Thermador VCI230DS Specsheet
VCI230DS
30-INCH CUSTOM INSERT
MASTERPIECE® SERIES
FEATURES & BENEFITS
- Suitable for wall or island applications
- Three fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
®
- Powerfully quiet
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Custom Hood Liner LINER30
Remote Control Panel VCI2REMFS
30" Bafe Filter BAFFLT30
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
8" Wall Cap WC8
10" Wall Cap WC10
Roof Jack and Transition RJ310
Remote Control Panel
ventilation systems
GENERAL PROPERTIES
Operating Mode Ducted
Number of Speed Settings 3-Stage
Motor Location N/A
Number of Lights 2
Bulb Type 20 W - G4 Base
Total Power of the Lamps (W) 20 W
Damper Included No
Grease Filter Material Washable Synthetic
Grease Filter Type Mesh
TECHNICAL DETAILS
Watts (W) 40 W
Current (A) 15 A
Volts (V) 120 V
Frequency (Hz) 60 Hz
Plug Type 120V-3 Prong
Power Cord / Conduit Length (in)
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop/Range
Cooking Surface
Diameter of Air Duct (in.) Top 10"
Net Weight (lbs) 24 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood) VTI610P* - 600 CFM
WARRANTY
Limited Warranty Parts and Labor 2 Year
*Inline blower can be used as an integr ated solution. Refer to installati on manual for details.
1
/
8
51
"
5 3/4" x 28" x 18 5/8"
30" Electric / 30" Gas
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTI1010P* - 1000 CFM
Bafe Filters
Page 1 of 6
05 / 18
VCI230DS
30-INCH CUSTOM INSERT
MASTERPIECE® SERIES
HOOD DIMENSIONS
CUTOUT FOR INSERT WITHOUT LINER ACCESSORY
Page 2 of 6
05 / 18
Loading...