconnect the player from the mains supply, but

switches operating power on and off.

Conception : Marc Rensonnet - Réalisation Vincent Morell - Nicolas Morvan - Sabine Arbogast

DVD - SEC / DTH 4200 / GB - BK / RST - BEI / 05 - 2000

DTH4200-GB-BEI 4/05/00 15:44 Page 43

THOMSON DTH4200 - annexe 1 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual