Suprema DSMOC User Manual

Download

www.suprema.co.kr

Innovative Fingerprint Terminal

Installation Guide

(ver0.1)

Product Contents

n Basic Contents

Product Contents

DStationTerminal Wall mounting metal bracket

3P, 9P, 4P, 4P, 8P, 7P,5PCable – 1EA

Screw for fixing main body

Wallmounting

screwsand holders-4 ea

Ferrite Core

Software CD

12V DC Adaptor

Product Contents

n Optional accessories

USB fingerprint scanner f

or enrollmenton PC

Wireless LAN Access Point

Interphone

Connectors for External Interfaces

n Bottom

n Rear

Cable and Connector Pinout

Relay

RS232

PIN PIN DESCRIPTION

1 NORMAL OPEN 2 COMMON 3 NORMAL CLOSE

PIN PIN DESCRIPTION

1 RS232_DCD 2 RS232_RXD

3 RS232_TXD 4 RS232_DTR 5 GND 6 RS232_DSR 7 DS232_RTS 8 RS232_CTS 9 RS232_RI

Before Start

RS485

PIN PIN DESCRIPTION

1 TRX 2 TRX + 3 GND 4 SHIELD GND

Cable and Connector Pinout

TTL In

인터폰

PIN PIN DESCRIPTION

1 SWIN_IN0 2 SWIN_IN1 3 GND 4 SHIELD_GND 5 SWIN_IN2 6 SWIN_IN3 7 GND 8 SHIELD_GND

PIN PIN DESCRIPTION

1 PHONE_VOICE 2 GND 3 PHONE_VCC 4 PHONE_VIDEO 5 PHONE_OPEN 6 GND 7 SHIELD_GND

Before Start

Wiegand

PIN PIN DESCRIPTION

1 WIEGAND_D0 2 WIEGAND_D1 3 GND 4 SHIELD GND

Installation Example

8P Cable

RS232

Network HUB

Firmware

Upgrade Only

Ethernet

9P Cable

3P Cable

Door Lock

Exit Button

USBUSB

Product Dimension

205

148

전면

205

측면

135

189

브라켓

(unit : mm)

Installation of Wall-mount Bracket

n Fix wall mount bracket on a wall using wall

mounting screws

Wall Mounting

Screws

n Hook DStationon the wall mount bracket.

n Fix BioStationand wall mounting bracket using a

screw.

Screw

Ferrite Core Installation

n Ferrite core

Power Connection

n Power connection

n Recommended

l12V ± 10%, at least 1500mA for BioStation alone installation. lComply with standard IEC/EN 60950-1 lTo share the power with other devices, use a power supply with higher current ratings.

LAN Connection

RS485 Network Connection

Before Start

Intercom Connection

Before Start

Relay Connection – Fail Safe Lock

Relay Connection – Fail Secure Lock

Relay Connection -Automatic Door

TTL Input Port Connection – RTE Switches

Request

To Exit #1

Cable shield(optional)

Request

To Exit #1

Request

To Exit #1

DStation

(8) SHELD_GND (7) GND (6) TTL_IN3 (5) TTL IN2 (2) SHELD_GND (3) GND (2) TTL IN1 (1) TTL IN0

Request

To Exit #1

Wiegand Input Connection – External reader

System Specifications

n ● CPU :Main B/D CPU -ARM11 667MHz (Samsung S3C6410-667) X 1ea n Sensor B/D CPU -DSP 400MHz (ADI BP531-400) X 2ea n IO B/D CPU -ARM Corex-M3 36MHz (ST STM32F101 ) X1ea n ● Memory : Main B/D -Flash : Nand MLC 1GByte + Nor 1MByte, SDRAM(mDDR) : 256MByte n Sensor B/D -Flash : SPI 512Kbyte, SDRAM : 32MByte n IO B/D -Flash : 32Kbyte, SRAM : 6KByte n ● DISPLAY : 5inch WVGA TFT LCD (800 X 480) X 1ea n ● LED : 3-Color LED X 2ea n ● INPUT : Touch Screen X 1ea + 5 Keypad (F1~F4, CALL) n ● CAMERA : 1.3M CMOS Camera X 1ea n ● I/O Port : Wiegand In/Out X 1ch n Video Phone I/F X 1ch n Switch Input X 4ch n RS-485 X 2ch n RS-232(Full Feature RS-232) X 1ch n Relay(2A@30Vdc) X 2ch n Ethernet(10/100M) X 1ch n Micro SD Card Slot X 1ch n SAM Slot X 1ch n USB HOST(for USB Wireless LAN) X 2ch n USB HOST/Device Share(for USB Memory or PC Connection) X 1ch n ● Sound Out: System Sound용 Speaker X 1ea + Video Phone Sound용 Speaker X 1ea n ● Mic : Video Phone MIC X 1ea n ● RF CARD : Mifare/ISO14443 B-type n ● Fingerprint Sensor : OC-OC Sensor Model n ● Power Input : 12Vdc Adaptor or POE Input n ● Power Output : 12Vdc 100~200mA(T.B.D)

기타

FCC Rules

Caution

Warning

Information to User

Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interface received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more the following measures:

1. Reorient / Relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help

Electrical Specification

Min. Typ. Max. Notes

Power

Voltage (V) 10.8 12 13.2

Current (mA) - 500 800 TTL/Wiegand Input VIH(V) 2 - VIL(V) - - 0.8 Pull-up resistance (Ω) - 10k TTL/Wiegand Output VOH(V) 4 - - @ IOH= -5mA VOL(V) - - 1 @ IOL= 5mA Output resistance (Ω) - 100 Relay

Switching capacity (A) - -

Switching power (resistive)

Switching voltage (V) - -

- -

0.3

30W

37.5VADCAC 110

125

30V DC 125V AC

DC AC

Suprema Inc.

16F Parkview Office Tower, Jeongja-dong, Bundang-gu,

Seongnam, Gyeonggi, 463-863 Korea

E-mail : support@supremainc.com

Website : www.supremainc.com

Functions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.

Suprema DSMOC User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual