TEAC MJBTS1 User Manual

Model MJBTS-1

USER MANUAL

o Thank you for purchasing this product.
o Be sure to read this user manual before operating

the product and use it correctly.

o Store this manual in a safe place for future reference.

ENGLISH FRANÇAIS ESPAÑOL ITALIANO POLSKA DEUTSCH PORTUGUÊS

3D 08132 50A

IMPORTANT SAFETY PRECAUTIONS

CAUTION

o DO NOT REMOVE THE EXTERNAL CASES OR

CABINETS TO EXPOSE THE ELECTRONICS. NO USER
SERVICEABLE PARTS ARE WITHIN.

o IF YOU ARE EXPERIENCING PROBLEMS WITH THIS

CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.

The lightning flash with arrowhead
symbol, within an equilateral triangle, is

intended to alert the user to the pres­ence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.

The exclamation point within an equi-

lateral triangle is intended to alert the

user to the presence of important oper­ating and maintenance (servicing) instructions in
the literature accompanying the appliance.

PRODUCT, CONTACT THE RETAILER WHERE YOU
PURCHASED THE PRODUC T.

o TEAC FOR A SERVICE REFERRAL. DO NOT USE THE

PRODUCT UNTIL IT HAS BEEN REPAIRED.

o USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

IN USA, USE ONLY ON 120 V SUPPLY.

2

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in
accordance with this manual.

8) Do not install near any heat sources such as radi­ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.

9)

Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are pro­vided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replace­ment of the obsolete outlet.

10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience recep­tacles, and the point where they exit from the
apparatus.

11) Only use attachments/accessories specified by the
manufacturer.

12) Use only with the cart, stand, tripod,
bracket, or table specified by the man­ufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.

13) Unplug this apparatus during lightning storms or
when unused for long periods of time.

14) Stop use immediately when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the appara­tus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

<

The apparatus draws nominal non-operating power
from the AC outlet with its POWER or STANDBY/ON
switch not in the ON position.

<

The mains plug is used as the disconnect device,
the disconnect device shall remain readily operable.

CAUTION

< Do not expose this apparatus to drips or splashes.
< Do not place any objects lled with liquids, such as

vases, on the apparatus.

< Do not install this apparatus in a conned space

such as a book case or similar unit.

< The apparatus should be located close enough

to the AC outlet so that you can easily reach the
power cord plug at any time.

< If the product uses batteries (including a battery

pack or installed batteries), they should not be
exposed to sunshine, re or excessive heat.

WARNING

Products with Class construction are equipped with a
power supply cord that has a grounding plug. The
cord of such a product must be plugged into an AC
outlet that has a protective grounding connection.

The Bluetooth® word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of

such marks by Ryohin Keikaku Co. Ltd. is under license.

Android is a trademark of Google Inc.

iPhone is a trademark of Apple Inc., registered in the

U.S. and other countries.

IOS is a trademark or registered trademark of Cisco in

the U.S. and other countries and is used under license.

Other company names and product names in this

document are the trademarks or registered trademarks

of their respective owners.

3

B Precautions concerning batteries

Misuse of batteries could cause them to rupture

or leak leading to fire, injury or the staining of

nearby things. Please read and observe the fol-

lowing precautions carefully.

o Be sure to insert the batteries with correct

positive (+) and negative (_) orientations.

o If the remote control is not used for a long time

(more than a month), remove the batteries to

prevent them from leaking.

o If the batteries leak, wipe away the leakage

inside the battery compartment and replace

the batteries with new ones.

o Do not use batteries of types other than those

specified.

o Do not heat or disassemble batteries. Never

throw batteries into fire or water.

o Do not carry or store batteries with other

metallic objects. The batteries could short

circuit, leak or explode.

o Never recharge a battery unless it is confirmed

to be a rechargeable type.

4

For European Customers

Cd

Disposal of electrical and electronic equipment

(a) All electrical and electronic equipment should be disposed of separately from the municipal waste

stream via collection facilities designated by the government or local authorities.

(b) By disposing of electrical and electronic equipment correctly, you will help save valuable resources and

prevent any potential negative effects on human health and the environment.

(c) Improper disposal of waste electrical and electronic equipment can have serious effects on the environ-

ment and human health because of the presence of hazardous substances in the equipment.

(d) The Waste Electrical and Electronic Equipment (WEEE) symbol, which shows a wheeled bin that

has been crossed out, indicates that electrical and electronic equipment must be collected and

disposed of separately from household waste.

(e) Return and collection systems are available to end users. For more detailed information about

the disposal of old electrical and electronic equipment, please contact your city office, waste

disposal service or the shop where you purchased the equipment.

Disposal of batteries and/or accumulators

(a) Waste batteries and/or accumulators should be disposed of separately from the municipal waste stream

via collection facilities designated by the government or local authorities.

(b) By disposing of waste batteries and/or accumulators correctly, you will help save valuable resources and

prevent any potential negative effects on human health and the environment.

(c) Improper disposal of waste batteries and/or accumulators can have serious effects on the environment

and human health because of the presence of hazardous substances in them.

(d) The WEEE symbol, which shows a wheeled bin that has been crossed out, indicates that batter-

ies and/or accumulators must be collected and disposed of separately from household waste.

If a battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg),

and/or cadmium (Cd) as defined in the Battery Directive (2006/66/EC), then the chemical sym-

bols for those elements will be indicated beneath the WEEE symbol.

(e) Return and collection systems are available to end users. For more detailed information about the dis-

posal of waste batteries and/or accumulators, please contact your city office, waste disposal service or

the shop where you purchased them.

Pb, Hg,

ENGLISH

5

Wireless equipment precautions

Compliance of radio transmitter
and interference

USA model

This device complies with Part.15 of FCC Rules.

Operation is subject to the following two conditions:

1) This device may not cause interference

2) This device must accept any interference, including

interference that may cause undesired operation of

the device.

Labeling of authorization

FCC ID: XEG-MJBTS1

EEA (European Economic Area) model

This equipment complies with the harmonised stan-

dards of DIRECTIVE 1999/5/EC ( R&TTE )

Labeling of conformity

CE marking:

CAUTION

Changes or modifications not expressly approved by

the party responsible for compliance could void the

user’s authority to operate the equipment.

Radiation Exposure requirements

This equipment meets the regulation, which is recog-

nized internationally, for the case of human exposure

to radio waves generated by the transmitter.

Based on the following two conditions:

o End-users and installers must be provided with

antenna installation instructions and transmitter

operating conditions for satisfying RF exposure

compliance.

o This equipment should be installed and operated

with minimum distance 20 cm between the radiator

and your body.

Statement of compliance

USA model

This equipment complies with FCC radiation expo-

sure limits set forth for an uncontrolled environment

and meets the FCC radio frequency Exposure

Guidelines.

EEA (European Economic Area) model

This equipment complies with EN.62311; Assessment

of electronic and electrical equipment related to

human exposure restrictions for electromagnetic fields;

the harmonised standard of DIRECTIVE 1999/5/EC.

CAUTION

Authorization of wireless devices are different in

countries or regions. Please use only in the country

where you purchased the product.

o Depending on the country, restrictions on the

use of Bluetooth might exist.

Confirm the laws and regulations of the country or

region where you want to use the unit before use.

6

Information for interference
(FCC requirements)

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interfer-

ence in a residential installation.

This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will

not occur in a particular installation.

If this equipment does cause harmful interference

to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or

more of the following measures.

o Reorient or relocate the equipment and/or the

receiving antenna.

o Increase the separation between the equipment

and receiver.

o Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

o Consult the dealer or an experienced radio/T V

technician for help.

When using this unit with a mobile phone or other
Bluetooth devices, they should be no more than about
10 m apart. Depending on the circumstances of use,
however, the effective transmission distance might be
shorter.
Wireless communication with every device that sup­ports Bluetooth wireless technology is not guaranteed.

To determine the compatibility between this unit

and another device that supports Bluetooth wireless

technology, refer to that device's operation manual or
contact the shop where you purchased it.

ENGLISH

7

Table of contents

Before use

Wireless equipment precautions .....................6

Bluetooth® notes ....................................7

Before use ...........................................8

Names of parts .....................................10

Using the remote control ...........................11

Installing the wall-mounting plate ..................12

Attaching the unit ..................................13

Connecting the adaptor ............................13

Listening to audio from a Bluetooth device .........14

Listening to the radio ...............................18

Troubleshooting ....................................19

Specifications .......................................21

Included parts

If any of the included parts should be missing or dam-

aged, please contact the retailer where you purchased

the product.

Remote control × 1

CR2025 button cell lithium bat­tery for remote control × 1

(installed in remote control when

shipped new)

Wall-mounting plate × 1

Wood screws × 4

Dedicated AC adaptor × 1

For Europe For USA

or

User manual (this document) × 1

8