Taotronics DOTR1063 142934-2830569-55-97000-007-UL

File E219869

Project 4789796250

0000-00-00

REPORT

on

Fans, Electric

GD Midea Environment Appliances Mfg Co Ltd

Guangdong, China

Copyright  2021 UL LLC

UL LLC authorizes the above named company to reproduce this Report only for
purposes as described in the Conclusion, provided it is reproduced in its
entirety.

File E219869 Vol. 1 Sec. 70 Page 1 Issued: 0000-00-00

Model

Overall

Size

USL/CNL

VAC

Hz A 1 2 3 4 5 6 7

FZ10-21ZRD

1075 mm x

324 mm

USL/CNL

120

60

0.35

x x x x x x x

Model

8 9 10

11

12

13

14

15

16

17

18

19

20

21

22

FZ10-21ZRD

x x x x x x x x x x x x x x x

Model

23

24

25

26

27

28

29

30

31

32

33

34

35

36A

36B

37

FZ10-21ZRD

x x x x x x x x x x x x x x x

and Report

DESCRIPTION

PRODUCT COVERED:

Household Electric Fan, Models FZ10-21ZRD, TT-TF003

See Table 1 for other details of the products covered in this report.

CONSTRUCTION DETAILS:

Refer to Sec. Gen. for additional details.

TABLE 1 - MODELS COVERED, RATINGS AND REFERENCE COMPONENT LIST:

324 mm x

TABLE 1 Cont.

TABLE 1 Cont.

or

Model Similarity:

Model TT-TF003 is identical to model FZ10-21ZRD except model designation.

File E219869 Vol. 1 Sec. 70 Page 2 Issued: 0000-00-00

Current

Alternate (These corresponding models are identical to each other
except for model designation)

-

-

Note:

-

-

General Product Information:

[x] The fans are intended for household indoor use only.

in. (3 mm) away from any plastic that is rated HB or V-2.

MARKINGS:

Note: In Canada, there are two official languages, English and French. For

number.

SAFETY AND INSTALLATION INSTRUCTIONS:

reference to illustration number.

and Report

TABLE 2 - IDENTICALMODELS:

TABLE 3- MODEL DESIGNATIONS (Applies to TABLE 1 and TABLE 2):

TECHNICAL CONSIDERATIONS (NOT FOR FIELD REPRESENTATIVE'S USE):

[x] The fans have not been evaluated for use with solid-state speed control

device.
[X] The fans are provided with an automatic oscillation feature.
[x] The fans are not intended for use in unattended areas.
[x] The fans are provided with supply connections spaced a minimum of 0.118

product intended to be used in Canada, all markings shall be in English and
French.
See Sec. Gen, For details. Refer to Table 6 for reference to illustration

Each fan is provided with an instruction/user’s manual. Refer to Table 6 for

File E219869 Vol. 1 Sec. 70 Page 3 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F2

1(7)

Display

Various

Various

Rated HB, 50°C

adhesive.

QMFZ2

F2 2

Front

LG CHEM LTD

HI121H

ABS, all color,

dimension.

QMFZ2/8

F2

3

Right

Various

Various

Rated HB, 50°C

losure

snap fit.

QMFZ2

and Report

TABLE 4 – COMPONENTS:

ILL

No.

(6)

Description

Panel

Enclosure

No

minimum,
measured
thickness 1.0
mm. Secured to
front enclosure
by double-sided

HB, 95°C,
measured
thickness 2.3
mm. Provided
with integral
molded Guard,
The horizontal
line of Guard
measured 2.0 mm
thick, the
vertical line
is 2.0 mm.
Provided with
ventilation
openings of 6.8
mm in minor

CCN(s)/
Approval

E67171

(23)

Enclosure

minimum,
measured
thickness 2.6
mm. Secured to
front enc
and rear
enclosure by

File E219869 Vol. 1 Sec. 70 Page 4 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F3

4

Left

LG CHEM LTD

HI121H

ABS, all color,

front enclosure

snap fit.

QMFZ2/8

F3 5

Rear

LG CHEM LTD

HI121H

ABS, all color,

fit.

QMFZ2/8

and Report

TABLE 4 – COMPONENTS:

ILL

No.

(3)

Description

Enclosure

No

HB, 95°C,
measured
thickness 2.6
mm. Provided
with integral
molded Guard,
The horizontal
line of Guard
measured 2.3 mm
thick, the
vertical line
is 2.8 mm.
Provided with
openings of
max. 5.0 mm in
minor
dimension.
Secured to

and rear
enclosure by

CCN(s)/
Approval

E67171

(17)

Enclosure

HB, 95°C,
measured
thickness 2.1
mm. Secured to
front enclosure
and wind
channel by
screws and snap

E67171

File E219869 Vol. 1 Sec. 70 Page 5 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F3 6

Rear Cover

LG CHEM LTD

HI121H

ABS, all color,

screw.

QMFZ2/8

and Report

TABLE 4 – COMPONENTS:

ILL

No.

(18)

Description

No

HB, 95°C,
measured
thickness 2.1
mm. Provided
with integral
molded Guard,
The horizontal
line of Guard
measured 2.6 mm
thick, the
vertical line
is 2.6 mm.
Provided with
openings of
max. 7.0 mm in
minor
dimension.
Secured to rear
enclosure by

CCN(s)/
Approval

E67171

File E219869 Vol. 1 Sec. 70 Page 6 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F3

7

Power

Various

Various

SPT-2-R, 18 AWG

relief means.

ELBZ/7

Various

Various

For CNL only.

means.

ELBZ7

and Report

TABLE 4 – COMPONENTS:

ILL

No.

24.11

(

Description

)

Supply Cord

No

CCN(s)/
Approval

× 2C, 300 V,
VW-1, minimum
60°C,
terminated in
2-wire
polarized
attachment
plug, NEMA
Config. 1-15P.
Provided with a
removeable fuse
cover, and an
UL listed
(JDYX/7) or
recognized
(JDYX2/8) fuse
that rated 2.5
A or 5 A max.
Length 1.5-3.0
m for USL
product; 1.8-

3.0 m for CNL
product.
Provided with
integral molded
bushing served
as strain

SPT-2, 18 AWG ×
2C, 300 V, VW­1, minimum
60°C,
terminated in
2-wire
polarized
attachment
plug, NEMA
Config. 1-15P.
Length 1.8-3.0
m. Provided
with integral
molded bushing
served as
strain relief

File E219869 Vol. 1 Sec. 70 Page 7 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

-

8(-)

Marking

Various

Various

Suitable for

at least 60°C.

PGDQ2/8

F3

9(-)

Cord Tag

Various

Various

Suitable for

plug.

PGIS2
F4

10

Control

Various

Various

Rated HB, 50°C

snap fit.

QMFZ2

F4

11

Base

LG CHEM LTD

HI121H

ABS, all color,

Nut.

QMFZ2/8

and Report
TABLE 4 – COMPONENTS:

ILL

No.

(1)

Description

Label
(not shown)

Panel

No

application
surface, rated

SPT-2-R
flexible cord,
rated at least
60°C. It should
be located not
more than 152.4
mm) from the
attachment

minimum,
measured
thickness 2.5
mm. Secured to
front enclosure
and rear
enclosure by

CCN(s)/
Approval

or
PGJI2/8

(

26

25,

)

HB, 95°C,
measured
thickness 2.2
mm. Two pieces
fastened
together by
snap fit.
Overall size:
324 mm OD x 50
mm High.
Secured to
oscillating
supporting
cover by Lock

E67171

File E219869 Vol. 1 Sec. 70 Page 8 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F4

12

Lock Nut

Various

Various

Rated HB, 50°C
minimum.

QMFZ2

F4/

13

Strain

SILVER AGE

730

PVC, V-0,

dimensions.

QMFZ2/8

F8

14

Lens

Various

Various

Two provided.

snap fit.

QMFZ2
F8

15

Decorative

Various

Various

Rated HB, 50°C

snap fit.

QMFZ2

F9

16

Shaft

Various

Various

Rated HB, 50°C

mm.

QMFZ2

F10

17

Wind

Various

Various

Rated HB, 50°C

mm.

QMFZ2

and Report

TABLE 4 – COMPONENTS:

ILL

I2

No.

(27)

(-)

(14)

15,

(

22

)

Description

Relief
Means

Cover

ENGINEERING
PLASTICS
(DONGGUAN)
CO LTD

No

50°C. Molded
integrally with
power supply
cord. Refer to
Ill. for

rated HB, 50°C
minimum,
measured
thickness 2.1
mm. Secured to
front enclosure
and rear
enclosure by

minimum,
measured
thickness 2.2
mm. Secured to
front enclosure
and rear
enclosure by

CCN(s)/
Approval

E225348

(

(

16.1

16.2

)

Sleeve

)

Channel

minimum,
measured min.
thickness 1.2

minimum,
measured
thickness 2.3

File E219869 Vol. 1 Sec. 70 Page 9 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F10

18

Impeller

LG CHEM LTD

HI121H

ABS, all color,

a screw.

QMFZ2/8

F10

19

Fan Motor

Various

Various

Painted or

screws.

-

F10

20

Baffle

Various

Various

Rated HB, 50°C

screws.

QMFZ2

and Report

TABLE 4 – COMPONENTS:

ILL

No.

16.3

(

16.4

(

Description

)

)

Bracket

No

HB, 95°C,
Overall
dimensions:
diameter 91.0
mm and length

486.0 mm.
It include two
parts: blade
and blade
bracket, blade
measured
thickness in
range of 0.5 to

1.6 mm, blade
bracket
measured
thickness 3.0
mm. Secured to
motor shaft by

plated metal,
measured
thickness 1.0
mm. Secured to
wind channel by

CCN(s)/
Approval

E67171

(

16.6

)

minimum,
measured
thickness 1.5
mm. Secured to
wind channel
and front
enclosure by

File E219869 Vol. 1 Sec. 70 Page 10 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F10

21

Internal

Various

Various

Minimum 300 V,

sync. motor.

AVLV2/8

F10

22

Internal

Various

Various

Minimum 300 V,

between PWB.

AVLV2/8

F11

23

Electrical

KINGFA SCI &

PP-R0 508

PP, all color,

screws.

QMFZ2/8

F11

24

Quick

Various

Various

250 VAC, minimum

Cord.

ECBT2/8

F12

25

Cable Tie

Various

Various

At least 85 °C.

Internal Wiring.

ZODZ2/8

and Report

TABLE 4 – COMPONENTS:

ILL

No.

(-)

(-)

10,

(

12

)

Description

Wire

Wire

Box

TECH CO LTD

No

80°C, VW-1, 22
AWG. Used for
connection of
fan motor and

80°C, VW-1, 26
AWG.
Used for
connection of

V-0, 5VA, 120°C.
Measured
thickness 2.0
mm. The overall
size of the
enclosed PWB:

99.3 mm length x

57.8 mm width x

36.5 mm high.
Two pieces
fastened
together by snap
fit.
Secured to front
enclosure by

CCN(s)/
Approval

E171666

(-)

(-)

Connector

2 A, Operating
Temperature
65°C. Suitable
for size and
number of
conductors
involved. Used
for the
connection of
the Power Supply

Provided for the
securement of

File E219869 Vol. 1 Sec. 70 Page 11 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F12

26

Fiber Glass

Various

Various

Silicone coated

VW-1.

UZFT2/8

F13

27
(

)

Hinge Bar

Various

Various

Rated HB, 50°C
minimum.

QMFZ2

F13

28

Oscillating

Various

Various

Painted or

mm.

-

F13

29

Sync. Motor

THE

AW564

PP, all color,

by screws.

QMFZ2

F13

30

Oscillating

KINGFA SCI &

PA66-G(f)

PA66, all

and Cover.

QMFZ2/8

F13

31

Cover

Various

Various

Rated HB, 50°C

screws.

QMFZ2

F13

32

Oscillating

LG CHEM LTD

HI121H

ABS, all color,

screws.

QMFZ2/8

and Report

TABLE 4 – COMPONENTS:

ILL

No.

(-)

24.4

24.6

(

24.8

(

24.9

(

Description

Sleeving

)

Arm

)

Bracket

)

Supporting

POLYOLEFIN
CO
(SINGAPORE)
PTE LTD

TECH CO LTD

No

fiberglass
sleeving, 600
V, 200 °C,

plated metal,
measured
thickness 1.5

HB, 65°C,
measured
thickness 2.0
mm. Secured to
front enclosure

color, HB,
105°C, measured
thickness 2.3
mm. Sandwiched
between Sync.
Motor Bracket

CCN(s)/
Approval

E108370

E171666

(

(

24.10

24.12

)

)

Supporting
Cover

minimum,
measured
thickness 2.2
mm. Secured to
Sync. Motor
Bracket by

HB, 95°C,

E67171
measured
thickness 2.5
mm. Secured to
Oscillating
Supporting by

File E219869 Vol. 1 Sec. 70 Page 12 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F15,

33

PWB

Various

Various

Measured 1.6 mm

and PCB Layer.

ZPMV2

and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

F16,
F17,
F18/
I3

No.

2,5,

(

8, 13

Description

)

No

CCN(s)/
Approval

thick. minimum
V-2, 105°C,
suitable for
Direct Support
of Current­carrying Parts.
Refer to ILL.
for Schematic
circuit diagram

File E219869 Vol. 1 Sec. 70 Page 13 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F11

34

Class 2

- - Input: 110-120

following:

-

F14/

34.1

PWB

Various

Various

1.6 mm thick.

and PCB Layer.

ZPMV2

F14

34.2

Current

Various

Various

Rated 250 V,

A.

JDYX/7

JDYX2/8

F14

34.3

Varistor

Various

Various

Rated 560 V.

VZCA2/8

F14

34.4

X Capacitor

Various

Various

Rated 100 nF,
minimum 250 V.

FOWX2/8

F14

34.5

Y Capacitor

Various

Various

Rated 2200 pF,

Two provided.

FOWX2/8
F14

34.6

Diode (D1,
D2, D3, D4)

Various

Various

1000 V, 1.5 A.

-

F14

34.7

IC (IC1)

On-Bright

Co., Ltd.

OB2263

- - F14

34.8

Electrolyti

(EC1, EC2)

Various

Various

Rated 33 µF,

-

F14

34.9

Electrolyti

(EC4)

Various

Various

Rated 1000 µF,

­F14

34.10

MOSFET
(Q1)

Various

Various

800 V, 10 A.

-

and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

I4

No.

(11)

Description

Power Unit

No

CCN(s)/

Approval

V ac, 60 Hz.
Output: 24 V
dc, 1.5 A.
All components
are
mechanically
secured before
soldering.
Consist of

overall 93.2 by

52.2 mm. Rated
V-0, 130°C,
suitable for
Direct Support
of Current­carrying Parts.
Refer to ILL.
for Schematic
circuit diagram

Fuse

c Capacitor

c Capacitor

Electronics

2.5 A or 3.15

minimum 250 V.

450 V, 105 °C.

35 V, 105 °C.

or

File E219869 Vol. 1 Sec. 70 Page 14 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F14

34.11

Diode (D7)

Various

Various

150 V, minimum 5 A.

-

F14

34.12

Heat Sink

Various

Various

Aluminum Alloy, type L,

(Q1).

-

F14

34.13

Optical

(IC2)

Various

Various

Isolation voltage:

FPQU2/8
F14

34.14

NTC

Various

Various

Rated minimum 120 V,
3 A.

XGPU2/8

F14

34.15

Choke (L1)

Various

Various

Rated 1 mH, 0.35 A.

1, minimum 105ºC, 300 V.

-

F14

34.16

Choke (L2)

Various

Various

Rated 10 uH, 0.5 A.

diameter 0.5 mm.

-

F14

34.17

Choke (L3)

Various

Various

Rated 1.5 mH, 2000 mA.

thickness 1.0 mm.

-

and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

No.

Descriptio
n

Coupler

No

CCN(s)/
Approval

min. 2.0 mm thick,
measured 22.1 mm length,

22.1 mm wide, 22.3 mm
high. Used for MOSFET

minimum 5000 Vac.

Consist of following:
a. Core – Ferrite,
overall 10.0 mm OD by

16.0 mm H.
b.Windings – R/C(OBMW2),
Polyurethane enameled
copper wire, winding
diameter 0.4 mm.
c. Tubing –
R/C(YDPU2/8), Rated VW-

Consist of following:
a. Core – Ferrite,
overall 6.0 mm OD by

10.0 mm H.
b.Windings – winding

Consist of following:
a. Core – Ferrite,
overall 10.2 mm OD by

5.8 mm ID by 5.4 mm
high.
b. Windings –
R/C(OBMW2), Polyurethane
enameled copper wire,
winding diameter 0.5 mm.
c. Base - R/C(QMFZ2),
model T375J (E59481),
rated V-0, 150°C , minimum

File E219869 Vol. 1 Sec. 70 Page 15 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F14/

34.18

LVLE

Dongguan

EE28-940uH

Refer to Ill. for

1.

-

F14/

34.18

Guangzhou

Ltd

MD-

Same construction as

­F14/

34.18

FOSHAN

CO., LTD.

HYT0144/C

Same construction as

Ill. for Specification.

-

and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

I5A

No.

A

Description

Transformer
(TR1)

City Wei Mei
Electronics
Factory

No

CCN(s)/
Approval

Specification.
Consist of following:

a. Core – Ferrite, E-E

type, overall 28.6 mm
length by 10.8 mm width
mm by 20.2 mm high.
Wrapped with three
layer of insulation
tape.

b. Bobbin – Two flange,

R/C(QMFZ2), model
T375HF or T375J
(E59481), rated V-0,
150 °C, minimum
thickness 1.2 mm.

c. Primary Winding –

R/C(OBMW2),
Polyurethane enameled
copper wire. See ILL.
for winding
information.

d. Secondary Winding –

R/C(OBJT2), Reinforced
insulation wire, Rated
minimum 130 ºC. See
ILL. for winding
information.

e. Varnish – R/C (OBOR2),

rated minimum 130 °C.

f. Insulation Tape - R/C

(OANZ2), rated 130ºC,
minimum 0.03 mm thick
per layer.

g. Tubing - R/C (YDPU2),

min. 150 V, 200 °C, VW-

I5B

I5C

B

C

Delong
Electronic
Devices Co.,

SHUNDE UM
ELECTRONICS

EE2820V­940uH

E28

above except
manufacturer. Refer to
Ill. for Specification.

above except
manufacturer. Refer to

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F12/

35

Fan Motor

GD Midea

ZSFE-12-

24 VDC, 20 W,

following:

-

F19

35.1

Enclosure

Various

Various

Galvanized steel

thick.

-

F19

35.2

Stator

Various

Various

Steel Lamination

mm high.

-

F19

35.3

Shaft

Various

Various

Steel, 8.0 mm in

length.

-

F19

35.4

Winding

Various

Various

Epoxy Powder

thickness 0.3 mm.

QMFZ2

F19

35.5

Magnet Wire

Various

Various

Polyurethane

for each group.

OBMW2

File E219869 Vol. 1 Sec. 70 Page 16 Issued: 0000-00-00
and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

I6

No.

16.5

(

Description

)

Insulation

Environment
Appliances
MFG. Co.,
Ltd.

No

10-10

Class A. Refer to
Ill. for
dimensions.
Consist of

sheet, 1.0 mm

(Stack), overall
size 48.0 mm
diameter x 12.0

diameter, 60.0 mm

Coating, all
color, 130 °C,
measured

CCN(s)/
Approval

E50219

enameled copper
wire, varnish
impregnated,
rated minimum
130 °C. Main
winding diameter

0.45 mm,
resistance 2.1 Ω

File E219869 Vol. 1 Sec. 70 Page 17 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F19

35.6

PWB

Various

Various

Measured diameter

Layer.

ZPMV2

F19

35.7

Fuse (FS1)

Various

Various

Rated 3 A,
32 VDC.

JDYX2/8

F19

35.8

Driver IC

FORTIOR

Co., Ltd.

FU6831

-

-

and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

/I7

No.

Description

(U1)

Technology
(Shenzhen)

No

QFN48

CCN(s)/
Approval

66.8 mm, 1.6 mm
thick. Rated
minimum V-0,
105 °C. Refer to
ILL. for
Schematic circuit
diagram and PCB

File E219869 Vol. 1 Sec. 70 Page 18 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F13/

36A

Synchronous

Foshan

TYJ50-8

24 V, 50 Hz,

screws.

-

F20A

36A.1

Cover

Various

Various

Galvanized

thick.

-

F20A

36A.2

Enclosure

Various

Various

Zinc coated

metal tabs.

-

F20A

36A.3

Gear

Various

Various

Galvanized

thick.

-

F20A

36A.4

Bobbin

BASF SE

B4406 G6

PBT, all color,

the Enclosure.

QMFZ2/8

F20A

36A.5

Winding

Various

Various

Polyurethane

110 Ohms

OBMW2

and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

I8A

No.

Description

Motor

24.2

(

)

Shunde
Hengxing
Micro Motor
Co., Ltd.

No

CCN(s)/

Approval

2.5 RPM, 4 W.
Refer to Ill.
for dimensions.
Secured to
Sync. Motor
Bracket by

sheet steel,
measured 0.8 mm

steel. Measures
50 mm diameter
by 20.6 mm deep
by 0.8 mm
thick.
Enclosure and
Cover secured
together by

Mounting
Plate

sheet steel,
measured 0.8 mm

V-0, min.

E41871
100°C, measured

1.0 mm thick.
Physical fit to

enameled copper
wire, varnish
impregnated,
rated 130°C.
Wire Size: 0.15
mm.
DC Resistance:

File E219869 Vol. 1 Sec. 70 Page 19 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F20A

36A.6

Rotor

Various

Various

Permanent

plastic gear.

-

F20A

36A.7

Shaft

Various

Various

Steel, 7.0 mm

25.2 mm length.

-

F20A

36A.8

Leads

Various

Various

Minimum 300 V,

Connector.

AVLV2/8

F20A

36A.9

Pin

Various

Various

Copper. Two

mm high.

-

F20A

36A.10

Terminal

BASF SE

B4406 G6

PBT, all color,

snap fit.

QMFZ2/8

F20A

36A.11

Connector

Various

Various

250 VAC,

65°C.

ECBT2/8

and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

No.

Description

Terminals

No

CCN(s)/

Approval

magnet ring,
measured 25 mm
OD by 8 mm
height.
Provided with
integral

in diameter,

80°C, 24 AWG,
crimp with
terminals on

provided.
Integral molded
in the flat
flange on
Bobbin. Each
overall
measures 6.5
length by 3.2
mm width by 6.0

Cover

V-0, min.

E41871
100°C, measured

0.7 mm thick.
Secured to
Bobbin and
Connector by

minimum 2 A,
Operating
Temperature

File E219869 Vol. 1 Sec. 70 Page 20 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F13/

36B

Alternative

NINGBO

MTY21-203

24 V, 50 Hz,

screws.

-

F20B

36B.1

Cover

Various

Various

Galvanized

thick.

-

F20B

36B.2

Enclosure

Various

Various

Zinc coated

metal tabs.

-

F20B

36B.3

Gear

Various

Various

Galvanized

thick.

-

F20B

36B.4

Bobbin

BASF SE

B4406 G6

PBT, all color,

the Enclosure.

QMFZ2/8

F20B

36B.5

Winding

Various

Various

Polyurethane

110 Ohms

OBMW2

and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

I8B

No.

Description

Synchronous
Motor

24.2

(

)

MINGSHENG
MOTOR
TECHNOLOGY
CO., LTD.

No

CCN(s)/

Approval

2.5 RPM, 4 W.
Refer to Ill.
for dimensions.
Secured to
Sync. Motor
Bracket by

sheet steel,
measured 1.0 mm

steel. Measures

49.2 mm
diameter by

21.5 mm deep by

0.8 mm thick.
Enclosure and
Cover secured
together by

Mounting
Plate

sheet steel,
measured 0.8 mm

V-0, min.

E41871
100°C, measured

0.8 mm thick,
Physical fit to

enameled copper
wire, varnish
impregnated,
rated 130°C.
Wire Size: 0.15
mm.
DC Resistance:

File E219869 Vol. 1 Sec. 70 Page 21 Issued: 0000-00-00

FIG

Item

Component

Manufacturer

Type/Model

Rating, Comment

UL

Agency

F20B

36B.6

Rotor

Various

Various

Permanent

plastic gear.

-

F20B

36B.7

Shaft

Various

Various

Steel, 7.0 mm

26.2 mm length.

-

F20B

36B.8

Leads

Various

Various

Minimum 300 V,

Connector.

AVLV2/8

F20B

36B.9

Pin

Various

Various

Copper. Two

mm high.

-

F20B

36B.10

Terminal

BASF SE

B4406 G6

PBT, all color,

snap fit.

QMFZ2/8

F20B

36B.11

Connector

Various

Various

250 VAC,

65°C.

ECBT2/8

F1

37

Remote

Guangdong

Co., LTD.

SRC-0705

Rated 3 V dc,

details.

-

and Report

TABLE 4 – COMPONENTS - CONTINUED:

ILL

No.

Description

Terminals

No

CCN(s)/

Approval

magnet ring,
measured 25.0
mm OD by 8.0 mm
height.
Provided with
integral

in diameter,

80°C, 24 AWG,
crimp with
terminals on

provided.
Integral molded
in the flat
flange on
Bobbin. Each
overall
measures 3.8 mm
length by 2.6
mm width by 4.5

Cover

Control
(Optional)

TIANQIU
Electronics
Technology

V-0, min.

E41871
100°C, measured

0.6 mm thick.
Secured to
Bobbin and
Connector by

minimum 2 A,
Operating
Temperature

refer to file
E219869, Vol.
1, sec. 69 for

FIG. No.

Description

Model

1

Disassembled view

FZ10-21ZRD

2,3,4

External view

FZ10-21ZRD

5 to 13

Internal view

FZ10-21ZRD

14

View of Class 2 Power Unit

FZ10-21ZRD

15

View of Control Board

FZ10-21ZRD

16

View of Display Board

FZ10-21ZRD

17

View of Transfer Board

FZ10-21ZRD

18

View of Lamp Board

FZ10-21ZRD

19

View of Fan Motor, model ZSFE-12-10-10

FZ10-21ZRD

20A

View of Sync. Motor, model TYJ50-8

FZ10-21ZRD

20B

View of Sync. Motor, model MTY21-203

FZ10-21ZRD

ILL. No.

Description

Model

1

Exploded Drawing (for reference only)

FZ10-21ZRD

2

Dimensional Drawing of Strain Relief Means

FZ10-21ZRD

3

Schematic circuit diagram and PCB Layer of

Board and Lamp Board

FZ10-21ZRD
4

Schematic circuit diagram and PCB Layer of
Class 2 Power Unit

FZ10-21ZRD

5A

Specification of LVLE Transformer (TR1) of
model EE28-940uH

FZ10-21ZRD

5B

Specification of LVLE Transformer (TR1) of
model MD-EE2820V-940uH

FZ10-21ZRD

5C

Specification of LVLE Transformer (TR1) of
model HYT0144/C E28

FZ10-21ZRD

6

Dimensional Drawing of Fan Motor of model
ZSFE-12-10-10

FZ10-21ZRD

7

Schematic circuit diagram and PCB Layer of
Fan Motor, model ZSFE-12-10-10

FZ10-21ZRD

8A

Dimensional Drawing of Sync. Motor of
models TYJ50-8

FZ10-21ZRD

8B

Dimensional Drawing of Sync. Motor of
models MTY21-203

FZ10-21ZRD
9

Nameplate Marking (for reference only)

FZ10-21ZRD

10

Cord Tag Markings

FZ10-21ZRD

11

User Manual

FZ10-21ZRD

File E219869 Vol. 1 Sec. 70 Page 22 Issued: 0000-00-00
and Report

TABLE 5 – FIGURES:

TABLE 6 - ILLUSTRATIONS:

Control Board, Display Board, Transfer