Texas Instruments MOC3023, MOC3022, MOC3021, MOC3020 Datasheet
MOC3020 THRU MOC3023
OPTOCOUPLERS/OPTOISOLATORS
SOES025 – OCTOBER 1986 – REVISED OCTOBER 1995
• 250 V Phototriac Driver Output
• Gallium-Arsenide-Diode Infrared Source and
Optically-Coupled Silicon Traic Driver
(Bilateral Switch)
• UL Recognized File Number E65085. . .
MOC3020 – MOC3023 ...PACKAGE
ANODE
CATHODE
NC
(TOP VIEW)
1
2
3
6
5
4
MAIN TERM
TRIAC SUB
MAIN TERM
†
• High Isolation 7500 V Peak. . .
• Output Driver Designed for 220 V ac
• Standard 6-Terminal Plastic DIP
†
Do not connect this terminal
NC – No internal connection
• Directly Interchangeable with
Motorola MOC3020, MOC3021, MOC3022,
and MOC3023
logic diagram
• Direct Replacements for:
– TRW Optron OPI3020, OPI3021,
OPI3022, and OPI3023;
1
– General Instrument MCP3020,
MCP3021, and MCP3022;
2
– General Electric GE3020,
GE3021, GE3022, and GE3023
absolute maximum ratings at 25°C free-air temperature (unless otherwise noted)
Input-to-output peak voltage, 5 s maximum duration, 60 Hz (see Note 1) 7.5 kV. . . . . . . . . . . . . . . . . . . . . . . .
Input diode reverse voltage 3 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input diode forward current, continuous 50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output repetitive peak off-state voltage 400 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output on-state current, total rms value (50-60 Hz, full sine wave):T
Output driver nonrepetitive peak on-state current (t
= 10 ms, duty cycle = 10%, see Figure 7) 1.2 A. . . . . .
w
Continuous power dissipation at (or below) 25°C free-air temperature:
Infrared-emitting diode (see Note 2) 100 mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Phototriac (see Note 3) 300 mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total device (see Note 4) 330 mW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating junction temperature range, T
Storage temperature range, T
–40°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
stg
–40°C to 100°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
J
Lead temperature 1,6 (1/16 inch) from case for 10 seconds 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. Input-to-output peak voltage is the internal device dielectric breakdown rating.
2. Derate linearly to 100°C free-air temperature at the rate of 1.33 mW/°C.
3. Derate linearly to 100°C free-air temperature at the rate of 4 mW/°C.
4. Derate linearly to 100°C free-air temperature at the rate of 4.4 mW/°C.
= 25°C 100 mA. . . . . . . . . . . . . . . . . . .
A
T
= 70°C 50 mA. . . . . . . . . . . . . . . . . . . .
A
6
4
†
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Copyright 1995, Texas Instruments Incorporated
7–1
MOC3020 THRU MOC3023
I
Input trigger current,
Output
V
A
OPTOCOUPLERS/OPTOISOLATORS
SOES025 – OCTOBER 1986 – REVISED OCTOBER 1995
electrical characteristics at 25°C free-air temperature (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
I
R
V
F
I
(DRM)
dv/dt Critical rate of rise of off-state voltage See Figure 1 100 V/µs
dv/dt(c) Critical rate of rise of commutating voltage IO = 15 mA, See Figure 1 0.15 V/µs
FT
V
TM
I
H
NOTE 5: Test voltage must be applied at a rate no higher than 12 V/µs.
Static reverse current VR = 3 V 0.05 100 µA
Static forward voltage IF = 10 mA 1.2 1.5 V
Repetitive off-state current, either direction V
MOC3020
Input trigger current,
either direction
Peak on-state voltage, either direction ITM = 100 mA 1.4 3 V
Holding current, either direction 100 µA
MOC3021
MOC3022
MOC3023 3 5
= 400 V, See Note 5 10 100 nA
(DRM)
15 30
supply voltage = 3
8 15
5 10
PARAMETER MEASUREMENT INFORMATION
m
V
CC
1
2
Input
(see Note A)
NOTE A. The critical rate of rise of off-state voltage, dv/dt, is measured with the input at 0 V. The frequency of Vin is increased until the
phototriac turns on. This frequency is then used to calculate the dv/dt according to the formula:
dvńdt+22πfV
The critical rate of rise of commutating voltage, dv/dt(c), is measured by applying occasional 5-V pulses to the input and increasing
the frequency of Vin until the phototriac stays on (latches) after the input pulse has ceased. With no further input pulses, the
frequency of Vin is then gradually decreased until the phototriac turns off. The frequency at which turn-off occurs may then be used
to calculate the dv/dt(c) according to the formula shown above.
Ǹ
10 kΩ
2N3904
in
6
VI = 30 V rms
R
L
4
7–2
Figure 1. Critical Rate of Rise Test Circuit
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
EMITTING-DIODE TRIGGER CURRENT (NORMALIZED)
vs
FREE-AIR TEMPERATURE
1.4
1.3
1.2
MOC3020 THRU MOC3023
OPTOCOUPLERS/OPTOISOLATORS
SOES025 – OCTOBER 1986 – REVISED OCTOBER 1995
ON-STATE CHARACTERISTICS
800
Output tw = 800 µs
IF = 20 mA
600
f = 60 Hz
TA = 25°C
400
200
1.1
1
0.9
Emitting-Diode Trigger Current (Normalized)
0.8
–50 –25 0 25 50 75 100
TA – Free-Air Temperature – ° C
Figure 2 Figure 3
NONREPETITIVE PEAK ON-STATE CURRENT
3
TA = 25°C
2
0
–200
– Peak On-State Current – mA
–400
TM
I
–600
–800
vs
PULSE DURATION
–3 –2 –1 0 1 2 3
VTM – Peak On-State Voltage – V
1
– Nonrepetitive Peak On-State Current – mA
TSM
I
0
0.01 0.1 1
tw – Pulse Duration – ms
Figure 4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
10 100
7–3
Loading...