Telefunken TF-MID1001G User Manual [ru]
10.1” TABLET PC/
10.1” ПЛАНШЕТ
TF-MID1001G
Instruction manual
Руководство по
эксплуатации
Table of contents
Table of contents
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
Table of contents
Before you start
Important safeguards
General provisions
Health and safety of the user
Power adapter, ports and connectors
LCD
Cleaning and maintenance
Utilization of the product
Battery
Operation
Control elements
Front panel
Rear panel
Right panel
General operation
Power on/off
Reboot the device
The main screen
Status Bar
Adding/Removing objects to the desktop
Wallpaper
Upgrade basic software (OS)
Connections
Connecting to Wi-Fi
3G connectivity
A-GPS
Connect the external USB-drive
Connect the memory card
Connecting in USB-drive mode
HDMI-out
Applications
Installing applications
Deleting applications
List of applications
System setup
The setting menu
The menu «Wireless & Networks»
Menu «Device»
2
Menu «Personal»
3
The menu «System»
3
General information
3
Troubleshooting guide
3
Accessories
3
Warranty
4
Specifications
4
4
4
5
5
5
5
5
6
6
6
6
6
6
7
7
8
8
8
8
8
9
9
9
9
9
10
10
11
11
11
11
12
12
14
14
14
14
15
2
2
Before you start
Important safeguards
General provisions
• Read attentively this manual to familiarize
yourself with the device.
• Keep this manual handy as a reference
for operating procedures and precautions. Do
not allow the use of the device by unauthorized
persons who have not read and understood
this instruction manual.
• Usage of the device at temperatures
beyond the operating temperature range
significantly reduces the life of the screen and
other components of the device and can lead
to failure of the device.
• Avoid strong hitting or shaking of the
housing of the unit.
• Do not use the device in conditions of
electromagnetic radiation. Do not place the
device near credit cards, tickets, etc., otherwise
the magnetic cards may be damaged.
• Make sure the power supply is turned off
if you are not going to use the device for a long
time or during a thunderstorm.
• Make sure the power supply is turned
off if some incorrect operation of the device is
detected or the device is overheated, makes
uncharacteristic sounds, smell, emitting smoke
or liquid has been spilled onto it. In these cases
a qualified technical maintenance is required.
• Do not use the unit while driving. Observe
the law and traffic rules of the country of your
residence.
• The device must be turned off during
takeoff or landing when used in an airplane.
• Do not use the device in locations subject
to electronic interference or static electricity.
This can cause data loss.
• In case the unit fails, contact a sales
representative or nearest service center.
Health and safety of the user
• Electrical equipment can be dangerous
if used improperly, so any operation with this
device should always be supervised by adults.
Do not allow children to touch the internal parts
and cables of this device.
• To ensure complete safety, do not
disassemble the casing and do not try to get
inside the unit. Repairs should be performed by
qualified personnel only.
• Do not spill liquids on the device. This
can cause electric shock. Besides, if liquid or
dust get inside the unit, it may cause failure,
overheating and smoke. Keep the unit dry.
• Make sure there are no foreign objects
inside the device. They can cause malfunctions
or fire.
• Using headphones at high volumes can
lead to permanent hearing loss. You can
increase the volume to a level at which sound
is perceived normally and does not lead to
irritation and damage to your hearing. Set the
volume at a safe level.
• If you have a regular ringing in your ears,
reduce volume or stop using the device.
Power adapter, ports and
connectors
• Do not touch the power adapter with wet
hands. This can lead to electric shock.
• Use only the suppled power adapter.
Using other power adapters with this unit may
cause damage to it.
• The adapter can be connected only to the
type of electrical network the parameters of
which are specified on the rating label. If you
are not sure of the parameters of power supply
and power adapter, please contact one of the
manufacturer's authorized service centers.
• Ensure that the plug the power adapter is
securely inserted into the power supply socket.
Otherwise it may cause fire.
• Do not step on the AC adapter cord or
place heavy objects on it.
• Do not stretch or tangle the cable.
• After charging, disconnect the adapter
from the wall outlet.
• When unplugging the AC adapter from the
wall pull the plug, do not pull the cable itself.
• Do not connect the adapter to any other
devices.
Before you start
3
3
Before you start
Before you start
• Keep the power adapter out of the reach
of children.
• Do not insert connector plugs into ports
with force. If a plug can not be easily inserted
into the port, maybe the connector and port
do not match. Make sure that the connector
matches the port and the connector is aligned
with the port.
LCD
Liquid-cristal isplay (LCD) is a delicate
device that requires careful handling.
• Do not touch the screen with sharp objects.
• Do not exert strong pressure on the
screen and do not place any objects on it. This
can cause damage to the display and failure of
the device.
• Do not expose the display to direct
sunlight.
Cleaning and maintenance
• Before cleaning the device, make sure it
is switched off.
• To clean the LCD screen and casing of
the device use a soft cloth, special tissue and
special cleaners. Do not use aerosol sprays,
solvents, alcohol or abrasives.
The manufacturer reserves the right to
make changes in specifications, appearance,
contents of SW and equipment of the goods
unilaterally, without prior notice.
and recycling and thus prevent potential
negative effects on the environment and
human health.
Battery
Connect the power adapter to the electric
supply network and insert the adapter plug
into the power connector of the device.
While charging the process is displayed as
an additional “lightning” symbol in the power
icon: . We recommend not to disconnect the
device until the battery is fully charged. When
the battery is fully charged, the power icon on
the screen will be completely filled.
In order to maintain efficiency and
prolong the battery life, follow the instructions
described below:
• Before first use, it is recommended to
attach the device to the electric mains for 8-12
hours to fully charge the battery.
• Do not charge the device at high
temperature.
• Do not recharge the device too often: you
can do this at a time when the display shows a
low level of charge.
• If you are not using the device for a long
time, recharge the battery at least once in two
weeks, do not wait for the moment of complete
discharge.
Utilization of the product
If you want to dispose this product, do not
mix it with general household waste. There is a
separate collection system for used electronic
products in accordance with legislation that
requires proper treatment, recovery and
recycling.
Please contact your local authorities for
the correct method of disposal. By doing so,
you will ensure that your disposed product
undergoes the necessary treatment, recovery
4
4
Control elements
Operation
Front panel
Rear panel
3
4
6
7
8
9
10
11
1
2
OperationA
1. Display
2. Front (additional) camera
3. Main camera
4. RESET button (hole)
5. Speaker
6. 3G SIM card slot
7. DC in
8. Micro USB port
9. HDMI output
10. Earphone jack
11. MicroSD slot
12. POWER button
13. VOL+/- buttons
5
13
12
5
5
Operation
button until the logo appears. Then there will
be splash screen and main screen. Hold down
the icon and drag it to the right onto the icon
representing an open lock to unlock the device.
for regular use of the device. In this mode,
the device is active, but the display is turned
off at the same time, and the main screen is
locked. This allows you to instantly access
your operating system, while at the same time
excludes accidental pressing on the display
and saves energy. To go into sleep mode or
out of it, briefly press the power button.
until a prompt appears asking to switch off the
device. Click “OK” to shut down.
switched off automatically after notifying the
user about the problem. Moreover, all unsaved
data may be lost. To avoid this, save your open
documents, close all applications and connect
the computer to a power source.
Operation
General operation
Power on/off
• Power on: Press and hold the power
• Sleep Mode: Sleep mode is convenient
• Turn off: Press and hold the power button
In case of low battery the unit can be
Reboot the device
If the device cannot be powered on and
does not respond to charging, then restart it
by pressing RESET button (hole) with a thin
pointed object, and then wait for restarting.
After the reboot please turn off and
then turn on the device to activate both
keyboard language presets.
The main screen
After unlocking the main screen opens that
provides access to operating the device.
The screen has the status bar (bottom), the
desktop, which can be extended by pressing a
finger on the screen and moving it left or right,
and icons for access to applications. Elements
of the main screen (Fig. 1):
1. Google Search. Click to go to the search
page of Google.
2. Voice search.
3. Alarm clock
4. Click to call the list of all installed
applications.
5. “Back” button. Click to return to the
previous page/screen.
6. “Home” button. Click to go to home page.
7. Click here to quickly switch between
active applications.
8. Application icons
9. Bluetooth connection
10. Clock
11. Status of Wi-Fi connection
12. Battery charge indicator.
Status Bar
At the bottom of the screen there is the
status bar containing the controls, the area of
system alerts, indicators, wireless connections,
battery indicator and clock. To access the
Quick menu or see the details of the system
when receiving a notification, click on the
status bar at the bottom right corner, then click
on the icon.
Adding/Removing objects to the
desktop
• Adding a shortcut: Click the applications
6
6
1 2 3 4
5 6 7 8 9 10 11 12
Operation
Figure 1
OperationA
menu button (4) in the top right corner of the
main screen, select the item you wish to place
on your desktop. Click on the icon for the item
and hold for 3 seconds. Do not take off your
finger from the screen, drag the icon to a blank
space of the active desktop, release the icon,
and it will lock on the desktop.
You can move any object in the space
of the active screen. You can not add a new
object on the desktop screen, if the space is
filled. Remove unused objects from the active
screen, or add a new object to another screen
desktop.
• Removing an object from the desktop:
On the Home screen, click the unwanted item
and hold for 3 seconds, the top of the desktop
screen appears white cross. Do not take off
your finger from the screen and drag and drop
it on the cross when the cross turns red.
Deleting an object from the desktop
will not delete it from your system. Any object
can be restored on the desktop as described
above.
Wallpaper
There are two ways to set the background
image on your desktop and screen lock:
• On the Home screen, click on a blank
area of the desktop and hold for 3 seconds,
select the image available on the device. Click
“Set Wallpaper”.
• On the Home screen, click the
applications menu button (4) in the top
right corner of the main screen, in the tab
“Applications” select “Settings”. In section
“Display” select “Wallpaper”. Select a picture
available on the device. Click “Set Wallpaper”.
Upgrade basic software (OS)
• In the page of this model on the
manufacturer’s website you can find the
current version and update the OS (if any). Do
not use the OS from other models, because
they are incompatible and cannot provide full
and stable operation of the device.
• If your device is working properly, do not
update the software, since it is quite possible,
the device has a newer version of the software.
7
7
Operation
Operation
• Before upgrading/replacing the OS make
sure that the OS is designed for models with
the same serial numbers as your device (the
serial number is on the back panel of your
device). To perform the upgrade/replacement
of the OS, follow the instructions posted on the
page model on the manufacturer’s website.
Connections
Connecting to Wi-Fi
• Click the applications menu button (4) in
the top right corner of the main screen, in the
tab “Applications” select “Settings”. In section
“Wireless & Networks” click Wi-Fi to set into the
ON position.
• Connecting to the network: The system
automatically detects available Wi-Fi-networks
and displays their names; select a network you
want to connect and, if necessary, enter the
password. When the connection is successful,
the display shows the Wi-Fi icon (11) in the
notification area. The number of blue sectors of
the icon shows the level of Wi-Fi signal.
To add a Wi-Fi network to the list, click
“Add Network” in the top right corner, then use
the pop-up keypad to enter the network name
and click “Save”.
After disabling Wi-Fi please switch 3G
module off and hen turn it on again.
3G connectivity
Insert a 3G SIM-card into the appropriate
slot of the unit. Click the applications menu
button (4) in the top right corner of the
main screen, in the tab “Applications” select
“Settings”. In “Wireless & Networks” select
“More ...”. Click on “Mobile Networks”, put a
tick next to «Modem power» and enter the PINcode. In the “Mobile network settings”, select
“Access Point». Select your access point from
the list or adjust manually. When a successful
connection is performed, icon appears in
the system tray.
• When using a device with 3G, while
out of network coverage, you must disable
the transmission of data in order to free the
system from constant attempts to register in
the network. This is recommended to prevent
braking system and a long battery life.
• Impossibility of 3G-connection can be
caused by the lack of 3G coverage in place
where you are staing, and in this case it is not
a defect of the device.
A-GPS
• A-GPS function enables you to
determine the coordinates of the location of
mobile devices and display it on the map.
Determination of location is performed via
cellular connection channel and/or Wi-Fi.
• Click the applications menu button (4) in
the top right corner of the main screen, in the
tab “Applications” select “Settings”. In “Location
services” put a tick next to the option “Google’s
location service” and remove the tick for the
option “GPS satellites». Now when you start
working with map application (Google Maps),
after clicking on the icon the map will
display the location of your device.
Connect the external USB-drive
• Connect an external USB-drive with a
miniUSB cable to the MiniUSB or USB (Host)
port of this unit. Run the application “Explorer»
and select «USB» to access the contents of
the connected drive.
• You can connect other peripheral USBdevices (e.g. mouse, keyboard, external hard
drives). It’s enough to connect the peripheral
device to the tablet, the device will be
recognized and connected automatically.
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
8
8
Operation
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
Connect the memory card
The tablet PC is equipped with a slot for
memory cards microSD. The maximum
supported card capacity - 32 Gb. After properly
installing a memory card, this device detects
it automatically. To safely remove the memory
card, follow these steps: click the applications
menu button (4) in the top right corner of the
main screen, in the tab “Applications” select
“Settings”, select “Storage”, click on “Eject SDcard” and complete the transaction. Press on
the card until it clicks, then pull it out of the slot.
Install the card into the slot in the proper
direction and side. For proper operation of
the device, use licensed MicroSD cards of
well-known manufacturers. Avoid the use of
counterfeit cards by dubious brands.
Connecting in USB-drive mode
• Connect the USB connector of a PC to
the MiniUSB port of this unit with a miniUSB
cable. Click “Turn on USB storage” at the
bottom of the screen. After a while the device
is detected as a removable USB-drive, and you
will have access to the internal memory of the
tablet and the memory card.
• To turn off the tablet connected in USBdrive node, click “Turn off USB storage” at the
bottom of the screen.
HDMI-out
Connect the HDMI output of the device to
the HDMI input of an external device (e.g., TV)
with a HDMI-cable (not supplied). Now, the
tablet PC can be used as a source of highquality digital signal for the connected external
device.
When you connect the tablet via HDMI
to an external device, the screen turns off, and
in this case, to perform operations you can use
both the touch screen and a computer mouse
connected to the tablet.
OperationA
Applications
Installing applications
In addition to the basic application package
by Android, you can install additional software
on your own. Programs can be installed
from memory cards or USB-flash drives,
downloaded from the Internet or from the
official online catalog of Android Market.
• Installing applications from Android
Market: Installation of applications from
Android Market Internet service is only
available to registered users. Play Market
application comes as standard software, and
it is in general list of installed applications.
After the first running of the application you
will be prompted to set up an account. On the
first page «Setting up an account Google»,
press «Next». If you already have a Google
account, click «Login», enter your user name
and password and click «Enter» again. If you
do not have a Google account, it should be
created. To do this, click «Create» and follow
the instructions on the screen. All applications
in the Android Market catalog are grouped by
category («Widgets», «Multimedia», «News
& Weather», «Tools» etc.). To install an
application it is enough to click «Install» (or
«Buy» if the application is not free).
To use the Android Market it is
necessary to connect to the Internet. Before
working with the Android Market application,
make sure that your device has correct current
date and time setting, otherwise connection to
the server can fail;
• Installing on your own: Record the setup
file (the file format is .apk) on a memory card,
flash drive or internal memory. Locate the file
in the «Explorer». Open the file and confirm the
installation.
For safety reasons, installation of
applications received not the Android Market
9
9
Operation
is disabled by default. If you still need to install
an application, activate the item «Unknown
sources» under the «Settings» => «Security».
top right corner of the main screen, in the tab
«Applications» select «Settings». Open the
«Apps»; find and select the application from the
list, click «Uninstall» and confirm the action.
can not be deleted.
Operation
Deleting applications
Click the applications menu button (4) in the
Applications that are part of the system
Camera application interface
1. Browsing images
2. Selecting front/rear
1
camera
3. Press to record
4. Adjusting white balance
5. Photo mode
2
6. Video mode
7. Panoramic shooting
3
mode
List of applications
1. Google Maps - a set of applications based
on mapping service and technology provided
by «Google» company.
2. Gmail (from Google Mail) - e-mail service
from Google. Provides access to mailboxes via
a web interface.
3. Email (Electronic Mail) - technology that
provides services for sending and receiving
electronic messages distributed in network.
4. Browser (Web browser) - software for
viewing Web sites, that is requesting a Web
page (mainly from the Internet), processing,
and page navigation. Entering addresses
and requests is performed by using pop-up
keyboard accessible by clicking on the search
bar in the browser interface.
5. Calendar - software that emulates the
functions of the calendar and allows you to see
dates and set event reminders.
6. Calculator - software that emulates the
functions of the calculator and allows you to
perform operations on numbers or algebraic
formulas.
7. Camera - an application that allows you
to perform video and photography recording
with both cameras of the device. You can also
activate the camera application by holding and
dragging the icon to the left on the icon
representing a camera in screen-lock mode.
4
5
6
7
8. Gallery - a program enabling you to view
and edit image files contained in this unit and
external devices. Menu of operations with
images (cropping, rotation, ability to set image
as wallpaper, etc.) is available by clicking the
icon in the upper right corner of the gallery
interface.
9. Google search - application enabling you
to perform quick search in the Google search
engine.
10. Music - software player that can play
audio files contained in this unit and external
devices, including operations such as rewind,
stop, pause, change the playback order,
repeat. The menu of additional functions
(setting track as ringtone, delete tracks,
equalizer, etc.) is available by clicking the
icon in the status bar of the audio player
interface.
11. Video - software video player that play
audio files contained in this unit and external
devices, including operations such as rewind,
stop, pause, adjust the brightness, select the
format of the video. To call/hide the operation
menu, click on the screen during playback.
The menu of additional functions (language
subtitles and audio language selection, etc.)
is available by clicking the icon in the
10
10
Operation
lower right corner of the operation menu in the
interface of the video player.
12. Clock - a program that emulates the
functions of a clock and allows to set an alarm.
13. Advanced task manager - a program
with which you can check the status of system
processes and memory devices and quickly
switch to different applications and perform
other useful operations.
14. Recorder - a program that allows you to
record sound via the microphone of this unit.
15. iReader - a program for reading
electronic books in various formats. To call/hide
the menu of operations with books (change the
font size, style, add bookmarks, etc.) click on
the screen while displaying a book.
16. Explorer - an application that implements
a GUI user access to files in the operating
system.
17. Skype - software enabling you to transfer
encrypted voice and video calls between
computers over the Internet (VoIP), as well as
services for calls to mobiles and landlines.
18. Youtube - an application that provides
video hosting services. Users can add, view
and comment on videos.
19. ApkInstaller - service enabling to manage
the applications contained in the device and the
external storages, performing such operations
with applications as installation, uninstallation,
launching and export.
System setup
The setting menu
The settings menu of the operating system
(Figure 2) allows you to connect to WiFi,
adjust the display settings and sound, set the
language settings, date and time, manage
installed applications and much more. There
are two ways to call settings menu:
• On the Home screen, press
Application menu button (4) top right
corner, in the tab «Applications»
select «Settings».
• Tap the status bar at the bottom right
corner, then from the menu, click on the icon,
menu, select quick setup «Settings».
OperationA
The menu «Wireless & Networks»
Menu => Settings => Wireless & Networks
• Wi-Fi. See section «Connecting to Wi-Fi»
above.
• Bluetooth. If you select «ON» for this
item, you can connect the tablet to another
device via Bluetooth with an intuitive menu.
• Data usage. This section allows you to
enable/disable the account of mobile traffic, set
a limit and view traffic statistics.
Menu «Device»
Menu => Settings => Device
• Sound
Volumes: Adjust the playback volume of
music and the notifications.
Default notification: select the melody for
notifications.
Touch sounds: Enable/disable the sound of
pressing on the screen.
Screen lock sounds: turn on/off the clicking
sound of screen lock.
• Display
Brightness: adjust the screen brightness.
Wallpaper: select a background image for
your desktop.
Auto-rotate screen: Enable/disable the
automatic change screen orientation.
Sleep: Set the time after which the device
automatically switches to sleep mode if no
operations.
Font size: Set font size.
• Storage. This section allows you to view
information about available total and free
space in memory, as well as operation with
memory cards, if connected.
• Battery. This section allows you to view
status information and battery level and time of
its operation.
• Apps. This section allows you to manage
installed applications to view information about
installed programs, and if necessary uninstall
11
11
Loading...