TEL 5KP90CA, 5KP90C, 5KP90A, 5KP90, 5KP85C Datasheet

5KP SERIES

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 5.0 TO 110 Volts	5000 Watt Peak Pulse Power
FEATURES	P-600

•Plastic package has Underwriters Laboratory Flammability Classification 94V-O

•Glass passivated junction

•5000W Peak Pulse Power capability on 10/1000 S waveform

•Excellent clamping capability

•Repetition rate(Duty Cycle): 0.05%

•Low incremental surge resistance

•Fast response time: typically less than 1.0 ps from 0 volts to BV

•Typical ID less than 1 A above 10V

•High temperature soldering guaranteed: 300 /10 seconds/.375”,(9.5mm) lead length/5lbs., (2.3kg) tension

MECHANICAL DATA

Case: Molded plastic over glass passivated junction

Terminals: Plated Axial leads, solderable per

MIL-STD-750, Method 2026

Polarity: Color band denotes positive end(cathode) Except Bipolar Mounting Position: Any

Weight: 0.07 ounce, 2.1 grams

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA Suffix for types

Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified.

RATING	SYMBOL	VALUE	UNITS
Peak Pulse Power Dissipation on 10/1000 S waveform	PPPM	Minimum 5000	Watts
(Note 1, FIG.1)
Peak Pulse Current on 10/1000 S waveform	IPPM	SEE TABLE 1	Amps
(Note 1, FIG.3)
Steady State Power Dissipation at TL=75 Lead Lengths	PM(AV)	8.0	Watts
.375”,(9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave	IFSM	400	Amps
Superimposed on Rated Load, (JECED Method) (Note 3)
Operating Junction and Storage Temperature Range	TJ,TSTG	-55 to +175

NOTES:

1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25 per Fig. 2. 2.Mounted on Copper Leaf area of 0.79in2(20mm2).

3.Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle= 4 pulses per minutes maximum.

RATING AND CHARACTERISTIC CURVES 5KP SERIES

Fig. 1-PEAK PULSE POWER RATING CURVE

Fig. 2-PULSE DERATING CURVE