Telefunken TTV299 Owner Manual

MODEL: TTV-299
FULL ON SCREEN DISPLAY 228 PROGRAM MEMORY WITH INFRARED REMOTE CONTROL
OWNER'S MANUAL
Contents
st before operation so that
Dear Customer:
Thank you for purchasing our latest TV set. Please read this instruction manual carefully fir you can use it in a safe and reliable manner. Please also store it safely for future reference.
I. Safety and Precautions
………………………………………………………………….. 2
II. Installation
Antenna connection. ……………………………………………………………………… 3 Remote control Preparation …………………………………………………………….. 4
III. Control Location
Television…………………………………………………………………………………… 5
Remote control……………………………………………………………………………. 6
IV. Operating Instructions
Turn the power supply ON/OFF…………………………………………………………. 7
V. TV operation
Program Selection…………………………………………………………………………… 8
Adjustment …………………………………………………………………… 9 Program preset (automatic search) Program preset (Semi automatic search) Fine tune Skip over undesired Program number
Basic operation: Picture and sound control ……………………………………………… 12
Setting time …………………………………………………………………… 14
Set automatic volume limit
Technical operation: Single button hopping, program sequence. ……………………… 17
Sleep time, , auto volume limit setting …………………………………………………….
Set sleep Timer
Selection of blue background and black stretch …………………………… 16
VI. Connection with Other Devices
Connect CD, VCD, DVD or other sound, picture and audio or video output
devices
………………………………………………………………………………. 18
VII. Miscellaneous
Guide to simple trouble-shooting …………………………………………………………. 19 Specification ………………………………………………………………………………… 20 Packing ……………………………………………………………………………………… 20
15
Safety and Precautions
To ensure safe and reliable operation of the TV set, please observe the following precautions in
installation, operation and maintenance.
AAAAttention
ttention:
ttentionttention
1·Pay attention to the power supply cord before installing the TV set. Do not hang anything on the
cord, and avoid treading on the cord.
2·The slots on the back housing are designed for ventilation to prevent overheating. They must
never be covered or blocked. The TV set must not be placed near a heat source such as radiator, air ducts direct sunlight.
3·The outdoor antenna must not be erected close to HV lines or other power supply lines. Use
extreme care when erecting the antenna.
4·This TV must be connected to AC 240V 50Hz. Never connect to DC supply or any other power
supply
5·Do not let any object fall into the ventilation openings of the TV set housing, nor let any liquid
flow into the it via the openings. This may cause the television to short circuit
6·Do not subject the TV set to rain, or use it in damp environment. In cleaning dust, be sure to
remove the power supply plug from its socket first. Do not clean the housing directly with liquid detergent, use a damp cloth. Be sure to remove the power supply plug from its socket and remove the antenna plug during a thunderstorm or when it will not be used for long time, to avoid components being damaged by lightning.
7·If you use an indoor antenna, do not let it touch any electrical appliance, or normal reception of
TV program may be affected.
:
: :
Safety:
Safety:
Safety:Safety:
1Never open the rear of the television . High Voltage components can cause fire, electric shock or
injury. All internal work should be carried out by qualified TV service personnel only
2. Remove the power supply plug from its socket in case of the following conditions, and consult
with service personnel.
(1) The power cord and plug is damaged or cracked. (2) Any object has fallen into or liquid flown into the TV set. (3) The performance of TV set has deteriorated significantly or there is damage on the housing. (4) The TV set will not operate normally according to the instructions.
3. Please remove the power supply plug from its socket when the TV set will not be used for long
time.
Installation
First read carefully the relevant instructions in Place the TV set in the room where there is no direct sunlight on it. Any light reflecting from the
screen will cause eye fatigue. Use gentle indirect lighting for comfortable watching. The best distance of watching is 5~7 times the screen height.
Keep a space of 10 cm or over between the TV set and wall for good ventilation.  Never put the TV set at location with excessive temperature or moisture, to avoid damage or failure of
its components
Automatic demagnetizing
A colour TV set is likely to be affected by magnetic field, to cause stain on screen or colour distortion. If the TV set is moved while on, turned or affected by a magnetic object nearby, turn off the power supply and wait for at least 1 hour to turn it on again, to ensure that the automatic demagnetizing circuit will work normally again, to eliminate the effect of magnet on colour and resume the vivid pictures.
Antenna connection method
.
“Safety and precautions”.
(300Ω)
(300Ω-75Ω)
(75Ω)
To ensure best reception, use outdoor antenna or cable antenna (CATV). The type and location of
antennas shall vary with places. Notes: Connect the outdoor antenna as shown above, and also install a lightning arrester and perform periodical checking and repair. It is suggested that a 75Ω coaxial cable be used, to eliminate interference or noise due to improper matching of impedance. The cable must not be tied together with supply cord.
2
Installation
Remote Control Preparation
Installing the batteries
1
Remove the sliding cover
from the remote control.
Precautions in operating the remote controller
Aim the remote control at the infrared receiving window on the TV set.
Do not press the keys on the remote control quickly and continuously.
If the remote control will not be used for long time or if the batteries are flat, please take the batteries
out to prevent leaking.
Never throw the battery into fire, and properly dispose of the used batteries.
Take care not to drop, wet or dismantle the remote control.
Load two Size AAA batteries into the chamber, with the +/- poles of batters in line with the +/- marks.
Control Location
Television
Front Panel & Input/ Output Terminals
The control buttons are in the front of the TV (below the picture tube), behind the cover.
1. Main power switch
2. Remote control sensor
3. Power indicator
4. Program number up (+) and down (-)
5. Volume up (+) and down (-)
6. Menu button
7. TV/AV button
8. AV socket
9. Antenna input and AV IN/OUT terminals
V-MENU P-TV/AV
P+ V+
7
6
54 3
2
1
Names and Functions of Controls
Remote control
1
2 3
4
5
6
7
8
9
10
11
12
13
14
15
16 17 18
19
20
21
22
23
24
Buttons on remote controller:
1. AV status switch button
2. TV switchover
3. Sound system button
4. Game button
5. AVL button
6. Clock button
7. Volume UP/DOWN button
8. Prog.swap button
9. Tuning button
10. Feature button
11. Direct Program number buttons
13. Standby button
14. Screen display button
15. Colour system button
16. I/II button (The button is non-functional.)
17. Effect button (The button is non-functional.)
18. Timing button
19. Program number Up/Down button
20. Menu button
21. Picture button
22. Sound button
23. Program back view button
Loading...
+ 15 hidden pages