TT-DL050 UM_说明书
成品尺寸: 100*120mm
材质:128G铜版纸
www.taotronics.com
TAOTRONICS LED DESK LAMP
User Guide
Product Diagram
Desk Lamp
① Lamp Head
② Night Light
③ Lamp Arm
④ Tension Adjuster
⑤ Power Port
⑥ 5V/2A iSmart USB port
⑦ Touch Panel
⑧ Wireless Charging Pad
Touch Panel
① Brightness Setting
② On / Off
③ Color Temperature –
④ Color Temperature +
⑤ Favorite
⑥ Timer
⑦ Night Light
3
5 6
2
1
4
• 1 x TaoTronics LED Desk Lamp (Model: TT-DL050)
• 1 x Power Adapter
• 1 x Cleaning Cloth
• 1 x User Guide
Specications
Package Contents
Model
Input
USB Output
8
7
LED Power
Wireless Charging
Output
Color Temperature
CRI
TT-DL050
12V / 3A
DC 5V / 2A
12W Max
7.5W for iphone Max / 10W for
Samsung Max
2700-3000K, 3000-3500K, 4000-4500K,
5000-5500K,6000-6500K
>80
How to Use
1. On / Off
The On / Off LED indicator will light up when the lamp is connected with
power. Tap the button to turn on the lamp and the touch panel. Tap
again to turn off. The TT-DL050 Desk Lamp includes a brightness and color
temperature memory function; it will directly activate the previous settings
each time it’s turned on.
2. Brightness Adjustment
To adjust the brightness, tap or slide across the Brightness Setting icons from
the left (least bright) to the right (most bright).
3. Color Temperature Adjustment
Press the or button to go through the 5 levels of color temperature.
The indicator will ash 3 times when it reaches the highest or the lowest
setting.
4. Timer Function
When the lamp is on, tap the button and the indicator will slowly ashes
3 times to start timing. The lamp will automatically turn off in 60 minutes. Tap
again in timer mode to cancel the timer setting. The LED indicator will ash
once.
6. Night Light Function
When the lamp is on, tap the button until the indicator slowly ashes 3
times to light up the night light. Tap either the button or the button
to turn off the night light. In Night Light mode, tap the button to set or
cancel the 60 minute timer.
Note: The night light and main lamp will not light up at the same time.
7. Wireless Charing
Place your phone with wireless charging functionality onto the charging pad,
charging will start automatically.
Note:
If charging does not occur, adjust the phone so its receiver can be detected.
Please note that different model phones have their receivers in different
positions.
5. Favorite Function
When the lamp is on, tap and hold the button for 2 seconds. The
indicator will ash 3 times and the current color temperature and brightness
will be set as your favorite. Each time the lamp is turned on, tap on the
button once to activate your favorite setting. Tap and hold again for 2
seconds to erase and set a new favorite.
Loading...