Texecom Odyssey X, Odyssey X-B, Odyssey X-E, Odyssey X Series, Odyssey X-W Installation Manual

Installation Manual

Odyssey X Series

INS627-2

Odyssey X Installation Manual

Introduction

Odyssey X is a new range of modular external warning d evices available in standard or backlit variants. The modular design allows for a choice of
front covers to be installed on the common backplate. Please see the specification table for full details of each model. Features include: -

• Modular design - Common backplate

• Backlit variants available

• High Intensity White Comfort LED's

• Single or twin piezo versions (Grade 2 or 3 respectively)

• Integral spirit level

• Clip on hinged lid with two "park" positions for easier

installation

Backplate Variants

Several models are available, all are the same size and use the same covers.

Model Features

Odyssey X Grade 3 Sounder & Str obe Unit Twin Piezo

Odyssey X-B Grade 3 Sounder & Str obe Unit with Backlight Twin Piezo

Odyssey X-E Grade 2 Sounder & Strob e Unit Single Piezo

Odyssey X-BE Grade 2 Sounder & Str obe Unit with Backlight Single Pi ezo

Odyssey X-W (Premier Elite V2.11 or later) Grade 2 Wireless Sounder & Strobe Unit Single Piezo

Odyssey X-D Decoy backplate without electronics

Covers Options

Outer Colour & Infill Lens Colour

Black Frame+ White Insert

White Frame + White Inser t

Compatible covers X1 Cover or X3 Cover

• Combined inner lid and removal from mounting tamp er with
adjustable sensitivity

• Adjustable mount ing plates allowing "In situ" drilling

• Choice of Odyssey X1 or X3 front covers

• Backlight may be wired to panel outputs for increased

functionality

• Optional Graphic inserts for company branding

Blue, Red, Opaque White & Gr een

Graphic Inserts

Odyssey X sounders can accommodate a graphic insert, rather than traditional screen printed lids. Graphic inserts can be ordered directly from
Texecom.

Simply follow the instructions and submit your artwork at the following web address. http://www.texe.com/uk/branding.php

Once you have approved and paid for the artwork, inserts will be delivered directly to you.

Installation Workflow

Wired and Wireless O dyssey X have slightly different installation procedures, please make sure to adhere to the following workflow to ensure
trouble free installation and commissioning of your new sounder.

Wired Wireless

1. Select the desired location for the sounder

2. Install 8 core alarm cable from the sounder location back to
the control panel or expander.

3. Install the sounder

4. Commission system

2 INS627-2

1. Install control panel and/or wireless receiver

2. Learn all other wireless devices, and install them in their
desired location

3. Learn wireless sounder

4. Install wireless sounder in desired location

5. Commission system

6. Check signal security of a ll wireless devices