How it Works
Texas Instruments
Loading...
TPS2062EVM-296
User Manual
17 pgs360.52 Kb0
Table of contents
Loading...

Texas Instruments TPS2042BEVM-293, TPS2056AEVM-293, TPS2046BEVM-293, TPS2062EVM-293, TPS2062-1EVM-293 User Manual

...
User's Guide
SLVU231A–January 2008–Revised June 2012

Two-Channel, Power-Distribution Switch EVM

This user’s guide describes the TPS20xxEVM-293 and TPS20xxEVM-296 evaluation modules (EVM). This guide contains the EVM schematics, bill of materials, assembly drawings, and top and bottom board layouts.
Contents
1 Introduction .................................................................................................................. 2
2 Schematics and Bill of Materials .......................................................................................... 2
2.3 Bill of Material ...................................................................................................... 5
3 Board Layout ................................................................................................................ 7
4 EVM Setup ................................................................................................................. 10
4.1 Recommended Test Equipment ................................................................................ 10
4.2 Measuring Current Limit ......................................................................................... 10
5 Related Documentation from Texas Instruments ..................................................................... 11
List of Figures
1 TPS20xxEVM-293 Schematic............................................................................................. 3
2 TPS20xxEVM-296 Schematic............................................................................................. 4
3 TPS20xxEVM-293 Component Placement.............................................................................. 7
4 TPS20xxEVM-293 Top-Side Layout...................................................................................... 7
5 TPS20xxEVM-293 Bottom-Side Layout.................................................................................. 8
6 TPS20xxEVM-296 Component Placement.............................................................................. 8
7 TPS20xxEVM-296 Top-Side Layout...................................................................................... 9
8 TPS20xxEVM-296 Bottom-Side Layout.................................................................................. 9
9 EVM Setup For Measuring Current Limit............................................................................... 10
10 TPS2052BEVM-293 Short-Circuit Output Current and OCx Status ............................................... 11
List of Tables
1 TPS20xxEVM-293 Options ................................................................................................ 2
2 TPS20xxEVM-296 Options ................................................................................................ 2
3 TPS20xxEVM-293 Bill of Materials....................................................................................... 5
4 TPS20xxEVM-296 Bill of Materials....................................................................................... 6
SLVU231A–January 2008–Revised June 2012 Two-Channel, Power-Distribution Switch EVM
Submit Documentation Feedback
Copyright © 2008–2012, Texas Instruments Incorporated
1
Introduction

1 Introduction

The TPS20xxEVM-293 and TPS20xxEVM-296 are evaluation modules (EVM) for the Texas Instruments family of two-channel, current-limited, power-distribution switches. These EVMs operate over a 2.7-V to
5.5-V range and provide a continuous output current of up to 1.5 A (see Table 1 and Table 2). Test points provide convenient access to all critical node voltages.
The silkscreen outline on the PCB top-side encloses components found in a typical USB application. The TPS20xxEVM-293 accepts an S0-8 packaged power-distribution switch whereas the TPS20xxEVM-
296 accepts MSOP-8 packaged switch with a thermal pad. These switches have an enable input, an overcurrent status output, and overtemperature shutdown; the switch pinouts are identical.
Table 1 and Table 2 summarize the available EVM options.

2 Schematics and Bill of Materials

2.1 EVM Options

Table 1. TPS20xxEVM-293 Options
www.ti.com
EVM Device Output Current ENABLE
TPS2042BEVM-293 TPS2042BD 0.5 Active Low TPS2046BEVM-293 TPS2046BD 0.25 Active Low TPS2052BEVM-293 TPS2052BD 0.5 Active High TPS2056AEVM-293 TPS2056AD 0.25 Active High
TPS2062EVM-293 TPS2062D 1 Active Low
TPS2062-1EVM-293 TPS2062D-1 1 Active Low
TPS2066EVM-293 TPS2066D 1 Active High
TPS2066CEVM-293 TPS2066CD 1 Active High
Continuous
(A)
Table 2. TPS20xxEVM-296 Options
EVM Device Output Current ENABLE
TPS2042BEVM-296 TPS2042BDGN 0.5 Active Low TPS2052BEVM-296 TPS2052BDGN 0.5 Active High
TPS2060EVM-296 TPS2060DGN 1.5 Active Low TPS2062EVM-296 TPS2062DGN 1 Active Low TPS2064EVM-296 TPS2064DGN 1.5 Active High TPS2066EVM-296 TPS2066DGN 1 Active High
TPS2066-1EVM-296 TPS2066DGN-1 1 Active High
Continuous
(A)
2
Two-Channel, Power-Distribution Switch EVM SLVU231A–January 2008–Revised June 2012
Copyright © 2008–2012, Texas Instruments Incorporated
Submit Documentation Feedback
+
+
SeeTable3.
www.ti.com

2.2 Schematics

Schematics and Bill of Materials
Figure 1. TPS20xxEVM-293 Schematic
SLVU231A–January 2008–Revised June 2012 Two-Channel, Power-Distribution Switch EVM
Submit Documentation Feedback
Copyright © 2008–2012, Texas Instruments Incorporated
3
+
+
SeeTable4.
Schematics and Bill of Materials
www.ti.com
Figure 2. TPS20xxEVM-296 Schematic
4
Two-Channel, Power-Distribution Switch EVM SLVU231A–January 2008–Revised June 2012
Copyright © 2008–2012, Texas Instruments Incorporated
Submit Documentation Feedback
www.ti.com
Schematics and Bill of Materials

2.3 Bill of Material

Table 3. TPS20xxEVM-293 Bill of Materials
QTY RefDes Value Description Size Part Number MFR
-001 -002 -003 -004 -005 -006 -007
1 1 1 1 1 1 1 C1 10 μF Capacitor, Ceramic, 10-uF, X7R, 10V, 10% 1206 STD STD 3 3 3 3 3 3 3 C2–C4 0.1 μF Capacitor, Ceramic, 16V, X7R, 10% 0805 STD STD 2 2 2 2 2 2 2 C5, C6 150 μF Capacitor, Tantalum, 150 μF, 10V, 100 mΩ, 10% 7343 (D) B45197A2157K409 Kemet 1 0 0 0 0 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 500-mA SO8 TPS2042BD TI 0 1 0 0 0 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 250-mA SO8 TPS2046BD TI 0 0 1 0 0 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 500-mA SO8 TPS2052BD TI 0 0 0 1 0 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 250-mA SO8 TPS2056AD TI 0 0 0 0 1 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 1000-mA SO8 TPS2062D TI 0 0 0 0 0 1 0 U1 IC, Dual Power-distribution switch, 5.5V, 1000-mA SO8 TPS2062D-1 TI 0 0 0 0 0 0 1 U1 IC, Dual Power-distribution switch, 5.5V, 1000-mA SO8 TPS2066D TI 1 1 1 1 1 1 1 -- PCB, 2.25 In x 2.225 In × 0.062 In HPA293 Any 4 4 4 4 4 4 4 R1–R4 10.0K Resistor, Chip, 1/10W, 1% 0805 CRCW0805-1002F Vishay
SLVU231A–January 2008–Revised June 2012 Two-Channel, Power-Distribution Switch EVM
Submit Documentation Feedback
Copyright © 2008–2012, Texas Instruments Incorporated
5
Schematics and Bill of Materials
Table 4. TPS20xxEVM-296 Bill of Materials
QTY RefDes Value Description Size Part Number MFR
-001 -002 -003 -004 -005 -006 -007
1 1 1 1 1 1 1 C1 10 μF Capacitor, Ceramic, 10-μF, X7R, 10V, 10% 1206 STD STD 3 3 3 3 3 3 3 C2–C4 0.1 μF Capacitor, Ceramic, 16V, X7R, 10% 0805 STD STD 2 2 2 2 2 2 2 C5, C6 150 μF Capacitor, Tantalum, 150 μF, 10V, 100 mΩ, 10% 7343 (D) B45197A2157K409 Kemet 1 0 0 0 0 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 500-mA MSOP-8 TPS2042BDGN TI 0 1 0 0 0 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 500-mA MSOP-8 TPS2052BDGN TI 0 0 1 0 0 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 1500-mA MSOP-8 TPS2060DGN TI 0 0 0 1 0 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 1000-mA MSOP-8 TPS2062DGN TI 0 0 0 0 1 0 0 U1 IC, Dual Power-distribution switch, 5.5V, 1500-mA MSOP-8 TPS2064DGN TI 0 0 0 0 0 1 0 U1 IC, Dual Power-distribution switch, 5.5V, 1000-mA MSOP-8 TPS2066DGN TI 0 0 0 0 0 0 1 U1 IC, Dual Power-distribution switch, 5.5V, 1000-mA MSOP-8 TPS2066DGN-1 TI 1 1 1 1 1 1 1 -- PCB, 2.25 In × 2.225 In × 0.062 In 2.25 in × HPA296 Any
2.25 in
4 4 4 4 4 4 4 R1–R4 10.0K Resistor, Chip, 1/10W, 1% 0805 CRCW0805-1002F Vishay
www.ti.com
6
Two-Channel, Power-Distribution Switch EVM SLVU231A–January 2008–Revised June 2012
Copyright © 2008–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Loading...
+ 11 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use