Thermador VTN600CV2C, VTN600F, VTN1000F Design Guide
132
MODEL HMWB36FS SHOWN WITH 36-INCH GAS COOKTOP SGSX365FS
VENTILATION
PROFESSIONAL & MASTERPIECE® SERIES
VENTILATION
No need to worry about lingering odors or smoke with our
elegant, powerful ventilation systems, featuring design accents
that complement our Professional Series or our Masterpiece®
Collection. These sophisticated ventilation systems remove
smoke, grease and unhealthy airborne contaminants. From
standard wall to specialty hoods, downdrafts, island and custom
inserts, each model has one thing in common: legendary
Thermador performance. These powerful, quiet systems
tackle unwanted smoke, grease, heat and odors—quietly and
efficiently—with ventilation power ranging from 400
to 1,300 CFM.
1.800.735.4328 | THERMADOR.COM
133
VENTILATION RANGE, RANGETOp AND VENTILATION MATRIX
pROFESSIONAL SERIES
= PErFECT FIT
= VIABLE oPTIoN
27-INCH DEPTH
WALL HooDs
24-INCH DEPTH
WALL HooDs
30" PH30Cs
36" PH36Cs
42" PH42Cs
48" PH48Cs
54" PH54Cs
30" HPWB30Fs
36" HPWB36Fs
48" HPWB48Fs*
42" HNI42Ys
30-INCH
Pro GrAND
36-INCH
Pro GrAND
48-INCH
Pro GrAND
30-INCH
Pro HArmoNY
24-INCH DEPTH27-INCH DEPTH
134
48" HNI48Ys
IsLAND HooDs
54" HNI54Ys
30" VCI230Ds
36" VCI236Ds
CusTom INsErTs
48" VCI248Ds
The width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador blowers.
*High heat tested to accommodate Pro Harmony™ or Pro Rangetop 18,000 burners and grill.
VENTILATION RANGE, RANGETOp AND VENTILATION MATRIX
pROFESSIONAL SERIES
VENTILATION
36-INCH
PRO HARMONY
24-INCH DEPTH 24-INCH DEPTH
48-INCH
PRO HARMONY
30-INCH
RANGETOP
36-INCH
RANGETOP
48-INCH
RANGETOP
1.800.735.4328 | THERMADOR.COM
135
VENTILATION COOKTOP AND VENTILATION MATRIX
MASTERPIECE® SERIES
= PErFECT FIT
= VIABLE OPTION
WALL HOODS WITH BLOWEr
WALL HOODS
CHIMNEY HOODS WITH BLOWEr
CHIMNEY HOODS
30" HMWB30FS
36" HMWB36FS
30" HMWN30FS
36" HMWN36FS
48" HMWN48FS
36" HMCB36FS
42" HMCB42FS
36" HMCN36FS
42" HMCN42FS
30-INCH
INDuCTION
36-INCH
INDuCTION
30-INCH
GAS COOKTOP
36-INCH
GAS COOKTOP
36" HDDW36FS
DrAWEr HOOD
36" HGEW36FS
GLASS CANOPY HOOD
30" uCVM
DOWNDrAFT
36" uCVM
21" VCI21CS
CuSTOM INSErTS
29" VCI29CS
42" HGSI42TS
ISLAND HOOD
The width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador blowers.
136
VENTILATION COOKTOP AND VENTILATION MATRIX
MASTERPIECE® SERIES
VENTILATION
30-INCH
ELECTrIC COOKTOP
30-INCH
SENSOr ELECTrIC COOKTOP
36-INCH
ELECTrIC COOKTOP
36-INCH
SENSOr ELECTrIC COOKTOP
1.800.735.4328 | THERMADOR.COM
137
VENTILATION BLOWER SELECTION AND DUCT GUIDE
PROFESSIONAL SERIES
Type
138
Available
Type Model No. Sizes (Widths)
30",Ê36",Ê42",Ê
48",Ê54"
30"
36",Ê48"
42",Ê48",Ê54"
30",Ê36",Ê48"Ê
WALL
HOODS
ISLAND
HOODS
CUSTOMÊ
INSERTS
PH_CS
HPWB_FS
HNI_YS
VC12_DS
CFM
Blower Information
Ê 600Ê ÊÊ Ê •Ê VTN630CÊ 4.8
Ê 1000Ê ÊÊ Ê •Ê VTN1030CÊ 5.0
Ê 600Ê •Ê Ê Ê VTR630DÊ 4.3
Ê 1000Ê •Ê Ê Ê VTR1030DÊ 7.8
Ê 1300Ê •Ê Ê Ê VTR1330EÊ 9.2
Ê 600Ê ÊÊ •Ê Ê VTI610DÊ 5.8
Ê 1000Ê ÊÊ •Ê Ê VTI1010DÊ 7.6
Ê 600Ê ÊÊ Ê •Ê IncludedÊ 3.4
Ê 1200Ê ÊÊ Ê •Ê IncludedÊ 10.2
Ê 1000Ê Ê•Ê Ê Ê VTR1030DÊ 7.8
Ê 1300Ê Ê•Ê Ê Ê VTR1330EÊ 9.2
Ê 600Ê ÊÊ •Ê Ê VTI610DÊ 5.8
Ê 1000Ê ÊÊ •Ê Ê VTI1010DÊ 7.6
Ê 600Ê ÊÊ Ê •Ê VTI610DÊ 5.8
Ê 600Ê •Ê Ê Ê VTR630DÊ 5.2
Ê 1000Ê •ÊÊ Ê Ê VTR1030DÊ 7.8
Ê 1300Ê •ÊÊ Ê Ê VTR1330EÊ 9.5
Ê 600Ê ÊÊ •Ê Ê VTI610DÊ 5.8
Ê 1000Ê ÊÊ •Ê Ê VTI1010DÊ 7.6
MASTERPIECE® SERIES
Ê 600Ê ÊÊ Ê •Ê VTN600FÊ 4.6
Ê 600Ê •ÊÊ Ê Ê VTR630DÊ 4.3
30"
WALL
HOODS
CHIMNEY
HOODS
ISLANDÊHOODS
CUSTOMÊINSERTS
DOWNDRAFT
*Purchase separately at most hardware stores, unless otherwise indicated with a Thermador model number.
HMWN_FS
HMWB_FS
HMCN_FS
HMCB_FS
HGEW36FS
HDDW36FS
HGSI42TS
VCI_CS
UCVM_FS
36",Ê48"
30", 36"
36",Ê42"
36",Ê42"
36"
36"
42"
21",Ê29"
30", 36"
Ê 1000Ê •Ê Ê Ê VTR1030DÊ 7.8
Ê 600Ê ÊÊ •Ê Ê VTI610DÊ 5.8
Ê 1000Ê ÊÊ •Ê Ê VTI1010DÊ 7.6
Ê 600Ê ÊÊ Ê •Ê VTN600FÊ 4.6
Ê 1200Ê ÊÊ Ê •Ê VTN1000FÊ 8.8
Ê 600Ê •ÊÊ Ê Ê VTR630DÊ 4.3
Ê 1000Ê •ÊÊ Ê Ê VTR1030DÊ 7.8
Ê 1300Ê •ÊÊ Ê Ê VTR1330EÊ 9.2
Ê 600Ê ÊÊ •Ê Ê VTI610DÊ 5.8
Ê 1000Ê ÊÊ •Ê Ê VTI1010DÊ 7.6
Ê 600Ê ÊÊ Ê •Ê IncludedÊ 3.4
Ê 1000Ê ÊÊ Ê •Ê VTN1080FÊ 5.0
Ê 600Ê Ê•Ê Ê Ê VTR630DÊ 6.7
Ê 1000Ê Ê•Ê Ê Ê VTR1030DÊ 7.8
Ê 1300Ê •ÊÊ Ê Ê VTR1330EÊ 9.2
Ê 600Ê ÊÊ •Ê Ê VTI610DÊ 5.8
Ê 1000Ê ÊÊ •Ê Ê VTI1010DÊ 7.6
•Ê 600Ê ÊÊ Ê •Ê IncludedÊ 4.9
Ê 600Ê ÊÊ Ê •Ê IncludedÊ 4.9
Ê 600Ê ÊÊ Ê •Ê IncludedÊ 4.9
Ê 400Ê ÊÊ Ê •Ê IncludedÊ 3.0
Ê 400Ê ÊÊ Ê •Ê IncludedÊ 4.4
Ê 600Ê ÊÊ Ê •Ê VTN600CV2CÊ 6.7
Ê 600Ê Ê•Ê Ê Ê VTR630DÊ 6.7
Ê 1000Ê Ê•Ê Ê Ê VTR1030DÊ 10.2
Ê 600Ê ÊÊ •Ê Ê VTI610DÊ 5.8
Ê 1000Ê ÊÊ •ÊÊ Ê VTI1010DÊ 7.6
emote
R
Inline
Integral
Model No.
Total Amps @ 120 Volts, 60 Hz
VENTILATION BLOWER SELECTION AND DUCT GUIDE
VENTILATION
Roof plate
Required
Duct Size at Blower Transition
with Backdraft
Duct Size
at Discharge
Discharge
Direction
Damper
FPLT1000
RFPLT600
ÊÊ ÊÊ Ê Ê •Ê •ÊÊ Ê Ê Ê Ê•Ê •Ê •Ê
ÊÊ ÊÊ Ê Ê •Ê •Ê Ê Ê Ê Ê•Ê •Ê •Ê
Ê •Ê Ê •Ê Ê Ê •Ê Ê Ê Ê Ê•Ê •Ê •Ê Ê
ÊÊ •Ê Ê Ê •Ê •Ê Ê Ê Ê Ê•Ê •Ê •Ê
ÊÊ •Ê Ê Ê •Ê •Ê Ê Ê Ê Ê•Ê •Ê •Ê
ÊÊ ÊÊ •ÊÊ Ê Ê •Ê Ê Ê Ê Ê•Ê •Ê •Ê
ÊÊ ÊÊ Ê Ê •Ê •Ê Ê Ê Ê Ê•Ê •Ê •Ê
ÊÊ ÊÊ Ê Ê •Ê •Ê Ê Ê Ê Ê•Ê •Ê Ê Ê •
ÊÊ ÊÊ Ê Ê •Ê •ÊÊ Ê Ê Ê •ÊÊ •Ê Ê
ÊÊ •Ê ÊÊ Ê •Ê •Ê Ê Ê •Ê ÊÊ •Ê Ê
ÊÊ •Ê Ê Ê •Ê •ÊÊ Ê Ê •Ê ÊÊ •Ê Ê
ÊÊ ÊÊ •Ê Ê Ê •Ê Ê Ê •Ê ÊÊ •Ê Ê
ÊÊ ÊÊ Ê Ê •Ê •ÊÊ Ê Ê •Ê ÊÊ •Ê Ê
ÊÊ ÊÊ •ÊÊ Ê Ê •ÊÊ Ê Ê Ê Ê•Ê •Ê Ê
Ê •Ê Ê •ÊÊ Ê Ê ÊÊ •Ê Ê Ê Ê•Ê •Ê Ê
ÊÊ •Ê ÊÊ Ê •Ê ÊÊ •Ê Ê Ê Ê•Ê •Ê Ê
ÊÊ •Ê ÊÊ Ê •Ê ÊÊ •Ê Ê Ê Ê•Ê •Ê Ê
ÊÊ ÊÊ •ÊÊ Ê Ê ÊÊ •Ê Ê Ê Ê•Ê •Ê Ê Ê
ÊÊ ÊÊ ÊÊ Ê •Ê ÊÊ •Ê Ê Ê •ÊÊ •Ê Ê Ê
R
6-Inch
8-Inch
10-Inch
Hood Information
Included
equired*
R
6-Inch
8-Inch
10-Inch
Vertical
Horizontal
Side and Down
Non-Ducted Capability
ÊÊ Ê ÊÊ ÊÊ Ê •Ê Ê Ê Ê Ê•Ê •Ê Ê Ê •
Ê •Ê Ê ÊÊ •Ê Ê •Ê Ê Ê Ê Ê•Ê •Ê Ê
ÊÊ •Ê Ê ÊÊ Ê •Ê Ê Ê Ê Ê•Ê •Ê Ê
ÊÊ Ê ÊÊ •Ê Ê •Ê ÊÊ Ê Ê Ê•Ê •Ê Ê
ÊÊ Ê ÊÊ ÊÊ Ê •Ê ÊÊ Ê Ê Ê•Ê •Ê Ê
ÊÊ Ê ÊÊ ÊÊ Ê •Ê ÊÊ Ê Ê Ê•Ê •Ê Ê Ê
ÊÊ Ê ÊÊ ÊÊ Ê •Ê ÊÊ Ê Ê Ê•Ê •Ê Ê
Ê •Ê Ê ÊÊ •ÊÊ Ê •Ê ÊÊ Ê Ê Ê•Ê •Ê Ê
ÊÊ •Ê Ê ÊÊ Ê •Ê ÊÊ Ê Ê Ê•Ê •Ê Ê
ÊÊ •Ê Ê ÊÊ Ê •Ê ÊÊ Ê Ê Ê•Ê •Ê Ê
ÊÊ Ê ÊÊ •ÊÊ Ê •Ê ÊÊ Ê Ê Ê•Ê •Ê Ê
ÊÊ Ê ÊÊ ÊÊ Ê •Ê ÊÊ Ê Ê Ê•Ê •Ê Ê Ê
ÊÊ Ê ÊÊ ÊÊ Ê •Ê ÊÊ Ê Ê •Ê •ÊÊ Ê Ê •
ÊÊ Ê ÊÊ ÊÊ •Ê Ê •ÊÊ ÊÊ •Ê ÊÊ •Ê Ê
Ê •Ê Ê ÊÊ •ÊÊ Ê Ê •Ê ÊÊ •Ê ÊÊ •Ê Ê
ÊÊ •Ê •Ê ÊÊ Ê Ê •Ê Ê •Ê ÊÊ •Ê Ê
ÊÊ •Ê •Ê ÊÊ Ê Ê •ÊÊ Ê •Ê ÊÊ •Ê Ê
ÊÊ Ê ÊÊ •ÊÊ Ê Ê •ÊÊ Ê •Ê ÊÊ •Ê Ê
ÊÊ Ê ÊÊ ÊÊ Ê Ê •Ê Ê •Ê ÊÊ •Ê Ê
ÊÊ•Ê Ê ÊÊ •Ê Ê •Ê ÊÊ •Ê Ê ÊÊ •Ê Ê
ÊÊ Ê ÊÊ •Ê Ê •Ê ÊÊ •Ê Ê ÊÊ •Ê Ê
ÊÊ Ê ÊÊ •Ê Ê •Ê ÊÊ •Ê Ê ÊÊ •Ê Ê
ÊÊ Ê ÊÊ •Ê Ê •Ê ÊÊ •Ê Ê ÊÊ •Ê Ê
ÊÊ Ê ÊÊ •Ê Ê •Ê ÊÊ •Ê Ê ÊÊ •Ê Ê
ÊÊ Ê ÊÊ •Ê Ê Ê Ê•Ê •Ê Ê ÊÊ Ê Ê •Ê •
Ê •Ê Ê ÊÊ •Ê Ê Ê
ÊÊ •Ê •ÊÊ ÊÊ Ê •Ê
ÊÊ Ê ÊÊ •Ê Ê Ê
ÊÊ Ê ÊÊ ÊÊ ÊÊ •Ê
CV2T6
Ê •Ê Ê ÊÊ Ê Ê •Ê
CV2T6
Ê •Ê Ê ÊÊ Ê Ê •Ê
CV2T6
Ê •Ê Ê ÊÊ Ê Ê •Ê
CV2T6
ÊÊ •Ê ÊÊ ÊÊ ÊÊ ÊÊ •Ê
36"only
1.800.735.4328 | THERMADOR.COM
139
VENTILATION BLOWER OPTIONS
INTEGRAL (MOUNTED ON hOOD)
vTn600Cv2C - 600 CFM vTn600F - 600 CFM vTn630C - 600 CFM
83/4"
81/4"
25"
vTn1080F - 1000 CFM vTn1000F - 1200 CFM
REMOTE (MOUNTED TO ROOF OR EXTERNAL WALL)
vTR630D - 600 CFM
vTR1030D - 1000 CFM
vTn1030C - 1000 CFM
81/4"
25"
vTR1330E - 1300 CFM
140
INLINE (MOUNTED BETWEEN KITChEN AND EXTERNAL WALL)
vTi610D - 600 CFM vTi1010D - 1000 CFM
VENTILATION HOODS THAT FIT WITH YOUR KITCHEN
When selecting a ventilation system, choose from one of our two sophisticated appliance collections. Select Professional Series for the ultimate
in cooking and venting power or the Masterpiece® Series for its sleek styling and numerous convenience functions.
WALL HOODS
Wall hoods offer exceptional, quiet performance and distinctive design options.
VENTILATION
• Efficient, high quality, all stainless steel filters
• Halogen lighting
• Deep enclosure area for excellent capture
CHImNEY HOODS
Our chimney style hoods impart a more traditional feel to the kitchen space.
• Adjustable chimney heights suit a range of ceilings
• All stainless steel or stainless steel with glass
designs available
ISLAND HOODS
Thermador island hoods offer excellent overall efficiency in drawing away smoke, moisture and heat.
• An option for when a wall surface is not available
• Push button controls
• Removable dishwasher safe grease collection tray
• Recirculation option at 600 CFM
• Halogen lighting
• Dishwasher safe, stainless steel frame filters
• Automatic “Time-to-Clean-Filter” reminder light
• Halogen or fluorescent lighting
• All stainless steel or stainless steel with elegant
glass canopy design
CUSTOm INSERTS
To create a seamless design with wall or island applications, use custom hood inserts.
• Available options for all types of cooking surfaces
• User-friendly ventilation controls or remote
control options
DOWNDRAFTS
Downdraft ventilation offers space efficiency and a sleek look for non-professional cooktops.
• Over 13-inch intake
• Full face filter combines a filter with splatter shield
in one easy-to-remove, dishwasher safe element
1.800.735.4328 | THERMADOR.COM
• Wall or island applications
• Halogen lighting
• Wall or island applications
• 600 CFM recirculation kit option with integral
blower is available for difficult-to-duct situations
141
142
MODEL HPWB48FS SHOWN WITH 48-INCH PRO HARMONY® RANGE PRD486GDHU
AND 36-INCH WARMING DRAWER WDF30EP
VENTILATION
WALL HOODS
VENTILATION — WALL HOODS
Thermador Wall Hoods put the finishing touch on your cooking
system, with deep capture areas for the best overall efficiency
in drawing away smoke, moisture and heat. These elegant
hoods combine style with vigorous performance, generating
ventilation power from 600 to 1,300 CFM. Available in a
variety of heights, widths and depths, they accommodate your
individual venting needs. All models include brilliant halogen
lighting for enhanced visibility and convenient speed controls.
For ultra-simple cleanup, the removable filters and grease
collection trays fit easily in your dishwasher.
1.800.735.4328 | THERMADOR.COM
143
WALL HOODS FEATURES & BENEFITS
HALOgEN LIgHTS
Bright halogen lighting spotlights your best recipes.
DELAYED SHUTOFF
For the greatest efficiency, our Professional ventilation
models include delayed shut-off to tackle lingering odors.
(Except HMWB30FS, HMWB36FS)
PLANNINg INFORmATION
BAFFLE FILTERS
Unique low-profile baffle
filters maximize grease
capture without affecting flow,
and they’re dishwasher safe
for easy clean-up.
POWERFUL VENTILATION
Breathe deeply with the air-freshening power of up to 1,300
CFM. Our new HPWB Series Professional Hood now has blower
included for ease of installation.
TImE-TO-CLEAN-FILTER LIgHT
Easy clean-up: all Thermador ventilation filters are dishwasher
safe, and many hoods feature a built-in Time-to-Clean-Filter
reminder light. (Except HMWB30FS, HMWB36FS)
KEEP-HOT SHELF
Hold dishes at serving temperature on our optional Keep-Hot
Shelf. (PH30CS, PH36CS, PH42CS, PH48CS and PH54CS only)
EXTERIOR CONTROLS
Easy-to-clean, easy-to-use
push-button controls put
accuracy at your fingertips.
144
mODEL OPTIONS
When selecting a ventilation system, choose from
one of our two sophisticated appliance collections.
Select Professional Series for the ultimate in cooking
and venting power or the Masterpiece® Series for its
sleek styling and numerous convenience functions.
Thermador Wall Hoods are available in various
depths and heights to fit your kitchen plans and are
meticulously crafted for both function and design.
Be sure to reference the correct model information
in this design guide.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Wall Hood is properly installed and grounded by a
qualified technician. Installation, electrical connections and grounding must
comply with all applicable local codes.
Install a suitable conduit box (not furnished). An appropriately-sized, UL-listed
conduit connector must be used to correctly attach the conduit to the junction
box. Remote blowers require a five wire installation.
mODEL REQUIRED CIRCUIT BREAKER
120V AC, 60 Hz
PH30CS, PH36CS, PH42CS,
PH48CS, PH54CS
HPWB30FS, HPWB36FS, HPWB48FS 15 or 20 Amp
HMWN30FS, HMWN36FS,
HMWN48FS
HMWB30FS, HMWB36FS 15 or 20 Amp
20 Amp
15 or 20 Amp
WALL HOODS PLANNINg INFORmATION
VENTILATION — WALL HOODS
INSTALLATION CONSIDERATIONS
The information in this design guide provides key
features, product dimensions, cutouts and installation
specifications. Before installing a Thermador Wall
Hood, be sure to verify the cutout dimensions and
electrical connections. Also, always consult with
the installation manual packed with the product for
complete details before installing.
Thermador Wall Hoods may be installed above a
Thermador Cooktop or Range to create a convenient
cooking center. Refer to the appropriate section for
additional specifications.
HOOD WIDTH
The hood width should be no less than the width of the
cooking surface. Where space is not restricted, a wider
hood can be used to increase your capture area.
DISTANCE FROm COOKINg SURFACE
Proper mounting height is very important. If a hood
is mounted too low, it may be difficult to cook and be
unsafe. If a hood is mounted too high, performance
may be compromised. For optimal performance, the
distance from the cooking surface to the bottom of the
hood should be a minimum of 30", unless otherwise
noted. Please refer to the installation manual for each
hood and cooktop/range model for proper hood
mounting heights.
AVAILABLE CEILINg HEIgHT
The standard ceiling height can vary from region to
region and in homes built in different eras. Ceiling
heights, even in the same room, can sometimes vary by
as much as several inches. Kitchen ceiling heights can
vary between 7'6" (or 90") to over 10' (or 120").
Before selecting a Thermador Hood, check the
available installation space and any extra space that
may remain after proper installation of a hood and
cooktop or range. This extra space can be filled using
Thermador’s stainless steel duct cover accessories or
integrated with kitchen cabinetry. The space can also
be adjusted by raising or lowering your hood within the
recommended range (typically 30" to 36" above the
cooking surface).
CHOOSINg THE CORRECT BLOWER
A variety of interior and exterior blower options
(Remote, Inline or Integral) are available for
Thermador’s Professional and Masterpiece® Series
Hoods. If the unit you have selected does not have
a blower, one can be purchased separately. Blower
selection will vary based on the volume of air that
needs to be moved and the length and location of the
duct run. For long duct runs with multiple turns and
bends, consider using a more powerful blower. For the
most efficient air flow exhaust, use a straight run or as
few elbows as possible.
Remote Blowers (VTR Series)
Depending on your preference and ducting situation, these blowers can be
mounted on the roof or exterior wall of your home. An exterior installation
may be more appealing to reduce noise in the kitchen.
Inline Blowers (VTI series)
To minimize noise in the kitchen, these blowers are mounted along the
duct line anywhere between the kitchen and the exterior wall. If you have
easy access to your duct line (in an attic, for example), this may be an
appealing option.
Integral Blowers (VTN series)
These blowers are purchased separately and integrated into the hood or onto
the downdraft unit at the time of installation. This option allows you to select
your ideal hood with the exact power you require.
CHOOSINg THE RIgHT CFm
The power of the cooktop or range, measured in BTU, is perhaps the most
important factor in determining CFM needs for a hood. Professional gas
cooktops generally should have 1 CFM for every 100 BTU.
You should also consider the cooking space and cooking style of your client.
• More demanding cooks usually require more exhaust capacity to handle
moisture generated by boiling large pots of water or the grease and smoke
resulting from grilling or frying. This cooking style could require a hood or
downdraft system with airflow of 600 to 1,300 CFM.
• For those who are used to preparing quick meals in a relatively small
kitchen, a hood with 600 CFM may be adequate ventilation for the
cooking space.
• If the cooking surface is in a peninsula or island, a larger capacity hood can
provide better capture when there are cross currents and when the hood
needs to be mounted higher. Downdraft ventilation systems are also a good
alternative.
• High heat cooking or aromatic foods may require additional CFM.
Increasing capture area by 3" on each side is also a recommended way to
address this issue.
LENgTH AND SIzE OF DUCTWORK
Do not use flexible duct; it creates back pressure/air turbulence and reduces
performance.
Straight runs and gradual turns are best. Use the shortest route with the
fewest turns possible.
Proper performance is dependent upon proper ducting. Use a qualified and
trained installer. Local building codes may require the use of make-up air
systems when using ducted ventilation systems greater than specified CFM of
air movement. The specified CFM varies from locale to locale. Consult your
HVAC professional for specific requirements in your area.
If using a 10" duct, Thermador recommends not exceeding 150 feet of duct.
Transitions, elbows and wall or roof caps are all factors that will add more
static pressure, therefore increasing your equivalent duct run.
WARRANTY
Limited warranty parts and labor (1 year)
See page 294 for additional warranty details.
1.800.735.4328 | THERMADOR.COM
145
VENTILATION 27-INCH DEPTH WALL HOOD (30"/36"/42"/48"/54")
Models: PH30CS, PH36CS, PH42CS, PH48CS, PH54CS
PERFORMANCE
- 3 fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
- UL approved for damp environments
- Extended capture area ensures removal of smoke and odor
DESIGN
- Brushed stainless steel finish
- Double wall construction
PROFESSIONAL
PH30CS – 30-Inch
PH36CS – 36-Inch
PH42CS – 42-Inch
PH48CS – 48-Inch
PH54CS – 54-Inch
SPECIFICATIONS
Available Hood Widths 30", 36", 42", 48", 54"
UL Approved for Damp
Environments
Blower Sold Separately – See
Duct Size at Discharge 10" Round
Ducting Direction Vertical or Horizontal
Dishwasher Safe Filters Commercial-Style
Halogen Lighting 30", 36", 42" – 2 Bulbs
Infrared Keep-Hot Lights 2
Yes
Blower Options Table
Baffle
48", 54" – 3 Bulbs
- Welded, polished seams for a flawless design
- Easy to operate control buttons
- 27-inch depth hood is a perfect companion to the Pro Grand®
professional range
CONVENIENCE
- Halogen lighting spotlights your best recipes
- 2 Infrared Keep-Hot Lamps hold food warm until serving time
- Dishwasher safe commercial-style baffle filter
- Dimmer lighting
- Grease collection trays are easily removed, dishwasher safe
- After 40 hours of operation, the Clean Filter button illuminates
- Auto start High Heat Sensor
- Delayed shut off tackles lingering odors for up to 10 minutes
- Blowers sold separately
- Hood includes filters, lights, backdraft damper and transition
- Choose from Inline, Remote or Integrated Blowers
146
ACCESSORIES
PHREML – Remote Control Panel
- Overall size: 14 1/2" W x 4 3/8" H
- For use with PH_CS
- Stainless steel finish
- Cable-connected to blower
and hood controls
- Cable length: 30 ft.
DC__US – 6-Inch High Duct Cover
DCT__US – 12-Inch High Duct Cover
For use with PH__DS, HPWB__FS,
HMWN__FS and HMWB__FS
Width 6-Inch High 12-Inch High
30-Inch DC30US DCT30US
36-Inch DC36US DCT36US
42-Inch N/A DCT42US
48-Inch DC48US DCT48US
KHS__QS – Keep-Hot Shelf
(30"/36"/42"/48"/54") KHS30QS/KHS36QS/
KHS42QS/KHS48QS/KHS54QS
- For use with PH_CS
- Stainless steel finish
- Convenient shelf allows dishes to keep hot
at serving temperature. Includes stainless
steel backguard and two shelves.
VENTILATION 27-INCH DEPTH WALL HOOD (30"/36"/42"/48"/54")
INSTALLATION OPTIONS
Thermador Wall Hoods may be installed above a Thermador Cooktop
or Range to create a convenient cooking center. Refer to the appropriate
section for additional specifications.
Hood installation height above a cooktop or range can vary. To obtain
the necessary installation height above a Thermador Professional
Cooktop or Range, consult the appliance's installation manual. Accessory
6" and/or 12" duct covers are used to fill the space between the hood
and ceiling.
Both vertical and horizontal discharge is possible with either mounting
method. The hood is shipped ready for vertical discharge.
VENTILATION — WALL HOODS
Models: PH30CS, PH36CS, PH42CS, PH48CS, PH54CS
BLOWER OPTIONS
REMOTE (Mounted to roof or external wall)
REMOTE
VTR630D – 600 CFM Use RFPLT600 in
VTR630D 600 CFM
VTR1030D 1000 CFM
roof-mount applications
VTR1030D – 1000 CFM Use RFPLT1000 in
VTR1330E – 1300 CFM
roof-mount applications
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM Use WC10 Wall Cap
INTEGRATED
VTN630C – 600 CFM
VTN1030C – 1000 CFM Use WC10 Wall Cap
See page 145 for further details.
INLINE (Mounted between kitchen and external wall) INTEGRAL (Mounted on hood)
VTI610D 600 CFM VTN630C 600 CFM
VTI1010D 1000 CFM VTN1030C 1000 CFM
83/4"
81/4"
25"
VTR1330E 1300 CFM
81/4"
25"
REMOTE BLOWER ACCESSORIES
RFPLT600, RFPLT1000 – Roof plate Material
For use with Remote Blowers VTR630D, VTR1030D and VTR1330E
Combinations
Roof plate Remote Blower
RFPLT600 VTR630D
RFPLT1000 VTR1030D, VTR1330E
Model No. A B C Duct Size
RFPLT600 7
RFPLT1000 9
1.800.735.4328 | THERMADOR.COM
Overall Dimensions
1
/2" 8 1/2" 9 1/4" 6"
3
/8" 12" 11 1/8" 10"
147
VENTILATION 24-INCH DEPTH WALL HOOD WITH BLOWER (30"/36"/48")
Models: HPWB30FS, HPWB36FS, HPWB48FS
PERFORMANCE
- 3 fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
DESIGN
PROFESSIONAL
HPWB30FS – 30-Inch
HPWB36FS – 36-Inch
HPWB48FS – 48-Inch
SPECIFICATIONS
Available Hood Widths 30", 36", 48"
Blower 30" – 600 CFM Blower Included
36" – 1200 CFM Blower Included
48" – 1200 CFM Blower Included
Duct Size at Discharge 10" Round
Ducting Direction Vertical
Dishwasher Safe Filters Low-Profile Baffle
Halogen Lighting 30", 36" – 2 Bulbs
48" – 3 Bulbs
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Stainless steel button controls
CAPACITY
- Integrated Blower included
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher safe low-profile baffle filters
- Grease collection trays are easily removed, dishwasher safe
- Built-in Clean Filter Reminder light
- Delayed shut off tackles lingering odors for up to 10 minutes
- Hood includes filters, backdraft damper and transition
- Accessories include: 6" Duct Covers or 12" Duct Covers
148
ACCESSORIES
DC__US – 6-Inch High Duct Cover
DCT__US – 12-Inch High Duct Cover
For use with PH__DS, HPWB__FS,
HMWN__FS and HMWB__FS
Width 6-Inch High 12-Inch High
30-Inch DC30US DCT30US
36-Inch DC36US DCT36US
48-Inch DC48US DCT48US
RECIRC__FS – Recirculation Kit
(30"/36") RECIRC30FS/RECIRC36FS
- For use with HPWB30FS, HMWN__FS
and HMWB__FS
- Stainless steel finish
- Perfect for hard to duct installations
- Use with 600 CFM blowers only
4"
30" , 36"
CHFILT3036 – Replacement Charcoal Filters
For use with Recirculation Kit
12"
Loading...