TEL P6SMBJ10, P6SMBJ110, P6SMBJ10CA, P6SMBJ130, P6SMBJ120CA Datasheet

P6SMBJ SERIES

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 5.0 TO 170 Volts Peak Power Pulse - 600Watt

FEATURES

l For surface mounted applications in order to
optimize board space

l Low profile package
l Built-in strain relief
l Glass passivated junction
l Low inductance
l Excellent clamping capability
l Repetition Rate(duty cycle):0.01%
l Fast response time: typically less than

1.0 ps from 0 volts to BV for unidirectional types

l Typical ID less than 1A above 10V
l High temperature soldering :

260/10 seconds at terminals
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O

SMB/DO-214AA

MECHANICAL DATA

Case: JEDEC DO-214AA molded plastic
over passivated junction
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes positive end(cathode)
except Bidirectional
Standard packaging:12 mm tape per(EIA 481)
Weight: 0.003 ounce, 0.093 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25ambient temperature unless otherwise specified.

Peak Pulse Power Dissipation on 10/1000s waveform

SYMBOL VALUE UNITS

P
(Note 1,2,Fig 1)
Peak Pulse Current on 10/1000s waveform

I
(Note 1,Fig 3)
Peak forward Surge Current 8.3ms single half sine-wave

I
superimposed on rated load(JEDEC Method) (Note 2,3)
Operating Junction and Storage Temperature Range TJ,T

Minimum 600 Watts

PPM

See Table 1 Amps

PPM

100.0 Amps

FSM

-55 to +150

STG



NOTES:

1.Non-repetitive current pulse, per Fig. 3 and derated above TA=25per Fig. 2.

2.Mounted on 5.0mm2 (.013mm thick) land areas.

3.Measured on 8 .3ms, single half sine-wave or equivalent square wave, duty cycle= 4 pulses per minutes maximum.

MAXIMUM RATINGS AND CHARACTERISTIC CURVES P6SMBJ SERIES

Fig. 1-PEAK PULSE POWER RATING VERSUS Fig. 2-PULSE RATING CURVE

Fig. 3-PULSE WAVEFORM Fig. 4-TYPICAL JUNCTION
CAPACITANCE

Fig. 5- MAXIMUM NON-REPETITIVE PEAK

FORWARD SURGE CURRENT