Thermador DWHD651GFP/18, DWHD650GPR/18, DWHD650GPR/16, DWHD650GFP/18 Owner’s Manual

Congratulations, and Thank You from Thermadod

Thank you for selecting a Thermador dishwasher. You have joined the many consumers who demand quiet and superior performance from their dishwashers.

This manual was written with your safety and convenience in mind, and the information contained herein is very important. We highly recommend that you read this manual before you use your

dishwasher for the first time.

To learn even more about your dishwasher and available accessories, as well as many other top quality Thermador appliances, visit our website at www.thermador.com.

Please contact us if you have any questions or comments. You can call us at 1-800-735-4328, or you can write us at

Thermador

5551 McFadden Avenue

Huntington Beach, CA 92649

IMPORTANT SAFETY INSTRUCTIONS ............................................................................................................. 3

Getting to know your appliance ............................................................................................................................ 4

Dishwasher Components ..................................................................................................................................... 5

Dishwasher Setup ................................................................................................................................................ 6

Salt ....................................................................................................................................................................... 7

Detergent .............................................................................................................................................................. 7

Rinse Agent .......................................................................................................................................................... 8

Dishware Materials ............................................................................................................................................... 9

Loading the Dishwasher ................................................................................................................................ 10-11

Rack Accessories ............................................................................................................................................... 12

Wash Cycle Information ..................................................................................................................................... 13

Additional Options and Features ................................................................................................................... 14-15

Operating the Unit ......................................................................................................................................... 15-16

Care and Maintenance .................................................................................................................................. 17-18

Self Help ........................................................................................................................................................ 19-20

Customer Service ............................................................................................................................................... 21

Limited Product Warranty ................................................................................................................................... 22

NOTICE

Never use steam cleaning products to clean your dishwasher. The manufacturer will not be liable for possible damages or consequences.

It is highly recommended for the end use consumer to become familiar with the procedure to shut off the incoming water supply and the procedure to shut off the incoming power supply. See the Installation Instructions or speak with your installer

for more information.

_ WARNING

Misuse of the dishwasher can result in serious injury or death. Do not use the dishwasher in any way not covered in this manual or for any purpose other than those explained on the following pages.

Severe product damage and/or injury could result from the use of unqualified service technicians or non-original replacement parts. All repairs must be performed by a qualified service technician using only original equipment factory replacement parts.

Electrical shock or fire could result if the electrical supply for the dishwasher covered in this manual is incorrectly installed or if the dishwasher has been improperly grounded. Do not use the dishwasher covered in this manual if you are not certain the electrical supply has been correctly installed or the dishwasher has been properly grounded.

Never use harsh chemicals to clean your dishwasher. Some chloride-containing cleaning products can damage your dish- washer and may present health hazards!

Warning: To reduce the risk of fire, electrical shock, or serious injury, observe the following:

• This appliance must be grounded to a metal, permanent wiring system, or an equipment grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the dishwasher. See the Installation Instructions included with this dishwasher for more information on electrical requirements.

• Use this dishwasher only for its intended function, which is the washing of household dishware and kitchenware.

• This dishwasher is provided with Installation Instructions and this Use and Care Manual, Please read and understand all instructions before using the dishwasher.

• Use only detergents or rinsing agents recommended for use in a dishwasher, and keep them out of the reach of chil- dren.

• When loading items to be washed:

- Locate sharp items so that they are not likely to damage the door seal.

- Load knives and other sharp utensils with their HANDLES UP to reduce the risk of cut-type injuries.

• Do not wash plastic items unless they are marked "dishwasher safe" or the equivalent. For plastic items not so marked, check the manufacturer's recommendations.

• Do not operate your dishwasher unless all enclosure panels are in place.

• Do not tamper with or override controls and interlocks.

• Do not abuse, sit on, or stand on the door or dish racks of the dishwasher.

• To reduce the risk of injury, do not allow children to play in or on the dishwasher.

• When children become old enough to operate the appliance, it is the legal responsibility of the parents or legal guardians to ensure that they are instructed in safe practices by qualified persons.

• Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. Hydrogen gas is explosive. Before using a dishwasher that is connected to a hot water system that has been unused for two weeks or longer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is explosive, do not smoke or use an open flame during this

time.

• Remove the door to the washing compartment when removing an old dishwasher from service or discarding.

• To avoid floor damage and possible mold growth, do not allow wet areas to remain around or under the dishwasher.

• Protect your dishwasher from the elements. Protect against freezing to avoid possible damage to the fill valve. Damage caused by freezing is not covered by the warranty.

Getting to know your Applia nee

0÷00®®

011 ((" "_'_ Half

Off _ Load

Start

1 =On/Off Button

2 =Wash Cycles

3 =Digital Display

4 - Delay Start

5 =Additional cycle options

6 =Start Button

Dis hWa sh er C 0 rn pon e nts i i i

Extra Tall

item Sprinkler

interior Light (hidden)

Cutlery Rack

Top Rack

_WITH CUTLERY

Top Rack Spray Arm

RACK

Tablet Collecting Tray

Bottom Rack Spray Arm Salt Container

Bottom Rack

Rinse Aid Dispenser

Detergent Dispenser

Knife Rack

Top Rack

Top Rack Spray Arm

Tablet Collecting Tray

Bottom Rack Spray Arm Salt Container

Filter System

Bottom Rack

Rinse Aid Dispenser Detergent Dispenser

Watersoftening system

The dishwasher requires soft water to ensure proper washing results. Your appliance is equipped with an internal water softening system. However, if you have a household water softening system, you will not need to use this softening system.

The required amount of salt depends on the degree of hardness of your tap water (See table for more information). For the water softening system to function properly, it will need to use dishwasher water softener salt .The amount of salt dispensed can be set from "H:00" to " H:07". Salt is not required at H:00 (this is the default factory setting). , Open the door (for hidden controls only). , Turn the unit on using the ON/OFF button.

, Hold down the [A] button and press START button until the display

indicates "H:00".

, Release both buttons. , Press [B] to select the desired setting.

To change the setting, , Press [C] button to select desired setting. , Save the selected settings by pressing the START button. , Close the door (for hidden controls only).

NOTE: For information on how to use the water hardness test strip, provided in the detergent sample kit, please see below.

tap set value use

water hardness at

ppm CaCO3/I dishwasher salt 0-110

120 - 140 150 - 180 190 - 210 220 - 290

300 - 370 380 - 540 550 - 890

Default setting from factory is H:00

H:00 no H:01 yes

H:02 yes H:03 yes H:04 yes H:05 yes H:06 yes H:07 yes

Using a water hardness test strip

(t _), (e_ht ab- s (I _), _uttez ;

_Glt%_n u_ nach w_r ar_ _pare !_ deau et _m- ; zur mung

1 mtn a . _r i m_n, p_z _ 1 mR, , _r

I DDDDI I DDDNI

I DDNNI I DNNNI I mmmml

>_ ;_ ,_ )aduret¢deteau

0 0 2

no no

yes yes

yes

Salt

Using salt Refill the salt container (using the funnel supplied to pour) before switching on the unit to ensure that salt overflow is immediately washed away. This prevents corrosion. . Open the screw-type cap of the salt container.

. Fill the tank with water (only required when switching on the unit for

the first time).

. Add salt (dishwasher water softening salt) until the water is displaced

and runs out.

. Fill with salt as soon as the salt refill indicator "_1" or LED is lit. WARNING

Never fill the salt dispenser with detergent. You will destroy the water softening system.To prevent corrosion, refill with salt and immediately begin any cycle.

NOTE: Refill salt in the appliance only when the salt refill indicator is lit. Do not use salt tablets or any salt other than dishwasher water softening salt. For more information about ordering salt please contact Customer Service. You could

buy special dishwasher salt as spare part 469559 or as accessory SGZ9091UC.

D ete rg e n I:

Use only detergent specifically designed for dishwashers. For best results, use fresh dishwashing detergent. The dishwasher is also equipped with a tablet collecting tray, designed to fully dissolve detergent tabs.

NOTICE To avoid dishwasher damage, do not use hand dishwashing products in your

dishwasher.

* model dependent

.2TBS(25ML) 1TBS (1.5 ML)

This dishwasher uses less water so you need to use less detergent. With soft water, 1 tablespoon (15ml) of detergent will clean most loads. The

detergent dispenser cup has lines that measure detergent to 1 tablespoon (15ml) and 1.75 tablespoons (25ml). 3 tablespoons (45ml) of detergent will completely fill the detergent dispenser cup.

NOTE: if you do not know the hardness of your water supply, use 15ml of detergent, increase the amount of detergent, if necessary, to the least

amount required to get your dishware and kitchenware clean. To Close:

Place finger as shown above, slide forward, then press down FIRMLY until you hear a CLICK.

To Open: Push button as shown in the figure.

Table 1 - Recommended Detergent Amount

Water Type

Wash

Cycle

Power ml 45 45 25-45

Scrub

Auto ml 25-45 25 15-25

Wash Tbsp 1.75 to 3 1.75 1to 1.75

Regular ml 25-45 25 15-25

Wash Tbsp 1.75to3 1.75 ltol.75

Delicate ml 25 15-25 15

Quick/ ml 25 15-25 15

Glass

Care Tbsp 1.75 1to 1.75 1

Unit Hard Medium Soft

Tbsp 3 3 1.75 to 3

Tbsp 1.75 1 to 1.75 1

Add Detergent

To close the cover

To open the cover

To achieve proper drying, always use a liquid rinse agent, even if your detergent contains a rinse agent or drying additive.

Rinse Agent Dispenser Open the rinse agent dispenser by lifting the tab with your thumb.

NOTE: The dishwasher indicates low rinse agent either by showing the symbol _ in the countdown display, or illuminating the refill rinse agent

4A%

light (model dependent).

Add liquid rinse agent to the dispenser as shown until the rinse agent reservoir is full. Wipe up any excess rinse agent that puddles when the

dispenser reservoir is full.

Setting amount of rinse-aid The amount of rinse-aid dispensed can be set from "r:00" to "r:06".

, Open the door (for hidden controls only). , Turn unit on by pressing the ON/OFF button. , Hold down button [A] (see page 4) and press START until the display

indicates "H:00"

, Release both buttons. , Press [A] button until the display indicates "r:05".

, Press [C]to select the desired setting.

, "r:00" means the Rinse Agent dispenser is off. , "r:01" means the Rinse

, "r:02" means the Rinse , "r:03" means the Rinse , "r:04" means the Rinse , "r:05" means the Rinse . "r:06"

Save the selected setting by pressing the START button.

Close the door (for hidden controls only).

means the Rinse Agent dispenser is at the highest setting

Agent dispenser is at the lowest setting. Agent dispenser is low setting.

Agent dispenser is medium setting. Agent dispenser is medium high setting.

Agent dispenser is high setting.

Switching off rinse-aid refill indicator , Set the rinse aid option to r:00

NOTE: Do not change the amount of rinse-aid unless there are streaks (select lower setting) or water stains (select higher setting) visible on the utensils,

NOTE: Before using your dishwasher for the first time, check the information in this section. Some items are

not dishwasher safe and should be hand-washed; others require special loading. Contact the item's manufacturer if

you are unsure about the item's dishwasher suitability.

Recommended Aluminum: Colored anodized aluminum may fade over

time. Minerals in your water may cause the aluminum to darken or spot. This can usually be removed by using a soap-filled steel wool pad.

China, Crystal, Stoneware: Some hand-painted pieces may discolor, fade, or spot. Hand-wash these pieces.

Position fragile glassware so that it will not topple over or contact other pieces during the wash cycle. Glass: Milk glass may yellow.

Non-Stick Coatings: Apply a light coating of vegetable oil to non-stick surfaces after drying.

Plastics: Make sure the piece is dishwasher safe.

UPPER RACK =14 PLACE SETTING

LOWER RACK- 14 PLACE SETTING

Stainless Steel, Sterling Silver, and Silver Plate: Place these pieces so that they do not contact dissimilar

metals.

Not Recommended Acrylic: Crazing (small cracks throughout the acrylic) may

occur.

Adhesive-Joined Pieces: Adhesives that join materials such as plastic, wood, bone, steel copper, tin, etc. may

loosen.

Bone=Handled Utensils: Handles may separate.

Iron: Iron will rust. Hand-wash and dry immediately.

Non=Dishware Items: Your dishwasher is intended for use in cleaning ONLY standard household dishware and

kitchenware.

Pewter, Brass, Bronze: Pewter will tarnish. Hand-wash and dry immediately.

CUTLERY RACK - 14 PLACE SETTING

Tin: Tin will rust. Hand-wash and dry immediately.

Wood: Wooden bowls, wooden utensils, and wood-han- dled utensils can crack, warp, and lose their finish.

UPPER RACK - 12 PLACE SETTING LOWER RACK =12 PLACE SETTING

SILVERWARE BASKET - 12 PLACE SETTING

1 - Salad Fork

2 - Tea Spoon

3- Dinner Fork

4 - Knife

f .....................

5 - Table Spoon 6 - Serving Spoon 7 - Serving Fork

©C O E]OE]O OlDE] [D

CD©E]OOE]@ E]

[3OO[3 E]OO(D

@00_

Loading the Dishwasher Do not pre-wash items having loosely-attached soiling. Remove large food particles, bones, seeds, toothpicks, and excessive grease. Items having burned-on, baked-on or starchy soils may require pre-treatment.

Load only dishwasher-safe items into the dishwasher. Load dishes in the dishwasher racks so that the insides of bowls, pots, and pans are face downwards. Avoid nesting and contact points between dishes. Separate items

of dissimilar metals.

UPPER RACK - 10 PLACE SETTING LOWER RACK - 10 PLACE SETTING

CUTLERY RACK - 10 PLACE SETTING

UPPER RACK - 12 PLACE SETTING

LOWER RACK - 12 PLACE SETTING

CUTLERY RACK - 12 PLACE SETTING

Rack Accessories

Flip Tines * Flip Tines fold down to make loading the racks easier in some

instances. Grasp the tines, release from notch, and fold the tines downward. When the top rack is loaded, push it into the dishwasher.

Cutlery drawer * Arrange the cutlery in the cutlery rack as illustrated. Separately arranged utensils are easier to remove after washing. The rack is

removable.

Plastic Item Clips * Light-weight plastic accessories, e.g. cups, lids, etc. can be held

securely by the small accessories holders.

Adjusting the height of the rack The height of the upper rack can be adjusted in 3 stages to create more space either in the upper or lower rack.

, Pull out the top rack. , To lower the rack, push the lever inwards then upwards.

, To raise the rack, hold the basket on the sides of the upper edge

and lift it up.

Before re-inserting the rack again, ensure that it is at the same height on both sides. Otherwise, the appliance door cannot be closed and

the upper spray arm will not be connected to the water circuit.

* model dependent

Power Scrub Plus _]_'r Cleans items having baked-on or hard dried-on food soils. These items may

require soaking or hand scouring.

Auto Wash @ Takes the guesswork out of cycle selection. The sensors in the dishwasher

automatically adjust cycle length, temperature and water changes based on the soil load. This cycle is appropriate for mixed loads.

Delicate Wash For delicate or heirloom dishwasher and silverware or other special items.

Always make sure that the items are dishwasher safe. Refer to the Materials section of this manual for further information. Hand washing may be the best

treatment of such items.

Regular Wash Thoroughly cleans large loads having loosely attached normal soiling.

Quick Wash For lightly soiled items with easy to remove food soils.

Glass Care A cycle for lightly soiled dishes which is ideal for temperature sensitive dishes

or cutlery. In this cycle the temperature is reduced to help prevent dishes from becoming damaged. It is especially helpful to reduce a cloudy or etched

appearance on glasses. Note: Some glasses are more prone to etching due to the glass manufacturing

process.

cycle time [mini water consumption [I]

[gal]

wash temperature [°C] wash temperature [°F]

rinse temperature [°C] rinse temperature [°F]

[gal]

110 - 135

18,1 - 23,7

4,8-6,3

66 - 71

150 - 160

156

115

17.5

4.6

145

23.7

6.3

105 - 129

12,6 - 19,8

3,3 - 5,2

55 - 66

130 - 150

156

80 - 85

8,8 - 13,9

2,3 - 3,7

45 - 50

113- 122

145

95- 119

5,8- 16,9

1,5-4,5

50 - 55

122- 131

51 - 69

124- 156

10.3

2.7 45

113

122

12.9

3.4 5O

122

140

11.7

3.1

12.9

3.4

* modeldependant Half Load*_

If you haveonlya few items to wash (e.g. glasses, cups, plates), you can

switch to "half load". This will save water, energy and time. It is recommended to put a little less detergent in the detergent dispenser than for a full load.

Extra Wash * Cycle option can be selected to increase wash performance with more water

used in extra sequences and at higher temperatures.

Sanitize option *

All models are designed to sanitize the loaded dishes. You must press the Sanitize Option button to active the Sanitation features. The technical Sanitation measures may also improve the drying results

Eco Action * Lowers temperature and slightly increase

performance while lowering energy usage.

cycle length to maintain

Additional Features

EcoSense Wash Management System* An advanced sensor system determines the soil level in the wash water and automatically deletes fresh water fills if they're not needed, saving you time and money, while cutting energy usage.

Sanitized A dishwasher cycle that has the Sanitized symbol has been tested to meet

very strict requirements of wash time and water temperature to ensure dishware and kitchenware sanitization.

Time remaining Indicator When the program is selected, the remaining running time of the program

is indicated on the digital display. The running time is determined during the program by the water temperature, the number of utensils as well as the degree of soiling and may vary (depending on the selected program).

InfoLight* An LED illuminates the floor to indicate unit is running. Do not open the dishwasher door until the LED is no longer visible on the floor. If the appliance is installed at eye-level, the LED is not visible. , Turn unit on by pressing the ON/OFF button. , Hold down button [A] and press START until the display indicates "H:00".

Release both buttons

, The LED for [A] flashes and display indicates "H:04". , Press [A] until the display shows "1:01" , Press [C] to switch between "1:01" and "1:00" and press START to

save.

Delay start You can delay the start of the program in 1-hour steps up to 24 hours.

, Open the door (for hidden controls only). Turn unit on using the ON/OFF button. , Press "+" button until the timer programming display jumps to 01 .

, Press + or- button until the displayed time corresponds with your requirements. , Press START button. Delay start is activated.

To cancel delay start: , Press the + or- button until "00" is indicated on the digital display.

You can change your program selection at any time until the program starts. , Close the door (for hidden controls only).

Cycle Completion Signal The cycle completion is also indicated by a tone.This function can be changed as

follows: , Open the door (for hidden controls only). Turn unit on using the ON/OFF button.

, Hold down [A] button and press START button until the display shows H:00. , Release both buttons.

, Press [A] until the display shows "b:02". , Press [C] to increase or decrease the tone.

• b:00 = Off and b:03 = loudest , Press START to save the setting.

Intensive drying The final rinse uses a higher temperature which improves the drying result. The running time may increase slightly. (Caution if utensils are delicate!) , Open the door. (for hidden controls only). Turn unit on using the ON/OFF button.

Hold down [A] button and press START the digital display shows "H:00".

, Release both buttons. , Press button [A] until the display indicates "d:00"

To change the setting, , Press button [C] (see page 4) to turn intensive drying ON = d:01 or OFF = d:00

, Press START button. The set value is saved. , Close the door (for hidden controls only).

Switching on the appliance , Open the door (for hidden controls only).

, Turn unit on by pressing the ON/OFF switch. The display of the last

selected program flashes.

, The expected program duration flashes on the digital display. , Press the START button.

, Close the door (for hidden controls only). The program starts running.

Interrupting the cycle , Open the door (for hidden controls only). , Press the ON/OFF button. The LEDs go out. The program is saved. If the door

was opened on an appliance which has a warm water connection or is heated, first leave the door ajar for several minutes and then close. Otherwise, expansion (pressure) may cause the appliance door to spring open or water to run out of the

appliance. , To continue the program, switch on the ON/OFF switch again. , Close the door. (for hidden controls only)

Terminatingthe program

When the display indicates "0:00" it means the cycle has ended. The end of cycle is also indicated by a cycle completion signal in select models.

, Open the door (for hidden controls only).

, Press START button for approx 3 sec.until 0:01 is displayed. , Close the door. The program sequence lasts approx. 1 min.

, The display will indicate 0:00 , Open the door.Press the ON/OFF button.

, Close the door. (for hidden controls only)

Child-proof Button *(select models) You can activate this option to prevent accidental changes to the running program by children.

To activate: , Start the required program. Hold down button [B] for approx. 4 seconds until the display indicates:

CL The "CL" will be indicated now if any button is pressed and the program will not be reset. To deactivate:

, Hold down button [B] for approx. 4 seconds until the display window no longer indicates "CL". Child-proof lock * (select models)

The Child Safety Lock is designed to prevent children from opening the dishwasher.

, To lock the door, push the slider below the door grip to the right. , To unlock the door, push the slider to the left.

Extra Tall item Sprinkler *

If an item is too tall to be placed into the bottom rack even with the top rack in the raised position, remove the empty top rack by pulling it out of the dishwasher until it stops rolling. Pull the front of the rack upward and outward until the rollers are completely free of the roller guides. Set the top rack aside. Push the

roller guides back into the dishwasher.

Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprinkler clockwise to lock it into position as shown above. Place your extra tall item(s) in the bottom rack as shown above.

NOTE: Keep the vent on the tub's right side clear by placing tall items such as plastic cutting boards and tall baking sheets on the bottom rack's left side, center, or back.

interior Light * (select models)

The interior light comes on when the door is opened regardless of whether the unit is powered ON or OFF. When the door is closed or ajar, the light

is off.

, Open the door.(for hidden controls only) , Switch on ON/OFF switch.

, Hold down programme button [A] and press START button until H:0 is

indicated on the digital display. , Release both buttons.

, The LED for button [A] flashes and the digital display displays the

factory setting H:04. , Press programme button [A] until the factory set value E:01 is indicated

on the digital display. To change the setting, , Press the button [C] to switch the interior light off E:00 or on E:01.

, Press START button. The set value is saved.

, Close the door.(for hidden controls only)

Maintenance and Care

A regular inspection and maintenance of your machine will help to prevent faults. This saves time and prevents problems.

Overall condition of the machine Check spray arm for grease and limescale deposits.

If you find such deposits: , Fill detergent dispenser with detergent.

, Start the appliance without utensils in the program with the highest

rinsing temperature. Clean the appliance with detergents/appliance cleaners which are particularly suitable for use with dishwashers. , Regularly clean door seal with a damp cloth.

Never use a steam cleaner to clean your dishwasher. The manufacturer is not liable for any consequential damage.

Regularly wipe the front of the appliance and fascia with a damp cloth; water and a little washing up liquid are adequate.

Do not use sponges with a rough surface or abrasive detergents, as these could scratch the surfaces.

Stainless steel appliances: To prevent corrosion, avoid using sponge cloths or wash them out thoroughly several times before using for the

first time.

Filters Thefilterskeeplargeforeignobjectsin the rinsing water away from the pump.

These foreign objects may occasionally block the filters. The filter system consists of a coarse filter, a flat fine filter and a microfilter. , After each washing cycle check the filters for residue. , Unscrew filter cylinder as illustrated and take out filter system. , Remove any residue and clean filters under running water.

, Re-install filter system in reverse sequence and ensure that the arrow

marks are opposite each other after closing the filter system.

Spray arms Limescale and contaminants in the rinsing water may block nozzles and

bearings on the spray arms. , Check outlet nozzles on the spray arms for blockages. , Unscrew the upper spray arm. , Remove the lower spray arm.

Waste water pump Large food remnants in the rinsing water not retained by the filters may block the waste water pump. The rinsing water does not get pumped out and covers

the filter. In this case:

, Disconnect the appliance from the power supply. , Remove the filters.

, Scoop out water, use a sponge if required. , Using a spoon, prise off pump cover(as illustrated) until it clicks, then grip

the cover by the lug and first pull it upwards until it resists and then pull it

out forwards. , Check inner compartment and remove any foreign objects.

, Place cover in the original position, press down and engage. , Install filters

Winterizing your Unit Transportation (MG) Empty the dishwasher and secure loose parts. Drain the appliance according to the following steps: , Turn on the tap.

, Close the door. , Switch on ON/OFF switch.

, Select programme with the highest temperature. The expected programme duration is indicated on the numerical display 8. , Press START button )".

Programme sequence starts. , After approx. 4 minutes press the START button )" until 0:01 is indicated

on the digital display. After approx. 1 min 0:00 is indicated on the digital display. , Switch the appliance off (and turn the tap off).

Transport appliance upright only. (This prevents residual water from running into the machine control and damaging the programme sequence.)

If the appliance is in a room where there is a risk of frost (e.g. holiday home), empty the appliance completely (see Transportation).

, Turn off the tap, disconnect supply hose and drain water.

SELF HELP

Dishwashers may occasionally exhibit problems that are unrelated to a malfunction of the dishwasher itself. The following information may help you with a dishwasher problem without involving a repair professional.

Problem

Dishwasher

does not start

Dishwasher beeping (end

of cycle signal)

Display does not illuminate

or console

lights are not

Dishwasher

seems to run a

long time

Dishes aren't

getting clean enough

Dishes are not

getting dry enough

Cause

Door may not be properly latched.

Unit may not be turned on.

Unit not reset or previous cycle not completed.

Delay start engaged.

Interruption of electrical power supply to dishwash- er or blown fuse.

Child lock activated (select models).

The door may have been closed without first select-

ing a cycle.

Water supply may not be turned on.

Default factory settings alert the customer that the cycle has completed by beeping. This feature can be

deactivated if so desired.

1. A fuse may have been blown or circuit breaker tripped.

2. Door not closed or latched.

Note: For models with controls on the top portion of the door, the display only illuminates when the door isopened and

controls are visible.

1. Incoming water is not warm enough.

2. Cycle time can vary due to soil and water condi- tions.

3. Rinse agent dispenser is empty.

4. Dishwasher connected to cold water supply.

Note: Refer to "Cycle Chart Data" section in this manual

for typical cycle length.

1. Spray arm movement is obstructed.

2. Spray arm nozzles clogged.

3. Improper use of detergents.

4. Filters could be clogged.

5. Dishes are nested or loaded too close together.

6. Selected wash cycle is not suitable for food soil

condtions.

1. Rinse agent dispenser is empty. (Rinse agent indica- tor is activated).

2. Improper loading of dishes.

3. Selected cycle does not include drying.

Note: Plastic or Teflon do not typically dry as completely as other items due to their inherent properties.

Action

1. Shut the door completely.

2. Press the main power switch to turn unit on.

3. To reset, refer to "Canceling or changing the cycle" section in this manual.

4. To reset, refer to "Delay Start" section in this manual.

5. Check circuit breaker.

6. Deactivate the child lock. Refer to "Child Lock" section in this manual if applicable.

7. Select a cycle and close the door.

8. Check and turn on water supply.

To adjust the volume or deactivate, refer to "Cycle Completion Sig-

nal" section in this manual.

1. Check the fuse or circuit breaker box and replace the fuse or re- set the breaker if necessary.

2. Ensure that door is properly latched and completely closed.

1. Before starting a cycle, run hot water faucet at the sink nearest

to the dishwasher.

2. Sensors in the dishwasher automatically increase the cycle time

to ensure a good wash when heavy soil is detected.

3. Add rinse agent.

4. Verify dishwasher isconnected to hot water supply plumbing.

1. Ensure that spray arm movement is not blocked by hand rotating spray arms.

2. Remove the spray arms and clean according to "Check/Clean

the Spray Arm Nozzles" in Care and Maintenance section of this

manual.

3. Increase or decrease detergent depending on the water hard- ness. Refer to Table under "Adding Detergent and Rinse Agent".

4. Clean the filter. Refer to "Check/Clean the Filter System" under Care and Maintenance section of this manual.

5. Rearrange load such that water spray can reach all items in the dishwasher. See also "Preparing and Loading" section of this

manual.

6. Refer to "Wash Cycle" section in Operating the Dishwasher sec-

tion of this manual.

1. Add rinse agent. The use of rinse agent improves drying.

2. Rearrange load to ensure items are not nested. Refer also to the "Preparing and Loading" section of this manual.

3. Rinse and Hold setting does not include drying cycle,

Note: Select models offer an extra heating options to improve drying performance. Refer to "Wash Cycle options" under the Operating

the Dishwasher section of this manual.

Odor

1. Food debris is present at the bottom of the dish- washer.

2. Food particles are present near the door seal.

3. Dishes left too long in unit before running a cycle.

4. Residual water is present at the bottom of the dish- washer.

5. Drain hose is obstructed.

1. Remove the filters and clean according to the "Check/Clean the Filter System" section of this manual.

2. Refer to "Clean the Door Gasket and Door Seal" in the Care and Maintenance section of this manual.

3. Run a Rinse/Hold cycle if you do not intend to immediately wash

the dishes.

4. Ensure the unit has completely drained from the last cycle. Refer to the "Canceling or changing the cycle" section of this manual.

5. Remove any obstructions from the drain hose by calling qualified personnel.

Note: If odor still persists, run the Normal/Regular cycle until it flushes and interrupt the cycle and place an 8 oz. cup of distilled white vinegar solution on the top rack and then finish the cycle.

Problem

Dishwasher not

filling with water

Water Leaks

Tub stains

Streaks on glass- ware or residue

on the dishes Fascia panel

discolored or marked

Noise during

wash cycle

Cause

Restriction in the water supply system.

Previous wash cycle was not completed.

Delay-start is active.

Suds

Door seal could be pulled away from track.

Condensation vent is blocked.

Improper installation.

1. Stains on the dishwasher interior are due to hard- ness of water.

2. Silverware in contact with tub.

Incorrect rinse agent setting.

Abrasive cleaner used.

The dishes may not be arranged properly.

Action

1. Ensure that the water supply valve (typically located under kitch- en sink) isopen and check that the water supply line has no kinks and clogs.

2. Refer to the "Canceling or changing the cycle" section of this manual.

3. Cancel the delay-start or wait until delay-start time completes (times out). Refer to the "Delay Start" section of this manual.

1. Wrong type of detergent results in suds and leaks. Use only dishwasher detergents, if suds still persist, then add one ta- blespoon of vegetable oil at the bottom of the dishwasher and run the desired cycle.

2. Ensure that door seal is in the track.

3. Ensure that condensation vent is not blocked. Refer to "Load- [ng Extra Tall Items" [nthe Preparing and Loadingthe Dish-

washer section of this manual.

4. Have proper installation verified by qualified personnel (wa- ter supply, drain system, leveling, plumbing).

:1. Concentrated Lemon juice can reduce the build up of hard

water stains. Run a normal cycle until it flushes and interrupt the cycle and then place an 8 oz. cup of the concentrated

lemon solution on the top rack and finish the cycle. This can be done periodically to avoid build up.

2. Ensure that the silverware does not make contact with the tub while running a cycle.

Depending on the hardness of water, adjust the rinse agent dis- penser. Refer to "Adding Detergent and Rinse Agent" section in this manual for adjustment.

Use mild detergents with soft damp cloth.

Water circulation sound is normal, but if you suspect items are banging into each other or into the spray arms, refer to the "Pre- paring and Loading" section of this manual for optimal arrange-

ment.

Detergent dis- penser cover will

not shut

Unable to select desired cycle

Error Codes

Water is left in the appliance

at the end of the programme

"Check water supply" display

lights up

:1. Improper operation of detergent coven

2. Previous cycle has not been finished, reset, or cycle was interrupted.

Previous cycle has not finished or another cycle has Refer to the "Canceling or changing the cycle" section of this already started, manual.

If fault code (EO:1to E30) is indicated on the digital display 3, first disconnect the appliance from the power supply. You can rectify certain faults yourself (see following fault description), for all other faults please contact customer service and state the

indicated fault E:XX. :1. :1. See Care and Maintenance.

(E24) Waste water hose is blocked or kinked. (E25) Waste water pump blocked, cover on the

2. 2. Wait until programme ends (digital display indicates 0:00) or waste water pump is not locked in position

Filters blocked.

The programme has not yet ended.

:1. Tap turned off.

2. Water supply interrupted.

3. Supply hose kinked.

4. Filter in the water supply blocked

:1. Refer to "Adding Detergent and Rinse Aid" section of this man-

ual for instructions on opening and closing the dispenser.

2. Refer to the "Canceling or changing the cycle" section of this manual.

implement the "Reset'function.

:1. Switch off the appliance and pull out the main plug.

2. Turn off the tap.

3. Clean filter in the supply hose. LJ

4. Reconnect power supply.

5. Turn on the tap.

6. Switch on the appliance.

+ 46 hidden pages