Teka TKW 1070 User Manual

Download

AUTOMATIC DRUM WASHING MACHINE

USER MANUAL

TKW 1070

Delay

03 - 09 10 - 1

6- 2

TABLE OF CONTENTS

BEFORE USE USING THE APPLIANCE MAINTENANCE

COMPONENTS> ............................... 03

PREPARATION> ................................ 04

SAFETY INSTRUCTIONS> ................... 05

INSTALLATION> ................................ 06

CONTROL PANEL> ............................ 08

LEGEND

Yes

Optional

For your safety, any instructions in this manual with this "Warning" sign must be followed strictly.

PROGRAM SELECTION> ..................... 10

CONSUMPTION AND TECHNICAL DATA> ..

WASHING METHODS> ...................... 12

CLEANING & CARE> .......................... 16

DISPLAY CODES> ............................. 18

TROUBLESHOOTING> ........................ 19

WIRING CIRCUIT..............................20>

DISPOSAL

As a responsible retailer we care about the environment. As such we urge you to follow the correct disposal procedure for your product and packaging materials. This will help conserve natural recourses and ensure that it is recycled in a manner that protects health and the environment. You must dispose of this product and its packaging according to local laws and regulations. Because this product contains electronic components, the product and its accessories must be disposed of separately from household waste when the product reaches its end of life. Contact your local authority to learn about disposal and recycling. The product and packaging should be taken to your local collection point for recycling. Some collection points accept products free of charge. We apologize for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development.

BEFORE US

COMPONENTS

THANKS FOR PURCHASING A TEKA PRODUCT

Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.

Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.

If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass on this manual so that the new owner can become familiar with the appliance and safety warnings.

ACCESSORIES

Check the accessories and literature

in accordance with this list:

1x Inlet hose assembly

1x User manual

1x Warranty card

MANUAL DE INSTRUCCIONES ES

BEDIENUNGSANLEITUNG DE

INSTRUCTION MANUAL EN

NOTICE D’UTILIZATION FR

MANUAL DE INSTRUÇÕES PT

MANUALE D’USO IT

TK2 1480 TK2 1280

TK2 1280 I TK2 1070 I

TK2 1270 TK2 1270 S

TK2 1070 TK2 1070 S

Delay

Warranty Card

Garantiekarte ICarte de garantie I Garantiekaart I Гаранционна карта IZáruční list I Garanti certifikat IFormulario de garantía I Carte de garantie I Garantieschein I Εγγύηση I Jótállási jegy I Certificato di garanzia I Garantiekaart I Garanti sertifikat I Karta gwarancyjna I Certificado de garantia I Certificat de garanţie I Гарантийный талон IGarantisedel I Гарантійний талон

Please check back cover for product information label

1x Drain hose bracket

4x Blanking plugs

BEFORE USE

PREPARATION

PREPARING THE MACHINE

Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon opening the package, water drops may be seen on the plastic bag and the porthole. This is normal phenomenon resulting from water tests in the factory.

DESCRIPTION

This diagram may be slightly different from the layout of the washing machine you have just purchased due to technical improvements.

Control panel Door handle Work top Washer door Power Detergent distribution drawer

Filter cover

Drain hose

Water inlet valve

Power cord

Back cover screws

Back cover

Transportation bolts

Delay

BEFORE US

SAFETY INSTRUCTIONS

BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME

DO ...

... Make sure that the transport bolt are removed. ... Use a separate earthed socket for the power supply. ... Make sure that the plug is accessible. ... Hold the plug and not the electric cable when

unplugging the power supply.

... Make sure that the fuses in the power circuit are rated

for 15A.

... Keep away from heat sources and direct sun light to

prevent plastic and rubber components from aging.

... Make sure that the power cord is not caught under or

in the appliance and avoid damage to the power cable.

... Check that hose joints and connections are ﬁ rm and no water can leak. If joints are loose or there is leakage, turn off the water supply and reﬁ x. Do not use the washing machine until the hoses are properly ﬁ xed.

DURING DAILY USE OF THE APPLIANCE

DO ...

... Pull up zips and ﬁ x loose threads to prevent the items from being entangled. If necessary, put small items into a net bag or pillow.

... Turn off the machine after each wash program and switch it off at the mains to save electricity and for safety. Wipe clean the lower part of the porthole.

... Keep the door slightly open when the washing machine is not in use to prevent formation of odours.

... Let the power cord be replaced by the manufacturer, his service agent or other accordingly qualiﬁ ed persons, in case it is damaged.

... Ensure that the appliance is not used by persons with reduced physical, sensory or mental capabilities, lack of experience and knowledge without supervision or instruction by a person responsible for their safety.

... Supervise children to ensure that they do not play with the appliance.

DO NOT ...

... Touch or use the appliance when barefoot or with wet or

damp hands or feet.

... Use ﬂ ammable detergent or dry cleaning agent. ... Use any ﬂ ammable sprays in close vicinity to the

appliance.

... Remove or insert the plug in the presence of ﬂ ammable

gas.

... Allow children or inﬁ rm persons to play with the appliance

or packing materials.

... Install the appliance outdoors in a damp place, or in an area which may be prone to water leaks such as under or near a sink unit. In the event of a water leak allow the machine to dry naturally.

... Place the washing machine directly on a carpet, or close to a wall or furniture.

DO NOT ...

... Touch the washer door during the washing process - it gets hot!

...Place heavy objects or sources of heat or damp on top of the appliance.

... Hot wash foam rubber or sponge-like materials.

... Open the detergent distribution drawer during the wash cycle.

... Force the washer door open. The door is ﬁ tted with a self-lock device and will open shortly after the washing procedure is ended.

... Open the washer door if the water level is visibly over the porthole.

... Cover the washing machine with plastic cover so that inside dampness cannot be kept in.

BEFORE USE

INSTALLATION

DISMANTLE THE TRANSPORTATION BOLTS

The transportation bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process.

Remove the back cover.1. Remove the four bolts on the rear side and take out the synthetic 2.

stabilisers from within the machine.

Replace the back cover.3. Fill the holes left by the bolts with blanking plugs.4.

Note:

1.When you replace the back cover,the convexity must face to outside, and you have to insert the back cover from the two gaps as shown in ﬁ g.5.

2.Keep the transportation bolts and synthetic stabilisers in a safe place for later use.

ADJUSTING THE WASHING MACHINE

There are adjustable feet under the bottom of the washing machine. Before use, they should be adjusted so that the machine is level. This will minimise vibrations and thus noise during use. It will also reduce

wear and tear. We recommend using a spirit level to level the appliance.The ﬂ oor should be as stable and ﬂ at as possible.

INLET HOSE

BEFORE US

1. Connect the nut on the inlet hose to the connector on the water valve.

2. Apply inlet hose to a water tap with cold, fresh water.

Note: Use the hose-set supplied with the appliance. Old hose-sets should not be reused.

DRAIN HOSE

1. Use the drain hose bracket to keep the end of the drain hose retained and prevent the outﬂ ow of water. Don't extend the length of the drain hose; if an extended hose is required, please consult a serviceman.

2. The height of the drainage outlet must be 80-100 cm. Fix the drain hose to the clip at the back of the washing machine to prevent it from dropping off.

Note: The drain hose should not be submerged in water and should be securely fixed and leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less than 80cm, the washing machine will continuously drain while being filled (self-siphoning).

CONNECTING TO THE POWER SUPPLY

8 0 - 10 0cm

Before connecting to the power supply, check:

¬ The socket is adequate for the maximum power of the washing machine

(For safety, fuses in the power circuit should be rated for no less than 15A).

¬ The voltage should meet the requirement.

¬ The power outlet should be capable of accepting the washing machine plug.

¬ Connect the machine to an earthed socket outlet.

BEFORE USE

CONTROL PANEL

A Program knob

B Power Switch

C Start/Pause button

D Spinning Speed Setting button

E Washing temperature button

F Delay Button

ABCDJEK

G Detergent distribution drawer

H Display

I ECO

J Intense button

K Extra rinse button

OPERATIONAL FUNCTIONS

A ¬ Program knob _By turning the knob clockwise/counterclockwise, the required program can be selected. There are

11 programs available. After a program is selected, the corresponding light will go on.

B ¬ Power Switch _ Press this button to switch on the washing machine. Press it again to switch it off.Press On/Off

button gently for 2 seconds to switch off the machine as buttons are soft touch sensitive.

C ¬ Start/Pause

Button

D ¬ Spinning Speed

Setting Button

E ¬ Washing

temperature button

_ When the washing machine is connected to the power socket and a program is selected, lightly touch this button to start operation. During a wash cycle, touch it lightly ,operation will stop and the digits on the screen start blinking. Touch it again to resume operation. To cancel a wash program during a wash cycle, touch this button, when the digits on the screen start blinking, press the Power switch, the program will be cancelled.

_ Touch this button lightly to select the desired speed. When a speed is set, it will be displayed on the indicator.Note: If there is no indicator light displayed, it means no spinning.

Note: Different water temperatures and spinning speeds can be set for different laundries. Wash using the default settings if there is no special requirement.

_ Touch this button lightly, the washing temperature will be displayed on the indicator. Select a temperature according to the type of laundry.Note: If there is no indicator light displayed, it means cold wash.

BEFORE US

F ¬Delay Button Touch this button lightly, the washing machine will start operation after a period of time

and the corresponding indicator will go on. The range is 0.5-24 hours; each touch of this button increases a half hour. After the button is set, press the Start/Pause button to start countdown of the set time (the time is displayed on the screen until the program ends).

Note:The delay time must be longer than the program time;otherwise,the washing machine will start the wash program directly.

G ¬ Detergent

distribution drawer

H ¬Display _Information as remaining wash time and error messages will be shown here.

I Eco Before a washing program,select this program to set the washing load(1/2Full),the washing machine

_Open the drawer, three compartments can be seen: Compartment 1: Prewash detergent Compartment 2: Detergent for programs 1 to 10. Compartment 3: Softener, conditioning agent, perfume, etc.

Note: After power is switched on, the display will go on and the remaining wash time decreases. As the water pressure and temperature may differ, the remaining time maybe adjusted accordingly. When the laundry is not balanced during spinning, the time may be automatically prolonged. These are normal phenomena.

will automatically adjust the water consumption and washing time.

J Intense button If the laundry is heavily soiled, press this button before starting the program. When the button is

K Extra rinse button Press this button, the washing machine will perform additional rinses. Press the button once to

pressed, the washing time increases.

select one additional rinse. The display will show"P-1". Press the button repeatedly and the screen will display "P-2''or "P-3'', indicating two or three additional selected rinses. The "extra rinse light" is activated and ﬂ ashes during the performance. "P-1/2/3" is displayed alternating with

the remaining time. The light turns off and the display disappears when the extra rinse ends.

Note:Select this function when programe 1-9 is selected.

PROGRAM SELECTION

PROGRAM MODES

SING THE

APPLIANC

Temperature

Program Maximum Preset 2 3 1 Recommended Laundry

Lana 30°C

Sintético 40°C

Eco 40°C

Algodón 40°C

Prelavado 40°C

Rápido 15’

Ligero 30°C

Mixto 30°C

- - to 40 °C 30°C

- - to 60 °C 40°C

- - to 90 °C 40°C

- - to 30 °C 30°C

- - to 60 °C 40°C Different materials 1000 rpm

1 Detergent compartment for prewash mode

2 Detergent compartment 3 Compartment for softener and

other additives

Woolen fabrics 400 rpm

Fast colour synthetic 1000 rpm

Cotton fabrics 1000 rpm

Cotton fabrics 1000rpm

Heavy soiling 1000rpm

Slight-soil cotton, linen and synthetic fabrics

Sports wear 1000 rpm

TKW 1070

800rpm

Delicado 30°C

Aclarado

Centrifugado

Yes No Optional

- - to 40 °C 30°C Cotton or synthetic 1000 rpm

- - - -

/ 1000 rpm

/ 1000rpm

SING THE APPLIANC

CONSUMPTION AND TECHNICAL DATA

CONSUMPTION TABLE

The wash cycle times are intended as a guide only. The actual time used may vary due to different water pressure, initial water temperature, etc.

MAX.

ENERGY

PROGRAM

¬ Lana 30°C

¬ Sintético 40°C

¬ Eco 40°C

Algodón 40°C

Prelavado 40°C

Rápido 15’

Ligero 30°C

¬ Mixto 30°C

¬ Delicado 30°C

*) EN 60456 test program / Energy label program with Standard 60°C and max. spin speed and

function

LOAD

CONSUMPTION

2 kg 0.34 kWh 55L 30°C 1:00 h

4 kg 0.71 kWh 50L 40°C 1:10 h

4 kg 0.78 kWh 44L 40°C 1:18 h

7/8 kg 0.83 kWh 46.5L 40°C 1:38 h

7/8 kg 1.08 kWh 68L 40°C 1:46 h

4 kg 0.11kWh 25L 30°C 0:15 h

4 kg 0.34 kWh 30L 30°C 0:25 h

7/8 kg 0.78 kWh 50L 40°C 1:15 h

4 kg 0.3 kWh 50L 30°C 1:01h

WATER CONSUMPTION

TEMPERATURE

WASHING TIME

Intense

TECHNICAL DATA

TKW 1070

Power source

Max. working current (A) 10

Water pressure (MPa) 0.03≤P ≤1

Nominal load (kg) 7

Spinning speed (r/min) 1000

Washing programs 11

Max power (W) 2000

Dimensions (HxDxW mm)

Net weight (kg) 70

220 - 240V~/50Hz

850 x 600 x 595

SING THE

APPLIANC

WASHING METHODS

PLEASE NOTE

This washing machine is for domestic use only. If the machine is use for commercial purpose the guarantee will not be valid anymore.Do not use it for purposes other than that for which it was designed. Follow the instructions given on the label of each garment and wash only machine-washable garments.

POWER SUPPLY

Connect the washing machine to the power supply (220V to 240V~/50Hz).

WATER CONNECTION

Turn on the tap. The water must be clean and clear.

Note: Before use, check for leakage in the joints between the tap and the inlet hose by turning on the tap.

PREPARING THE LAUNDRY

¬ Sort out clothes according to fabric (cotton, synthetics, wool or silk) and to how dirty they are.

¬ Separate white clothes from coloured ones. Wash them ﬁ rst by hand to check if they fade or run.

¬ Empty pockets (keys, coins, etc.) and remove the harder decorative objects (e.g. brooches).

Attention: Small parts (like buttons, etc) may lead to repair work which user has to pay by themselves and can cause damage in the machine.

¬ Garments without hems, underwear, ﬁ nely woven textile such as ﬁ ne curtains are to be put into wash bag (it is better not to wash them in a washing machine).

¬ Close zippers and hooks, make sure the buttons are sewn on tightly and place small items such as socks, belts, bras, etc. in the wash bag.

Unfold large pieces of fabric such as bed sheets, bedspreads, etc.

¬ Turn shirts inside out.

SING THE APPLIANC

LOADING THE MACHINE

Open the washer door, put in the laundry piece by piece. Close the door tightly. ¬ When ﬁ rst using the washing machine, let it run unloaded for one program to prevent the laundry from being tainted by oil or dirty water from the washing machine. Before washing you should run the machine without laundry, but with detergent, with 60°C programm. ¬ Do not overload the washing machine.

SELECTING DETERGENT

The washing efﬁ ciency and the performance is determined by the quality of detergent used. Special nonfoaming detergent produces good washing results. Use speciﬁ c detergents for synthetic and woollen goods. Do not use dry cleaning agents such as trichloroethylene and similar products.

Note: Do not add more detergent than needed; otherwise, it may cause the situations as following and washing machine malfunction impacting washing machine’s life.

1.Due to the increasing foam, the rinse time will be longer than normal;

2.The foam may overﬂ ow from the detergent drawer because of the increasing pressure of the foam;

3.It may remain foam without cleaning out after the ﬁ nal spinning cycle. Recommendation:

1.Clean the detergent drawer once a week.

2.When using the prewashing program, please add half of the rating dosage.

3.Please follow the dosage recommendation on the powder or liquid detergent package.

ADDING DETERGENT

Slide out the detergent drawer and put the required detergent and softening agent into the corresponding compartments. Push back the drawer gently. (Refer to the instructions on the drawer)

Caution:

Delay

¬ For prewashing program, detergent should be added to both compartments 1 and 2. For other programs, do not add detergent to compartment 1.

¬ Use liquid detergent according to the instructions on its package. Do not use liquid detergent if the prewash mode or "Start delay" is selected.

¬ Do not overuse softener; otherwise, it will damage the artiﬁ cial ﬁ bers.

SELECTING PROGRAM

To get the best washing results, an appropriate washing program should be selected according to the laundry type. Please turn the program knob to select the right program.

SELECTING FUNCTIONAL

Select the required options. (Refer to the "Control panel" pages 08 and 09)

Delay

SETTING WASHING TEMPERATURE

SING THE

APPLIANC

Press and hold down the temperature button until the desired temperature is selected .

SETTING SPIN SPEED

Press and hold down the speed button until the desired speed is selected.See "Operational functions" on the "Control panel" pages (08 and 09) for selecting temperature and spin speed. It is advisable to select the recommended value.

WASHING

Press the Start/Pause button. The washing machine will operate according to the preset programs. The washing machine will stop operation automatically when a washing cycle ends. The "End" sign will appear on the display. Open the washer door and take out the laundry.

AFTER WASHING

Turn off the water supply and unplug the power cord. Open the washer door to prevent formation of moisture and odours. Let the door open while not used.

Delay

TIPS FOR SAVING ENERGY

Collect clothes for one full wash load.1. Avoid overloading the washing machine.2. Prewash only heavily soiled clothes.3. Reduce the amount of detergent or choose standard or delicate wash programs for slightly soiled clothes.4. Choose a proper washing temperature. Modern detergents can wash with very good result already in lower 5.

temperature than 60°C. Only use higher temperature than 60°C for heavily soiled laundry.

Follow the dosage recommendation on the detergent package to avoid using too much detergent.6.

SING THE APPLIANC

CARE CHART

Resistant material

Delicate fabric

Washable at 95 °C

Washable at 60 °C

Washable at 40 °C

Washable at 30 °C

Hand wash

Dry clean only

Wool Seal

LOAD REFERENCE

Bed sheet (single) Cotton Approximately 800g

Blanket Wool Approximately 3000g

Blended fabric clothes / Approximately 800g

Jackets Cotton Approximately 800g

Bleachable in cold water

Do not bleach

Iron at 200 °C

Iron at 150 °C

Iron at 100 °C

Don't iron

Dry cleaning with any solvent

Dry cleaning with pericloride

Dry cleaning with aviation fuel

Don't dry clean

Dry ﬂ at

Hung to dry

Dry on clothes hanger

Tumble dry, normal heat

Tumble dry, reduced heat

Don't tumble dry

Jeans / Approximately 800g

Overalls Cotton Approximately 950g

Ladies Pyjamas / Approximately 200g

Shirts / Approximately 300g

Socks Blended fabrics Approximately 50g

T-Shirts Cotton Approximately 300g

Underwear Blended fabrics Approximately 70g

AINTENAN

CLEANING & CARE

AFTER WASHING

Turn off the water supply and pull out electricity plug after each wash. Open the washer door to prevent formation of moisture and odours. If the washing machine is left idle for a long period, drain the water in the machine and replace the drain hose.

CLEANING THE DETERGENT DRAWER

Clean the detergent distribution drawer regularly.

Swing out the drawer, ﬂ ush it clean with water and then replace it.

CLEANING THE MACHINE

Unplug the machine during cleaning and maintenance. Use a soft cloth dampened with soap liquid to clean the machine case and rubber components. Do not use organic chemicals or corrosive solvents.

CLEANING THE FILTER

Clean the ﬁ lter once a month:

1. Open the bottom cover.

2.Remove the ﬁ lter by turning counterclockwise.

3.Flush the ﬁ lter clean with running water.

4.Replace the ﬁ lter by turning clockwise and remount the cover.

Caution:

1.The filter must be in place, or it may lead to leakage.

2.Place a container under the drain pump filter, to collect any excess water that may come out of the drain pump when the filter is removed.

WATER INLET VALVE AND INLET VALVE FILTER

To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve ﬁ lter regularly.

MOVING THE MACHINE

If the machine is to be moved to a distant location, replace the transportation bolts removed before installation to prevent damage as shown below.

Remove the blanking plugs.1. Remove the back cover2. Insert the synthetic stabilisers and the transportation bolts.3. Tighten the bolts with a spanner.4. Replace the back cover.5.

LONG PERIODS OF DISUSE

If the washing machine is left idle for a long period, pull out the electrical plug and turn off the water supply. Open the washer door to prevent formation of moisture and odours. Let the door open while not used.

Delay

AINTENAN

DISPLAY CODES

DISPLAY CODES AND SPECIAL FUNCTIONS

CODES

Err1 ¬ Door is not properly shut. _ Shut the door properly. Err2 ¬ Drainage error, water not emptied within 6

Err3 ¬ Temperature sensor not properly connected or

Err4 Err5 ¬Water level not met in 8 minutes.

Err7 ¬ Motor error. _ Contact the maintenance personnel. Err8 ¬ Water exceeds protective level. _ Contact the maintenance personnel. End ¬ End of wash cycle. 1:25 ¬The remaining time is 1 hour 25 minutes. 19:30 ¬Status information:Preset time for delayed operation.

UNb After the last rinsing cycle ﬁ nishes,spinning fails completely due to unbalance of the laundry.

CAUSES SOLUTIONS

_ Clean the ﬁ lter and check the drain hose for blockage. If error

minutes.

damaged. ¬ Heater error (Appears at the end of a cycle).

¬The height of the drain hose is below 80 cm.

¬ The drain hose is in water.

still exists, please contact the maintenance personnel. _ Contact the maintenance personnel.

_ Contact the maintenance personnel. _ Make sure that tap is turned on, and water pressure is normal.

If problem still exists, please contact the maintenance personnel.

_ Install drain hose within 80-100 cm of height.

_ Make sure the drain hose is not in water.

¬ Control panel lock function: Press the "Delay" and the "Start/Pause" buttons simultaneously for 3 seconds after starting a program. It can no longer be changed by operating buttons or knobs. To unlock press the "Delay" and "Start/Pause" buttons again for 3 seconds. ¬ Power-off memory function: In case of abrupt power failure or the need to cut off the power during a program cycle, the present settings will be saved and the preset operation will resume when the power is on again. ¬ To cancel a program Press the "Start/Pause" button, then switch off the power and the program is automatically cancelled. Turn the program selector again to choose another program.

1.Alarm sound can be cancelled if it is needed.Please follow the instruction as below: Switch on the washing machine and turn the program knob to spin cycle, then press the "Delay" and "Extra rinse" button, hold on for 3 seconds.The "bEEP OFF" will be displayed on the screen which indicates that alarm sound has been canceled. To operate the above steps again so the alarm sound can be recovered and the display will show "bEEP ON".

2.Note: During the spin process, if too much foam is inspected, in order to protect the motor, the washing machine will eliminate the foam automatically; the motor will stop and the drain pump will drain the water continuously for 90 seconds. If it happens more than 3 times, the motor will stop until the end of cycle without spinning.

AINTENAN

TROUBLESHOOTING

The following circumstances do not constitute problems. Do not contact the Service Center until the problem has been conﬁ rmed.

PROBLEM CAUSES SOLUTIONS

Washing machine fails to operate.

Washing machine cannot be ﬁ lled with water.

Machine is draining while being ﬁ lled.

Drainage failure. ¬ Drain hose is blocked.

Strong vibration while spinning.

Operation stops before completing wash cycle.

Operation stops for a period of time.

Excessive foam in the drum, which is spilled to the distribution drawer.

Automatic adjustment of the washing time.

Spinning fails ¬ Unbalance of the laundry _ Add clothes or run a spinning program again.

¬ Poor connection to the power supply. ¬ Power failure. ¬ The washer door is not properly closed. ¬ Machine has not been switched on.

¬ The "Start/Pause" button is not pressed. ¬ Water tap is not turned on. ¬ Water pressure is less than 0,03 Mpa. ¬ The inlet hose is kinked. ¬ Water supply failure. ¬ The program knob is not properly set. ¬ The washer door is not properly closed. ¬ The inlet hose ﬁ lter is blocked.

¬ The height of the drain hose is below 80 cm. ¬ The drain hose is in water.

¬ Drain hose end is higher than 100 cm above the ﬂ oor level. ¬ The ﬁ lter is blocked.

¬ Not all transportation bolts have been removed. ¬ Washing machine is located on an uneven surface or is not level. ¬ Machine load is over 7 kg.

¬ Water or electricity failure. _ Check the power supply.

¬ Washing machine gives an error message. ¬ Washing machine is in soaking cycle?

¬ The detergent is not a low-foaming type or for manual wash. ¬ Excessive use of detergent.

¬ The washing program duration will be adjusted _ This is normal and doesn't affect the

_ Check connection to the power supply. _ Check the power supply. _ Close the washer door properly. _ Make sure the machine is switched on.

_ press the "Start/Pause" button. _ Turn on the water tap. _ Check water pressure. _ Check the inlet hose. _ Ensure the water supply. _ Set the program knob properly. _ Close the washer door properly. _ Unblock the inlet hose ﬁ lter.

_ Install drain hose within 80-100 cm of height. _ Make sure the drain hose is not in water.

_ Unblock the drain hose. _ Make sure the drain hose end is lower than 100 cm above ﬂ oor level. _ Unblock the ﬁ lter.

_ Remove all transportation bolts. _ Make sure the washing machine is on an even surface and levelled. _ Reduce amount of laundry in the drum.

_ Check display codes. _ Press the rinse hood button or the Start/pause button again to cancel it.

_ Check if your detergent is appropriate. _ Reduce amount of detergent in the distribution drawer.

functionality.

WIRING CIRCUIT

WIRING CIRCUI

P11

PA14

P13

P12

FUSE

NTC

J3-5 J3-4 J4-3 J2-1 J2-2

J1-6

J1-5

J1-7

J1-1

J1-4

J1-2

J1-3

J3-2

MRL

MRN

MRC

J4-4

J4-1

J3-1

J3-3

2 1

EVF

EVP

PCB

J2-4J2-7J2-9

121

N G

FA1

FA3

M10

M5 M3

MOTOR

FUSE

Motor--------------Motor PCB----------------Printed Circuit Board MR------------------Door Lock R---------------------Heating Element PS-------------------Drainage Pump EVF,EVP-----------Water Inlet Magnetic Valve P----------------------Pressure Switch FA---------------------Interference Suppresser NTC------------------Temperature Sensor

Teka TKW 1070 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual