TEL P6KE11C, P6KE11CA, P6KE12, P6KE120CA, P6KE120A Datasheet

P6KE SERIES

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts	600Watt Peak Power	5.0 Watt Steady State
FEATURES		DO-15

•Plastic package has Underwriters Laboratory Flammability Classification 94V-O

•Glass passivated chip junction in DO-15 package

•600W surge capability at 1ms

•Excellent clamping capability

•Low zener impedance

•Fast response time: typically less

than 1.0 ps from 0 volts to BV min

•Typical IR less than 1 A above 10V

•High temperature soldering guaranteed: 260 /10 seconds/.375”,(9.5mm) lead length/5lbs., (2.3kg) tension

MECHANICAL DATA

Case: JEDEC DO-15 molded plastic

Terminals: Axial leads, solderable per

MIL-STD-202, Method 208

Polarity: Color band denoted cathode except Bipolar

Mounting Position: Any

Weight: 0.015 ounce, 0.4 gram

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA Suffix for types P6KE6.8 thru types P6KE440

Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified.

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

RATING	SYMBOL	VALUE	UNITS
Peak Power Dissipation at TA=25 , TP=1ms(Note 1)	PPK	Minimum 600	Watts
Steady State Power Dissipation at TL=75 Lead Lengths	PD	5.0	Watts
.375”,(9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave	IFSM	100	Amps
Superimposed on Rated Load(JECED Method) (Note 3)
Operating and Storage Temperature Range	TJ,TSTG	-65 to +175

NOTES:

1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25 per Fig. 2. 2.Mounted on Copper Leaf area of 1.57in2(40mm2).

3.8.3ms single half sine-wave, duty cycle= 4 pulses per minutes maximum. RATING AND CHARACTERISTIC CURVES

P6KE SERIES

Fig. 1-PEAK PULSE POWER RATING CURVE

Fig. 2-PULSE DERATING CURVE

Fig. 3-PULSE WAVEFORM

Fig. 4-TYPICAL JUNCTION CAPACITANCE UNIDIRECTIONAL