SuperCom PRF-MFT10R, PRF-MFT10A, PRF-MFT10F User Manual

User Manual - MFT v1.0

The information in this document is confidential to the person to whom it is addressed and should

not be disclosed to any other person. It may not be reproduced in whole, or in part, nor may any
of the information contained therein be disclosed without the prior consent of the SuperCom Ltd.

(‘the Company’). A recipient may not solicit, directly or indirectly (whether through an agent or

otherwise) the participation of another institution or person without the prior approval of the

directors of the Company.

Any form of reproduction, dissemination, copying, disclosure, modification, distribution and or

publication of this material is strictly prohibited.

© All rights reserved. Supercom 2013

USER MANUAL

MFT v1.0

Multi Frequency Transmitter

Confidential & Proprietary Page 1 of 11

User Manual - MFT v1.0

Date

Version

Comments

Author

26.6.2014

1.0

Initial version

Ehud Bachman

18.8.2014

1.1

Updated

Ehud Bachman

Author

Ehud Bachman

Approved by

Barak Trabelsi

Document version

1.1

Product

MFT v1.0

Date

August 2014

Document version management

Confidential & Proprietary Page 2 of 11

User Manual - MFT v1.0

Table of Contents

1 Introduction .................................................................................................................. 4

1.1 About this Guide ..................................................................................................... 4

1.2 Important Information.............................................................................................. 4

1.3 Safety Precautions.................................................................................................. 4

1.4 FCC Warnings ........................................................................................................ 6

2 Technical Specifications ............................................................................................. 7

2.1 Interfaces and MMIs ............................................................................................... 7

2.1.1 RF .................................................................................................................... 7

2.1.2 Interfaces & Connectors .................................................................................. 7

2.1.3 Tampers & Sensors ................................ ......................................................... 7

2.1.4 MMI ................................................................................................................. 7

2.2 Power Requirements .............................................................................................. 7

3 Installation ................................................................................................ .................... 8

4 Configuration ............................................................................................................... 9

5 References ................................................................................................................. 10

5.1 Acronyms and Abbreviations ................................................................................ 10

6 Appendix A: ................................................................................................................ 11

Confidential & Proprietary Page 3 of 11

FW & HW Test Plans - MFT v1.0

1 Introduction

1.1 About this Guide

This User Guide contains important information for installers and users of the PRF-MFT10 product
and all of its series. MFT stands for Multi Frequency Transmitter.
This guide introduces the PRF-MFT10 and provides instructions on how to install, configure, operate,
and troubleshoot the device. Each section has both written and graphically explanations to provide the
technical information necessary to be successful at using, installing, and configuring the PRF-MFT10
device.

1.2 Important Information

SuperCom Inc. reserves the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service
without notice. Customers should obtain the latest relevant information before placing orders and
should verify that such information is current and complete. All products are sold subject to SuperCom
Inc.’s terms and conditions of sale supplied at the time of order acknowledgment.
SuperCom Inc. warrants performance of its hardware products to the specifications applicable at the
time of sale in accordance with SuperCom Inc.’s standard warranty. Testing and other quality control
techniques are used to the extent SuperCom Inc. deems necessary to support this warranty. Except
where mandated by government requirements, testing of all parameters of each product is not
necessarily performed.
SuperCom Inc. assumes no liability for applications assistance or customer product design. Customers
are responsible for their products and applications using SuperCom Inc. components. To minimize the
risks associated with customer products and applications, customers should provide adequate design
and operating safeguards.
SuperCom Inc. does not warrant or represent that any license, either express or implied, is granted
under any SuperCom Inc. patent right, copyright, mask work right, or other SuperCom Inc. intellectual
property right relating to any combination, machine, or process in which SuperCom Inc. products or
services are used. Information published by SuperCom Inc. regarding third-party products or services
does not constitute a license from SuperCom Inc. to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from SuperCom Inc. under the
patents or other intellectual property of SuperCom Inc.
Resale of SuperCom Inc. products or services with statements different from or beyond the
parameters stated by SuperCom Inc. for that product or service voids all express and any implied
warranties for the associated SuperCom Inc.
Product or service and is an unfair and deceptive business practice. SuperCom Inc. is not responsible
or liable for any such statements.
All company and brand products and service names are trademarks or registered trademarks of their
respective holders.

1.3 Safety Precautions

! IMPORTANT:

The equipment contains communication devices. Any changes or modifications made to the
equipment without the written consent of SuperCom Inc. or SuperCom Ltd., or Vuance Ltd., and
its resellers or distributors, can nullify the user’s authority to operate this equipment.
The user assumes all risks associated with the use and handling of the equipment, and
specifically acknowledges that SuperCom Inc. & SuperCom Ltd. & Vuance Ltd., and its resellers