The temperature of accessible surfaces may be very high when the appliance is operating.
Never touch these parts, of apparatus, to avoid burning itself.
Make sure the appliance never comes into contact with flammable materials, such as
curtains, cloth, etc...& the power cord and plug do not come in contact with water.
Before cleaning, always unplug the appliance from the power supply and let it cool down.
This appliance is not intended to be operated by means of an external timer or
separate remote-control system.
Always place the unit on a flat surface. Ensure, also, not to cover the device and not to put
anything on it.
Always remove the plug from the wall socket when the appliance is not in use.
When using an extension lead always make sure that the entire cable is unwound from the
reel. Use solely CE approved extension leads. Input power must be at least 16A, 250V,
3000W.
Incorrect operation and improper use can damage the appliance and cause injury to the user.
This device complies with standards relating to this type of product.
(*)
Competent qualified person : after sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs.
USE
• Unroll the power cord completely.
• Check that the tension in force in the country where you are corresponds to that indicated
on the apparatus.
• Connect the apparatus in a correct socket-outlet, (and connected to the ground if the unit is
Class I), to avoid any danger.
• Disconnect the power source cable before any operation of cleaning of maintenance and
accessories assembly.
• Stand the appliance on a table or flat surface.
• Keep the raclette grill away 15cm, at least, from the wall or things, when cooking
• Never modify the appliance in anyway.
• Before plugging in your new Raclette / Cooking stone, check to see that the electric circuit is
not overloaded with other appliances. This unit should always be operated on a separate
220-240 volt, AC outlet which is able to supply min.16A
• Be certain that your unit is resting level on the countertop. Avoid using pans that are
unstable and easily tipped. Place pan under heating element.
• Turn the switch on 1 position. The pilot light will glow indicating the heating element is
energized and heating will begin immediately
• The metal surfaces will become hot. Do not touch while is use. When cooking is finished,
turn the thermostat back to « O » position.
• The surface is hot when using or before cooled. Never touch the appliance before it’s
cooled to avoid scald.
• If the hotplate is not to be in use for a long period of time, it is recommended to unplug unit
from the outlet. This helps to prevent accidental burns.