Texecom INS225-3 User Manual

User Guide

Premier LCDP/LCDLP

Issue 2

Installation Manual

Premier LCD/P & LCDL/P

INS180-5

Installation Manual

Veritas Excel Keypad

INS165

Installation Manual

Premier Elite Com300/Com2400

INS175-5

Installation Manual

Premier ComISDN

Issue 3

Installation Manual

Premier Elite ComWiFi

INS644

Installation Manual

Premier Elite ComIP

INS273-6

Product Type - CEJ0000

Installation Manual

Premier Elite TTLCom

INS640

User Guide

Touch-Tone Remote Control

INS225-3

Installation Manual

Premier RKP Flush Mount

Issue 1

Installation Manual

Premier Elite OP16

INS186-3

Installation Manual

Premier Elite 8XP

INS179-6

Installation Manual

Premier 8X

INS163-4

Installation Manual

Premier 32XP-W

INS467

Installation Manual

Premier Elite 8XP-W & Premier Elite 32XP-W

INS467-6

Installation Manual

Premier Elite IXP-W

INS538-2

Manual De Instalación

Premier 8XP

Número 1

Installation Manual

Premier LCD/LCDL

INS180-6

PREMIER LCDL/LCDL
INSTALLATION MANUAL

Manual De Instalación

Premier LCD/LCDL

INS210

Installation Manual

USB-Modem

Issue 3

Installation Manual

Speech Dialler/Speech & Text Dialler

Issue 2

Manuel d’Installation

Speech Dialler/Speech & Text Dialler

INS262

www

.texe.com

User Guide

Speech Dialler/Speech & Text Dialler

Issue 2

Manuel de l’Opérateur

Speech Dialler/Speech & Text Dialler

INS263

Installation Manual

Premier Elite RM8 Relay Module

INS191-4

Touch Tone Remote Control User Guide

INS225-3

Introduction

This guide describes the operating procedures for remotely controlling your alarm
system with a touch-tone telephone (this includes mobile and standard telephones).

This feature is only available on the Premier 816 Plus and Premier 832 intruder alarm
control panels.

Operation

 Establishing a Connection with your Alarm System

1. From a touch-tone telephone, dial the number of your premises (the same

number that the alarm panel is connected to).

2. Wait until the panel has answered your call. You will hear a series of high-

pitched beeps for the first 4 seconds.

3. Press the [*] key on your telephone when you hear the beeps. The beeps will

stop and you will hear one more beep (this confirms that you are connected with
your alarm system).

4. If you hear a continuous tone after the beeps, then you have either not pressed
the [*] key quick enough or the phone you are using is not a touch-tone
telephone.

 Menu [1] - Arm your Alarm System

1. Establish a connection with you alarm system.

2. From the touch-tone telephone enter your normal access code, if the code is

accepted you will hear a high-pitched beep.

3. Press the [1] key on your telephone. Two high-pitched beeps indicate that your
alarm system has been armed successfully. A low-pitched beep indicates that
the system is already armed or the system cannot be armed due to a fault etc.

4. Press the [#] key on your telephone to hang up or press [*] to return to the
start.

 Menu [2] - Disarm your Alarm System

1. Establish a connection with you alarm system.

2. From the touch-tone telephone enter your normal access code, if the code is

accepted you will hear a high-pitched beep.

3. Press the [2] key on your telephone. A high-pitched beep indicates your alarm
system has been disarmed successfully. No beep indicates that the system is
already disarmed.

4. Press the [#] key on your telephone to hang up or press [*] to return to the
start.