Taotronics TT-DL093 User Manual

TT-DL093_说明书

成品尺寸: 100*120mm
材质:128G铜版纸

MODEL: TT-DL093

TAOTRONICS LED DESK LAMP

User Guide

Product Diagram

Desk Lamp

① Lamp Head

② Night Light

③ Lamp Arm

④ Tension Adjuster

⑤ Power Port

⑥ 5V/2A iSmart USB port

⑦ Touch Panel

⑧ Wireless Charging Pad

Touch Panel

① Brightness Setting

② On / Off

③ Color Temperature –

④ Color Temperature +

⑤ Favorite

⑥ Timer

⑦ Night Light

⑧ Wireless charging LED indicator

1

3

5 6

2

4

• 1 x TaoTronics LED Desk Lamp (Model: TT-DL093)

• 1 x Power Adapter

• 1 x Cleaning Cloth

• 1 x User Guide

• 1 x Warranty Card

Package Contents

How to Use

1. On / Off

The On / Off LED indicator will light up when the lamp is connected with power.

Tap the button to turn on the lamp and the touch panel. Tap again to turn off.

The TT-DL093 Desk Lamp includes a brightness and color temperature memory

function; it will directly activate the previous settings each time it’s turned on.

2. Brightness Adjustment

To adjust the brightness, tap or slide across the Brightness Setting icons from the

left (least bright) to the right (most bright).

Model

Input

USB Output

8

7

LED Power

Wireless Charging

Output

⑧

Color Temperature

CRI

TT-DL093

12V / 3A

DC 5V / 2A

10W Max

5W/7.5W for iphone Max / 10W for

Samsung Max

2900K+/-175K

3300K+/-175K

3700K+/-175K

4100K+/-175K

4500K+/-175K

>80

3. Color Temperature Adjustment

Press the or button to go through the 5 levels of color temperature. The

indicator will flash 3 times when it reaches the highest or the lowest setting.

4. Timer Function

When the lamp is on, tap the button and the indicator will slowly flashes 3

times to start timing. The lamp will automatically turn off in 60 minutes. Tap again

in timer mode to cancel the timer setting. The LED indicator will flash once.

5. Favorite Function

When the lamp is on, tap and hold the button for 2 seconds. The indicator will

flash 3 times and the current color temperature and brightness will be set as your

favorite. Each time the lamp is turned on, tap on the button once to activate

your favorite setting. Tap and hold again for 2 seconds to erase and set a new

favorite.

to light up the night light. Tap either the button or the button to turn off

the night light. In Night Light mode, tap the button to set or cancel the 60

minute timer.

Note: The night light and main lamp will not light up at the same time.

7. Wireless Charing

Place your phone with wireless charging functionality onto the charging pad,

charging will start automatically.

Wireless charging LED Definitions

LED Indicators

Turns on blue for 10 seconds

Turns off

Blinks blue

Turns solid blue

Flashes red

Status

Connected to Power

In standby mode

Charging a device

Device fully charged

Error, device not recognized

Note:

If charging does not occur, adjust the phone

so its receiver can be detected. Please note that

different model phones have their receivers in

different positions.

6. Night Light Function

When the lamp is on, tap the button until the indicator slowly flashes 3 times