Texas Instruments LM258ADGKR, LM258DGKR, LM2904AVQDR, LM2904AVQPWR, LM2904DGKR Schematic [ru]

3 2 1 20 19

9 10 11 12 13

4

5

6

7

8

18

17

16

15

14

NC
2OUT
NC
2IN−
NC

NC

NC

NC

NC

1OUT

NC

NC NC

NC

NC

CC+

V

2IN+

1

2

3

4

8

7

6

5

1IN−
1IN+

GND

V

CC

2OUT
2IN−
2IN+

www.ti.com

Dual Operational Amplifiers

Check for Samples: LM158, LM258, LM258A, LM358, LM358A, LM2904, LM2904V

1

FEATURES

• Wide Supply Ranges
– Single Supply: 3 V to 32 V (26 V for

LM2904)

– Dual Supplies: ±1.5 V to ±16 V (±13 V for

LM2904)

• Low Supply-Current Drain, Independent of
Supply Voltage: 0.7 mA Typ

• Wide Unity Gain Bandwidth: 0.7MHz

• Common-Mode Input Voltage Range Includes
Ground, Allowing Direct Sensing Near Ground

• Low Input Bias and Offset Parameters
– Input Offset Voltage: 3 mV Typ

A Versions: 2 mV Typ
– Input Offset Current: 2 nA Typ
– Input Bias Current: 20 nA Typ

A Versions: 15 nA Typ

• Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage: 32 V (26 V for
LM2904)

• Open-Loop Differential Voltage Gain: 100dB
Typ

• Internal Frequency Compensation

• On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise
Noted. On All Other Products, Production
Processing Does Not Necessarily Include
Testing of All Parameters.

LM158, LM158A . . . JG Package

LM258, LM258A . . . D, DGK, or P Package

LM358 . . . D, DGK, P, PS, or PW Package

LM358A . . . D, DGK, P, or PW Package

LM2904 . . . D, DGK, P, PS, or PW Package

(Top View)

LM158, LM158A, LM258, LM258A

LM358, LM358A, LM2904, LM2904V

SLOS068S –JUNE 1976–REVISED MAY 2013

DESCRIPTION

These devices consist of two independent, high-gain
frequency-compensated operational amplifiers
designed to operate from a single supply over a wide
range of voltages. Operation from split supplies also
is possible if the difference between the two supplies
is 3 V to 32 V (3 V to 26 V for the LM2904), and V
is at least 1.5 V more positive than the input
common-mode voltage. The low supply-current drain
is independent of the magnitude of the supply
voltage.

Applications include transducer amplifiers, dc
amplification blocks, and all the conventional
operational amplifier circuits that now can be
implemented more easily in single-supply-voltage
systems. For example, these devices can be
operated directly from the standard 5-V supply used
in digital systems and easily can provide the required
interface electronics without additional ±5-V supplies.

LM158, LM158A . . . FK Package

(Top View)

CC

1

PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

NC − No internal connection

Copyright © 1976–2013, Texas Instruments Incorporated

V

CC+

OUT

GND (or V

CC−

)

To Other Amplifier

≈6- Aµ

Current

Regulator

≈6- Aµ

Current

Regulator

≈100- Aµ

Current

Regulator

≈50- Aµ

Current

Regulator

Epi-FET
Diodes
Resistors
Transistors
Capacitors

COMPONENT COUNT

1
2
7

51

2

OUT

+

−

LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V

SLOS068S –JUNE 1976–REVISED MAY 2013

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

Schematic (Each Amplifier)

www.ti.com

Symbol (Each Amplifier)

2 Submit Documentation Feedback Copyright © 1976–2013, Texas Instruments Incorporated

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

LM158, LM158A, LM258, LM258A

LM358, LM358A, LM2904, LM2904V

www.ti.com

Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

Supply voltage, V
Differential input voltage, V
Input voltage, VI(either input) –0.3 to 32 –0.3 to 26 V
Duration of output short circuit (one amplifier) to ground at (or below) TA= 25°C, VCC≤ 15 V

Package thermal impedance, θ

Package thermal impedance, θ

Operating free air temperature range. T

Operating virtual junction temperature, T
Case temperature for 60 seconds FK package 260 °C
Lead temperature 1,6 mm (1/16 inch) from case for 60

seconds
Storage temperature range, T

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values (except differential voltages and VCCspecified for the measurement of IOS) are with respect to the network GND.
(3) Differential voltages are at IN+, with respect to IN−.
(4) Short circuits from outputs to VCCcan cause excessive heating and eventual destruction.
(5) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient

temperature is PD= (TJ(max) – TA)/θJA. Operating at the absolute maximum TJof 150°C can affect reliability.
(6) Maximum power dissipation is a function of TJ(max), θJC, and TC. The maximum allowable power dissipation at any allowable case

temperature is PD= (TJ(max) – TC)/θJC. Operating at the absolute maximum TJof 150°C can affect reliability.
(7) The package thermal impedance is calculated in accordance with MIL-STD-883.

CC

(2)

(3)

ID

D package 97 97
DGK package 172 172

(4)(5)

JA

P package 85 85 °C/W
PS package 95 95
PW package 149 149
D package 72.2

(6)(7)

JC

FK package 5.61 °C/W
JG package 14.5
LM158, LM158A –55 to 125
LM258, LM258A –25 to 85

A

LM358, LM358A 0 to 70
LM2904 –40 to 125 –40 to 125

J

JG package 300 300 °C

stg

(1)

SLOS068S –JUNE 1976–REVISED MAY 2013

LM158,

LM158A

LM258,

LM258A LM2904 UNIT

LM358,

LM358A

LM2904V

±16 or 32 ±13 or 26 V

±32 ±26 V

(4)

Unlimited Unlimited

150 150 °C

–65 to 150 –65 to 150 °C

°C

Copyright © 1976–2013, Texas Instruments Incorporated Submit Documentation Feedback 3

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V

SLOS068S –JUNE 1976–REVISED MAY 2013

Electrical Characteristics

at specified free-air temperature, VCC= 5 V (unless otherwise noted)

PARAMETER TEST CONDITIONS

V

IO

αV

I

IO

αI

IO

I

IB

Input offset voltage mV

Average temperature coefficient of

IO

input offset voltage

Input offset current VO= 1.4 V nA

Average temperature coefficient of
input offset current

Input bias current VO= 1.4 V nA

VCC= 5 V to MAX, VIC= V
VO= 1.4 V

(1)

min,

ICR

(2)

T

A

25°C 3 5 3 7

Full range 7 9
Full range 7 7 µV/°C

25°C 2 30 2 50

Full range 100 150
Full range 10 10 pA/°C

25°C –20 –150 –20 –250

Full range –300 –500

25°C

V

ICR

Common-mode input voltage range VCC= 5 V to MAX V

Full range

RL≥ 2 kΩ 25°C VCC– 1.5 VCC– 1.5

V

OH

V

OL

A

VD

High-level output voltage V

Low-level output voltage RL≤ 10 kΩ Full range 5 20 5 20 mV

Large-signal differential voltage
amplification

CMRR Common-mode rejection ratio 25°C 70 80 65 80 dB

k

SVR

Supply-voltage rejection ratio
(ΔVDD/ΔVIO)

RL≥ 10 kΩ 25°C

VCC= MAX

VCC= 15 V 25°C 50 100 25 100
VO= 1 V to 11 V,

RL≥ 2 kΩ
VCC= 5 V to MAX,

VIC= V

ICR(min)

RL= 2 kΩ Full range 26 26
RL≥ 10 kΩ Full range 27 28 27 28

Full range 25 15

VCC= 5 V to MAX 25°C 65 100 65 100 dB

VO1/ VO2Crosstalk attenuation f = 1 kHz to 20 kHz 25°C 120 120 dB

VCC= 15 V, 25°C –20 –30 –20 –30
VID= 1 V, Source
VO= 0

I

O

Output current VCC= 15 V, 25°C 10 20 10 20

VID= –1 V, Sink
VO= 15 V

Full range –10 –10

Full range 5 5

VID= –1 V, VO= 200 mV 25°C 12 30 12 30 μA

I

OS

Short-circuit output current 25°C ±40 ±60 ±40 ±60 mA

VCCat 5 V, VO= 0,
GND at –5 V

VO= 2.5 V, No load Full range 0.7 1.2 0.7 1.2

I

CC

Supply current (two amplifiers) mA

VCC= MAX, VO= 0.5 VCC,
No load

Full range 1 2 1 2

(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX

VCCfor testing purposes is 26 V for LM2902 and 30 V for the others.
(2) Full range is –55°C to 125°C for LM158, –25°C to 85°C for LM258, and 0°C to 70°C for LM358, and –40°C to 125°C for LM2904 .
(3) All typical values are at TA= 25°C

LM158 LM258 LM358

MIN TYP

(3)

MAX MIN TYP

0 to 0 to

VCC– 1.5 VCC– 1.5

0 to 0 to

VCC– 2 VCC– 2

(3)

www.ti.com

UNIT

MAX

V/mV

mA

4 Submit Documentation Feedback Copyright © 1976–2013, Texas Instruments Incorporated

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

LM158, LM158A, LM258, LM258A

LM358, LM358A, LM2904, LM2904V

www.ti.com

Electrical Characteristics

at specified free-air temperature, VCC= 5 V (unless otherwise noted)

PARAMETER TEST CONDITIONS

VCC= 5 V to MAX,

V

IO

αV

IO

I

IO

αI

IO

I

IB

V

ICR

Input offset voltage VIC= V

VO= 1.4 V

Average temperature coefficient of input
offset voltage

, mV

ICR(min)

Input offset current VO= 1.4 V nA

Average temperature coefficient of input
offset current

Input bias current VO= 1.4 V nA

Common-mode input voltage range VCC= 5 V to MAX V

RL≥ 10 kΩ 25°C VCC− 1.5
VCC= MAX,

V

OH

V

OL

High-level output voltage RL≥ 10 kΩ Full range 23 24 V

Low-level output voltage RL≤ 10 kΩ Full range 5 20 mV

Non-V device

VCC= MAX
V-suffix device

VCC= 15 V, 25°C 25 100

A

VD

CMRR Common-mode rejection ratio dB

k

SVR

VO1/ V

Large-signal differential voltage amplification VO= 1 V to 11 V, V/mV

RL≥ 2 kΩ
VCC= 5V to MAX,

VIC= V

ICR(min)

Supply-voltage rejection ratio
(ΔVCC/ΔVIO)

Crosstalk attenuation f = 1 kHz to 20 kHz 25°C 120 dB

O2

VCC= 5 V to MAX 25°C 65 100 dB

VCC= 15 V, 25°C –20 –30
VID= 1 V, Source
VO= 0

I

O

Output current

VCC= 15 V, 25°C 10 20
VID= –1 V, Sink
VO= 15 V

VID= –1 V, VO= 200 mV μA

I

OS

I

CC

Short-circuit output current VCCat 5 V, VO= 0, GND at −5 V 25°C ±40 ±60 mA

Supply current (four amplifiers) mA

VO= 2.5 V, No load Full range 0.7 1.2
VCC= MAX, VO= 0.5 VCC, No load Full range 1 2

(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX

VCCfor testing purposes is 26 V for LM2902 and 32 V for LM2902V.
(2) Full range is –55°C to 125°C for LM158, –25°C to 85°C for LM258, 0°C to 70°C for LM358, and –40°C to 125°C for LM2904.
(3) All typical values are at TA= 25°C.

(1)

Non-A-suffix
devices

A-suffix devices

T

A

25°C 3 7

Full range 10

25°C 1 2

Full range 4
Full range 7 μV/°C

Non-V device

V-suffix device

25°C 2 50

Full range 300

25°C 2 50

Full range 150
Full range 10 pA/°C

25°C –20 –250

Full range –500

25°C

Full range

RL= 2 kΩ Full range 22

RL= 2 kΩ Full range 26
RL≥ 10 kΩ Full range 27 28

Full range 15

Non-V device 25°C 50 80
V-suffix device 25°C 65 80

Full range –10

Full range 5

Non-V device 25°C 30
V-suffix device 25°C 12 40

SLOS068S –JUNE 1976–REVISED MAY 2013

(2)

MIN TYP

0 to

VCC– 1.5

0 to

VCC– 2

LM2904

(3)

MAX

UNIT

mA

Copyright © 1976–2013, Texas Instruments Incorporated Submit Documentation Feedback 5

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V

SLOS068S –JUNE 1976–REVISED MAY 2013

Electrical Characteristics

at specified free-air temperature, VCC= 5 V (unless otherwise noted)

PARAMETER TEST CONDITIONS

(1)

(1)

T

A

VCC= 5 V to 30 V, 25°C 2 2 3

V

IO

αV

IO

I

IO

αI

IO

I

IB

V

ICR

V

OH

V

OL

A

VD

CMRR 25°C 70 80 70 80 dB

k

SVR

VO1/ V

Input offset voltage VIC= V

VO= 1.4 V

Average
temperature
coefficient of input
offset voltage

Input offset current VO= 1.4 V nA

Average
temperature
coefficient of input
offset current

Input bias current VO= 1.4 V nA

Common-mode
input voltage range

High-level output
voltage

Low-level output
voltage

Large-signal 25°C 50 100 50 100
differential voltage V/mV
amplification

Common-mode
rejection ratio

Supply-voltage
rejection ratio

VCC= 30 V V

RL≥ 2 kΩ 25°C VCC– 1.5 VCC– 1.5

VCC= 30 V

RL≤ 10 kΩ Full range 5 20 5 20 mV

VCC= 15 V, VO= 1 V to 11 V,
RL≥ 2 kΩ

(ΔVD/ΔVIO)
Crosstalk

O2

attenuation

f = 1 kHz to 20 kHz 25°C 120 120 dB

, mV

ICR(min)

Full range 4 4

Full range 7 15

25°C 2 10 2 15

Full range 30 30

Full range 10 200 10 200 pA/°C

25°C –15 –50 –15 –80

Full range –100 –100

25°C

Full range

RL= 2kΩ Full range 26 26 V
RL≥ 10kΩ Full range 27 28 27 28

Full range 25 25

25°C 65 100 65 100 dB

VCC= 15 V, 25°C –20 –30 –60 –20 –30 −60
VID= 1 V, Source
VO= 0

I

O

Output current VCC= 15 V, 25°C 10 20 10 20

VID= –1 V, Sink
VO= 15 V

Full range –10 –10

Full range 5 5

VID= −1 V, VO= 200 mV 25°C 12 30 12 30 μA

I

OS

I

CC

Short-circuit output
current

Supply current (four
amplifiers)

VCCat 5 V, GND at –5 V,
VO= 0

25°C ±40 ±60 ±40 ±60 mA

VO= 2.5 V, No load Full range 0.7 1.2 0.7 1.2
VCC= MAX V, VO= 0.5 V,

No load

Full range 1 2 1 2

(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX

VCCfor testing purposes is 26 V for LM2904 and 30 V for others.
(2) All typical values are at TA= 25°C.
(3) On products compliant to MIL-PRF-38535, this parameter is not production tested.

LM158A LM258A

MIN TYP

(2)

MAX MIN TYP

(3)

0 to 0to

VCC– 1.5 VCC– 1.5

0 to 0to

VCC– 2 VCC– 2

(2)

7 15 µA/°C

www.ti.com

MAX

UNIT

mA

mA

6 Submit Documentation Feedback Copyright © 1976–2013, Texas Instruments Incorporated

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

LM158, LM158A, LM258, LM258A

LM358, LM358A, LM2904, LM2904V

www.ti.com

Electrical Characteristics

at specified free-air temperature, VCC= 5 V (unless otherwise noted)

PARAMETER TEST CONDITIONS

V

IO

αV

IO

I

IO

αI

IO

I

IB

V

ICR

V

OH

V

OL

A

VD

CMRR 25°C 65 80 dB

k

SVR

VO1/ V

O2

I

O

I

OS

I

CC

Input offset voltage VIC= V

Average temperature
coefficient of input offset Full range 7 20 µA/°C
voltage

Input offset current VO= 1.4 V nA

Average temperature
coefficient of input offset Full range 10 300 pA/°C
current

Input bias current VO= 1.4 V nA

Common-mode input
voltage range

High-level output voltage RL= 2kΩ Full range 26 V

Low-level output voltage RL≤ 10 kΩ Full range 5 20 mV
Large-signal differential

voltage amplification
Common-mode rejection

ratio
Supply-voltage rejection

ratio
(ΔVDD/ΔVIO)

Crosstalk attenuation f = 1 kHz to 20 kHz 25°C 120 dB

Output current VCC= 15 V, 25°C 10 20

Short-circuit output current 25°C ±40 ±60 mA

Supply current (four
amplifiers)

VCC= 5 V to 30 V, 25°C 2 3

VO= 1.4 V

VCC= 30 V V

RL≥ 2 kΩ 25°C VCC– 1.5

VCC= 30 V

VCC= 15 V, VO= 1 V to 11 V,
RL≥ 2 kΩ

VCC= 15 V, 25°C –20 –30 −60
VID= 1 V, Source
VO= 0

VID= –1 V, Sink
VO= 15 V

VID= –1 V, VO= 200 mV 25°C 30 μA
VCCat 5 V, GND at –5 V,

VO= 0
VO= 2.5 V, No load Full range 0.7 1.2
VCC= MAX V, VO= 0.5 V,

No load

, mV

ICR(min)

(1)

RL≥ 10kΩ Full range 27 28

(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX

VCCfor testing purposes is 26 V for LM2904 and 30 V for others.
(2) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX

VCCfor testing purposes is 26 V for LM2904 and 30 V for others.
(3) All typical values are at TA= 25°C.

(2)

T

A

Full range 5

25°C 2 30

Full range 75

25°C –15 –100

Full range –200

25°C

Full range

25°C 25 100

Full range 15

25°C 65 100 dB

Full range –10

Full range 5

Full range 1 2

SLOS068S –JUNE 1976–REVISED MAY 2013

LM358A

MIN TYP

0 to

VCC– 1.5

0 to

VCC– 2

(3)

MAX

UNIT

V/mV

mA

mA

Operating Conditions, VCC= ±15 V, TA= 25°C

PARAMETER TEST CONDITIONS TYP UNIT

SR Slew rate at unity gain RL= 1 MΩ, CL= 30 pF, VI= ±10 V (see Figure 1) 0.3 V/μs
B

Unity-gain bandwidth RL= 1 MΩ, CL= 20 pF (see Figure 1Figure 1) 0.7 MHz

1

V

Equivalent input noise voltage RS= 100 Ω, VI= 0 V, f = 1 kHz (see Figure 2) 40 nV/√Hz

n

Copyright © 1976–2013, Texas Instruments Incorporated Submit Documentation Feedback 7

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

V

O

−

+

100 Ω

V

CC+

V

CC−

RS

900 Ω

VI= 0 V

V

O

−

+

R

L

C

L

V

I

V

CC+

V

CC−

LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V

SLOS068S –JUNE 1976–REVISED MAY 2013

Figure 1. Unity-Gain Amplifier

www.ti.com

Figure 2. Noise-Test Circuit

8 Submit Documentation Feedback Copyright © 1976–2013, Texas Instruments Incorporated

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

0

20

40

60

80

100

120

140

1 10 100 1,000 10,000 100,000 1,000,000

Voltage Gain (dB)

Frequency (Hz)

Open Loop Frequency Response

0

20

40

60

80

100

120

100 1,000 10,000 100,000 1,000,000

dB

Frequency (Hz)

Common Mode Rejection Ratio

(differential gain / common mode gain)

0.2

0.22

0.24

0.26

0.28

0.3

0.32

0.34

0.36

0 5 10 15 20 25 30

Supply Current in mA

Supply Voltage

Supply Current (ICC)

-55C

0C

125C

0

20

40

60

80

100

120

140

160

0 5 10 15 20 25 30 35 40

Avol Voltage Gain (dB)

V+ Supply Voltage (Vdc)

Voltage Gain

RL=20K

RL=2K

0

5

10

15

0 5 10 15

+/-Vin Input Voltage (+/-Vdc)

V+ OR V- Power Supply Voltage (+/-Vdc)

Input Voltage Range

Negative

Positive

0

2

4

6

8

10

12

14

16

18

20

-55 -35 -15 5 25 45 65 85 105 125

Ib Input Current (nAdc)

Ta Temperature (C)

Input Current

5Vdc

15Vdc

30Vdc

www.ti.com

LM158, LM158A, LM258, LM258A

LM358, LM358A, LM2904, LM2904V

SLOS068S –JUNE 1976–REVISED MAY 2013

Typical Characteristics

Figure 3. Figure 4.

Copyright © 1976–2013, Texas Instruments Incorporated Submit Documentation Feedback 9

Figure 7. Min & Max Gain Over Temperature Range Figure 8.

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

Figure 5. Figure 6.

0.01

0.1

1

10

0.001 0.01 0.1 1 10 100

Vo Output Voltage (Vdc)

Io Output Sink Current (mAdc)

Output Characteristics Current Sinking

5Vdc

15Vdc

30Vdc

0

10

20

30

40

50

60

70

80

90

-55 -35 -15 5 25 45 65 85 105 125

Io+ Output Current (mAdc)

Ta Temperature

Current Limiting

0

2.5

5

7.5

10

12.5

15

17.5

20

1 10 100 1000

Vo Output Swing (Vp-p)

f Frequency (kHz)

Large Signal Frequency Response

1

2

3

4

5

6

7

8

0.001 0.01 0.1 1 10 100

Vo Output Voltage (Vdc) relative to Vcc

Io Output Sink Current (mAdc)

Output Characteristics Current Sourcing

0

1

2

3

4

0 5 10 15 20 25 30 35 40

Vo Output Voltage (V)

t TIME (uS)

Voltage Follower Pulse Response

250

300

350

400

450

500

0 1 2 3 4 5 6 7 8

e0 Output Voltage (mV)

t TIME (uS)

Voltage Follower Pulse Response (Small Signal)

LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V

SLOS068S –JUNE 1976–REVISED MAY 2013

Typical Characteristics (continued)

Figure 9. Figure 10.

www.ti.com

Figure 11. Figure 12.

10 Submit Documentation Feedback Copyright © 1976–2013, Texas Instruments Incorporated

Figure 13. Figure 14.

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

0

20

40

60

80

100

120

140

160

0 5 10 15 20 25 30

Avol Voltage Gain (dB)

V+ Supply Voltage (Vdc)

Voltage Gain (LM2902 Only)

RL=20K

RL=2K

0.00

12.50

25.00

37.50

50.00

0 5 10 15 20 25 30

Iin Input Current (nAdc)

V+ Supply Voltage (Vdc)

Input Current (LM2902 Only)

www.ti.com

LM158, LM158A, LM258, LM258A

LM358, LM358A, LM2904, LM2904V

SLOS068S –JUNE 1976–REVISED MAY 2013

Typical Characteristics (continued)

Figure 15. Figure 16.

Copyright © 1976–2013, Texas Instruments Incorporated Submit Documentation Feedback 11

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904V

SLOS068S –JUNE 1976–REVISED MAY 2013

REVISION HISTORY

Changes from Revision R (July 2010) to Revision S Page

• Converted this data sheet from the QS format to DocZone using the PDF on the web. ..................................................... 1

• Updated Features. ................................................................................................................................................................ 1

• Added ESD warning. ............................................................................................................................................................ 2

• Deleted Ordering Information table. ...................................................................................................................................... 2

• Added Package thermal impedance information, θJCfor D package. .................................................................................. 3

• Added Typical Characteristics Section ................................................................................................................................. 9

www.ti.com

12 Submit Documentation Feedback Copyright © 1976–2013, Texas Instruments Incorporated

Product Folder Links: LM158 LM258 LM258A LM358 LM358A LM2904 LM2904V

PACKAGE OPTION ADDENDUM

www.ti.com

PACKAGING INFORMATION

Orderable Device Status

5962-87710012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-

5962-8771001PA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 8771001PA

5962-87710022A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-

5962-8771002PA ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 8771002PA

LM158AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-

LM158AJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 LM158AJG

LM158AJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 8771002PA

LM158FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 5962-

LM158JG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 LM158JG

Package Type Package

(1)

Drawing

Pins Package

Qty

Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

9-Mar-2014

Samples

(4/5)

87710012A
LM158FKB

LM158

87710022A
LM158AFKB

LM158A

87710022A
LM158AFKB

LM158A

87710012A
LM158FKB

LM158JGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type -55 to 125 8771001PA

LM158

LM258AD ACTIVE SOIC D 8 75 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258A

& no Sb/Br)

LM258ADE4 ACTIVE SOIC D 8 75 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258A

& no Sb/Br)

LM258ADG4 ACTIVE SOIC D 8 75 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258A

& no Sb/Br)

LM258ADGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS

& no Sb/Br)

LM258ADGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS

& no Sb/Br)

LM258ADR ACTIVE SOIC D 8 2500 Green (RoHS

CU NIPDAU |

CU NIPDAUAG

Level-1-260C-UNLIM -25 to 85 (M3L ~ M3P ~ M3S ~

M3U)

CU NIPDAU Level-1-260C-UNLIM -25 to 85 (M3L ~ M3P ~ M3S ~

M3U)

CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 LM258A

& no Sb/Br)

Addendum-Page 1

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device Status

Package Type Package

(1)

Drawing

Pins Package

Qty

LM258ADRE4 ACTIVE SOIC D 8 2500 Green (RoHS

LM258ADRG4 ACTIVE SOIC D 8 2500 Green (RoHS

LM258AP ACTIVE PDIP P 8 50 Pb-Free

LM258APE4 ACTIVE PDIP P 8 50 Pb-Free

LM258D ACTIVE SOIC D 8 75 Green (RoHS

LM258DE4 ACTIVE SOIC D 8 75 Green (RoHS

LM258DG4 ACTIVE SOIC D 8 75 Green (RoHS

LM258DGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS

LM258DGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS

LM258DR ACTIVE SOIC D 8 2500 Green (RoHS

LM258DRE4 ACTIVE SOIC D 8 Green (RoHS

LM258DRG3 ACTIVE SOIC D 8 2500 Green (RoHS

LM258DRG4 ACTIVE SOIC D 8 2500 Green (RoHS

LM258P ACTIVE PDIP P 8 50 Pb-Free

LM258PE4 ACTIVE PDIP P 8 50 Pb-Free

LM2904AVQDR ACTIVE SOIC D 8 2500 Green (RoHS

LM2904AVQDRG4 ACTIVE SOIC D 8 2500 Green (RoHS

LM2904AVQPWR ACTIVE TSSOP PW 8 2000 Green (RoHS

Eco Plan

(2)

& no Sb/Br)

& no Sb/Br)

(RoHS)

(RoHS)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

(RoHS)

(RoHS)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258A

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258A

CU NIPDAU N / A for Pkg Type -25 to 85 LM258AP

CU NIPDAU N / A for Pkg Type -25 to 85 LM258AP

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258

CU NIPDAU |

CU NIPDAUAG

Level-1-260C-UNLIM -25 to 85 (M2L ~ M2P ~ M2S ~

M2U)

CU NIPDAU Level-1-260C-UNLIM -25 to 85 (M2L ~ M2P ~ M2S ~

M2U)

CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 LM258

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258

CU SN Level-1-260C-UNLIM -25 to 85 LM258

CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM258

CU NIPDAU N / A for Pkg Type -25 to 85 LM258P

CU NIPDAU N / A for Pkg Type -25 to 85 LM258P

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904AV

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904AV

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904AV

9-Mar-2014

Samples

(4/5)

Addendum-Page 2

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device Status

Package Type Package

(1)

Drawing

Pins Package

Qty

LM2904AVQPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS

LM2904D ACTIVE SOIC D 8 75 Green (RoHS

LM2904DE4 ACTIVE SOIC D 8 75 Green (RoHS

LM2904DG4 ACTIVE SOIC D 8 75 Green (RoHS

LM2904DGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS

LM2904DGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS

LM2904DR ACTIVE SOIC D 8 2500 Green (RoHS

LM2904DRE4 ACTIVE SOIC D 8 2500 Green (RoHS

LM2904DRG3 ACTIVE SOIC D 8 2500 Green (RoHS

LM2904DRG4 ACTIVE SOIC D 8 2500 Green (RoHS

LM2904P ACTIVE PDIP P 8 50 Pb-Free

LM2904PE4 ACTIVE PDIP P 8 50 Pb-Free

LM2904PSR ACTIVE SO PS 8 2000 Green (RoHS

LM2904PSRE4 ACTIVE SO PS 8 2000 Green (RoHS

LM2904PSRG4 ACTIVE SO PS 8 2000 Green (RoHS

LM2904PW ACTIVE TSSOP PW 8 150 Green (RoHS

LM2904PWE4 ACTIVE TSSOP PW 8 150 Green (RoHS

LM2904PWG4 ACTIVE TSSOP PW 8 150 Green (RoHS

Eco Plan

(2)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

(RoHS)

(RoHS)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904AV

CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904

CU NIPDAU |

CU NIPDAUAG

Level-1-260C-UNLIM -40 to 125 (MBL ~ MBP ~ MBS ~

MBU)

CU NIPDAU Level-1-260C-UNLIM -40 to 125 (MBL ~ MBP ~ MBS ~

MBU)

CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 LM2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904

CU SN Level-1-260C-UNLIM -40 to 125 LM2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2904

CU NIPDAU N / A for Pkg Type -40 to 125 LM2904P

CU NIPDAU N / A for Pkg Type -40 to 125 LM2904P

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904

9-Mar-2014

Samples

(4/5)

Addendum-Page 3

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device Status

Package Type Package

(1)

Drawing

Pins Package

Qty

LM2904PWLE OBSOLETE TSSOP PW 8 TBD Call TI Call TI -40 to 125

LM2904PWR ACTIVE TSSOP PW 8 2000 Green (RoHS

LM2904PWRG3 ACTIVE TSSOP PW 8 2000 Green (RoHS

LM2904QD OBSOLETE SOIC D 8 TBD Call TI Call TI -40 to 125

LM2904QDR ACTIVE SOIC D 8 2500 Green (RoHS

LM2904QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS

LM2904QP OBSOLETE PDIP P 8 TBD Call TI Call TI -40 to 125

LM2904VQDR ACTIVE SOIC D 8 2500 Green (RoHS

LM2904VQDRG4 ACTIVE SOIC D 8 2500 Green (RoHS

LM2904VQPWR ACTIVE TSSOP PW 8 2000 Green (RoHS

LM2904VQPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS

LM358AD ACTIVE SOIC D 8 75 Green (RoHS

LM358ADE4 ACTIVE SOIC D 8 75 Green (RoHS

LM358ADG4 ACTIVE SOIC D 8 75 Green (RoHS

LM358ADGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS

LM358ADGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS

LM358ADR ACTIVE SOIC D 8 2500 Green (RoHS

LM358ADRE4 ACTIVE SOIC D 8 2500 Green (RoHS

LM358ADRG4 ACTIVE SOIC D 8 2500 Green (RoHS

Eco Plan

(2)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 L2904

CU SN Level-1-260C-UNLIM -40 to 125 L2904

CU NIPDAU Level-1-260C-UNLIM -40 to 125 2904Q1

CU NIPDAU Level-1-260C-UNLIM -40 to 125 2904Q1

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904V

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904V

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904V

CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2904V

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A

CU NIPDAU |

CU NIPDAUAG

Level-1-260C-UNLIM 0 to 70 (M6L ~ M6P ~ M6S ~

M6U)

CU NIPDAU Level-1-260C-UNLIM 0 to 70 (M6L ~ M6P ~ M6S ~

M6U)

CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 LM358A

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358A

9-Mar-2014

Samples

(4/5)

Addendum-Page 4

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device Status

LM358AP ACTIVE PDIP P 8 50 Pb-Free

LM358APE4 ACTIVE PDIP P 8 50 Pb-Free

LM358APW ACTIVE TSSOP PW 8 150 Green (RoHS

LM358APWE4 ACTIVE TSSOP PW 8 150 Green (RoHS

LM358APWG4 ACTIVE TSSOP PW 8 150 Green (RoHS

LM358APWR ACTIVE TSSOP PW 8 2000 Green (RoHS

LM358APWRE4 ACTIVE TSSOP PW 8 2000 Green (RoHS

LM358APWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS

LM358D ACTIVE SOIC D 8 75 Green (RoHS

LM358DE4 ACTIVE SOIC D 8 75 Green (RoHS

LM358DG4 ACTIVE SOIC D 8 75 Green (RoHS

LM358DGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS

LM358DGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS

LM358DR ACTIVE SOIC D 8 2500 Green (RoHS

LM358DRE4 ACTIVE SOIC D 8 2500 Green (RoHS

LM358DRG3 ACTIVE SOIC D 8 2500 Green (RoHS

LM358DRG4 ACTIVE SOIC D 8 2500 Green (RoHS

LM358P ACTIVE PDIP P 8 50 Green (RoHS

Package Type Package

(1)

Drawing

Pins Package

Qty

Eco Plan

(2)

(RoHS)

(RoHS)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

& no Sb/Br)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

CU NIPDAU N / A for Pkg Type 0 to 70 LM358AP

CU NIPDAU N / A for Pkg Type 0 to 70 LM358AP

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358A

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358A

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358A

CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 L358A

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358A

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358A

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358

CU NIPDAU |

CU NIPDAUAG

Level-1-260C-UNLIM 0 to 70 (M5L ~ M5P ~ M5S ~

M5U)

CU NIPDAU Level-1-260C-UNLIM 0 to 70 (M5L ~ M5P ~ M5S ~

M5U)

CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 LM358

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358

CU SN Level-1-260C-UNLIM 0 to 70 LM358

CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM358

CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 LM358P

9-Mar-2014

Samples

(4/5)

Addendum-Page 5

PACKAGE OPTION ADDENDUM

www.ti.com

Orderable Device Status

LM358PE3 ACTIVE PDIP P 8 50 Pb-Free

Package Type Package

(1)

Drawing

Pins Package

Qty

Eco Plan

(2)

Lead/Ball Finish

(6)

MSL Peak Temp

(3)

Op Temp (°C) Device Marking

CU SN N / A for Pkg Type 0 to 70 LM358P

(RoHS)

LM358PE4 ACTIVE PDIP P 8 50 Pb-Free

CU NIPDAU N / A for Pkg Type 0 to 70 LM358P

(RoHS)

LM358PSLE OBSOLETE SO PS 8 TBD Call TI Call TI 0 to 70

LM358PSR ACTIVE SO PS 8 2000 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

LM358PSRE4 ACTIVE SO PS 8 2000 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

LM358PSRG4 ACTIVE SO PS 8 2000 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

LM358PW ACTIVE TSSOP PW 8 150 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

LM358PWE4 ACTIVE TSSOP PW 8 150 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

LM358PWG4 ACTIVE TSSOP PW 8 150 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

LM358PWLE OBSOLETE TSSOP PW 8 TBD Call TI Call TI 0 to 70

LM358PWR ACTIVE TSSOP PW 8 2000 Green (RoHS

CU NIPDAU | CU SN Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

LM358PWRE4 ACTIVE TSSOP PW 8 2000 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

LM358PWRG3 ACTIVE TSSOP PW 8 2000 Green (RoHS

CU SN Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

LM358PWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS

CU NIPDAU Level-1-260C-UNLIM 0 to 70 L358

& no Sb/Br)

(1)

The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.

(2)

Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.

9-Mar-2014

Samples

(4/5)

Addendum-Page 6

PACKAGE OPTION ADDENDUM

www.ti.com

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)

(3)

MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4)

There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5)

Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.

(6)

Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF LM258A, LM2904 :

Automotive: LM2904-Q1

•

9-Mar-2014

Enhanced Product: LM258A-EP

•

NOTE: Qualified Version Definitions:

Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects

•

Enhanced Product - Supports Defense, Aerospace and Medical Applications

•

Addendum-Page 7

PACKAGE MATERIALS INFORMATION

www.ti.com 11-Feb-2014

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package

Type

LM258ADGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
LM258ADGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1

LM258ADR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

LM258ADR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM258ADRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM258ADRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

LM258DGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
LM258DGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1

LM258DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM258DR SOIC D 8 2500 330.0 12.8 6.4 5.2 2.1 8.0 12.0 Q1

LM258DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM258DRG3 SOIC D 8 2500 330.0 12.8 6.4 5.2 2.1 8.0 12.0 Q1
LM258DRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

LM2904AVQPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1

LM2904AVQPWRG4 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1

LM2904DGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
LM2904DGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1

LM2904DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

Package
Drawing

Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

A0

(mm)B0(mm)K0(mm)P1(mm)W(mm)

Pin1

Quadrant

Pack Materials-Page 1

PACKAGE MATERIALS INFORMATION

www.ti.com 11-Feb-2014

Device Package

Type

LM2904DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM2904DRG3 SOIC D 8 2500 330.0 12.8 6.4 5.2 2.1 8.0 12.0 Q1
LM2904DRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM2904DRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

LM2904PSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1

LM2904PWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1

LM2904PWRG3 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1

LM2904QDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

LM2904VQPWRG4 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1

LM358ADGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
LM358ADGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1

LM358ADR SOIC D 8 2500 330.0 12.8 6.4 5.2 2.1 8.0 12.0 Q1

LM358ADR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM358ADRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM358ADRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

LM358APWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1
LM358APWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1
LM358DGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1
LM358DGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1

LM358DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

LM358DR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM358DRG3 SOIC D 8 2500 330.0 12.8 6.4 5.2 2.1 8.0 12.0 Q1
LM358DRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
LM358DRG4 SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1

LM358PSR SO PS 8 2000 330.0 16.4 8.2 6.6 2.5 12.0 16.0 Q1

LM358PWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1

LM358PWRG3 TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1

Package
Drawing

Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

A0

(mm)B0(mm)K0(mm)P1(mm)W(mm)

Pin1

Quadrant

Pack Materials-Page 2

PACKAGE MATERIALS INFORMATION

www.ti.com 11-Feb-2014

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

LM258ADGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM258ADGKR VSSOP DGK 8 2500 332.0 358.0 35.0

LM258ADR SOIC D 8 2500 367.0 367.0 35.0

LM258ADR SOIC D 8 2500 340.5 338.1 20.6
LM258ADRG4 SOIC D 8 2500 367.0 367.0 35.0
LM258ADRG4 SOIC D 8 2500 340.5 338.1 20.6

LM258DGKR VSSOP DGK 8 2500 332.0 358.0 35.0
LM258DGKR VSSOP DGK 8 2500 364.0 364.0 27.0

LM258DR SOIC D 8 2500 367.0 367.0 35.0
LM258DR SOIC D 8 2500 364.0 364.0 27.0

LM258DR SOIC D 8 2500 340.5 338.1 20.6
LM258DRG3 SOIC D 8 2500 364.0 364.0 27.0
LM258DRG4 SOIC D 8 2500 367.0 367.0 35.0

LM2904AVQPWR TSSOP PW 8 2000 367.0 367.0 35.0

LM2904AVQPWRG4 TSSOP PW 8 2000 367.0 367.0 35.0

LM2904DGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM2904DGKR VSSOP DGK 8 2500 332.0 358.0 35.0

LM2904DR SOIC D 8 2500 340.5 338.1 20.6
LM2904DR SOIC D 8 2500 367.0 367.0 35.0

LM2904DRG3 SOIC D 8 2500 364.0 364.0 27.0

Pack Materials-Page 3

PACKAGE MATERIALS INFORMATION

www.ti.com 11-Feb-2014

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

LM2904DRG4 SOIC D 8 2500 340.5 338.1 20.6
LM2904DRG4 SOIC D 8 2500 367.0 367.0 35.0

LM2904PSR SO PS 8 2000 367.0 367.0 38.0

LM2904PWR TSSOP PW 8 2000 364.0 364.0 27.0

LM2904PWRG3 TSSOP PW 8 2000 364.0 364.0 27.0

LM2904QDR SOIC D 8 2500 367.0 367.0 35.0

LM2904VQPWRG4 TSSOP PW 8 2000 367.0 367.0 35.0

LM358ADGKR VSSOP DGK 8 2500 364.0 364.0 27.0
LM358ADGKR VSSOP DGK 8 2500 332.0 358.0 35.0

LM358ADR SOIC D 8 2500 364.0 364.0 27.0

LM358ADR SOIC D 8 2500 340.5 338.1 20.6
LM358ADRG4 SOIC D 8 2500 340.5 338.1 20.6
LM358ADRG4 SOIC D 8 2500 367.0 367.0 35.0

LM358APWR TSSOP PW 8 2000 367.0 367.0 35.0
LM358APWR TSSOP PW 8 2000 364.0 364.0 27.0
LM358DGKR VSSOP DGK 8 2500 332.0 358.0 35.0
LM358DGKR VSSOP DGK 8 2500 364.0 364.0 27.0

LM358DR SOIC D 8 2500 367.0 367.0 35.0

LM358DR SOIC D 8 2500 340.5 338.1 20.6
LM358DRG3 SOIC D 8 2500 364.0 364.0 27.0
LM358DRG4 SOIC D 8 2500 340.5 338.1 20.6
LM358DRG4 SOIC D 8 2500 367.0 367.0 35.0

LM358PSR SO PS 8 2000 367.0 367.0 38.0

LM358PWR TSSOP PW 8 2000 364.0 364.0 27.0

LM358PWRG3 TSSOP PW 8 2000 364.0 364.0 27.0

Pack Materials-Page 4

MECHANICAL DATA

MCER001A – JANUARY 1995 – REVISED JANUARY 1997

JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE

0.400 (10,16)

0.355 (9,00)

0.063 (1,60)

0.015 (0,38)

0.100 (2,54)

8

1

5

4

0.065 (1,65)

0.045 (1,14)

0.020 (0,51) MIN

0.023 (0,58)

0.015 (0,38)

0.280 (7,11)

0.245 (6,22)

0.310 (7,87)

0.290 (7,37)

0.200 (5,08) MAX
Seating Plane

0.130 (3,30) MIN

0°–15°

0.014 (0,36)

0.008 (0,20)

NOTES: A. All linear dimensions are in inches (millimeters).

B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification.
E. Falls within MIL STD 1835 GDIP1-T8

4040107/C 08/96

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.

TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.

TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Products Applications

Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265

Copyright © 2014, Texas Instruments Incorporated