SuperCom PRF PURET15 User Manual

User Manual - PURETAG v1.5

USER MANUAL

PURETAG v1.5

Model: PRF-PURET15

The information in this document is confidential to the pe rson to whom it is addr ess ed a nd should

not be disclosed to any other person. It may not be reproduced in who le , or in part, nor may any
of the information contained there in be disc losed without the prior consent of the SuperCom Ltd.

(‘the Company’). A recipient may not solicit, dir e c tly or indirectly (whether through an agent or

otherwise) the participatio n of ano the r institution or person without the prior approval of the

Any form of reproduction, dissemination, copying, disclosure, modification, distribution and or

publication of this material is strictly prohibited.

directors of the Company.

© All rights reserved. Supercom 2013

Confidential & Proprietary Page 1 of 12

User Manual - PURETAG v1.5

Date

Version

Comments

Author

20.8.2014

1.0

Initial version

Ehud Bachman

Author

Ehud Bachman

Approved by

Barak Trabelsi

Document version

1.0

Product

PURETAG v1.5

Date

AUGUST 2014

Document version management

Confidential & Proprietary Page 2 of 12

User Manual - PURETAG v1.5

Table of Contents

1 Introduction .................................................................................................................. 4

1.1 About this Guide ..................................................................................................... 4

1.2 Important Information.............................................................................................. 4

1.3 Safety Precautions.................................................................................................. 5

1.4 FCC Warnings ........................................................................................................ 6

2 Technical Specifications ............................................................................................. 7

2.1 Interfaces and MMIs ............................................................................................... 7

2.1.1 RF .................................................................................................................... 7

2.1.2 Tampers & Sensors ......................................................................................... 7

2.1.3 MMI ................................................................................................................. 7

2.2 Power ..................................................................................................................... 7

2.3 Operational temperature ......................................................................................... 7

3 Abstract ........................................................................................................................ 8

4 Operational description ............................................................................................... 9

4.1 P/N: PRF-PURET15EM .......................................................................................... 9

4.2 P/N: PRF-PURET15AT ......................................................................................... 10

5 References ................................................................................................................. 11

5.1 Acronyms and Abbreviations ................................................................................ 11

6 Appendix A: ................................................................................................................ 12

Confidential & Proprietary Page 3 of 12

User Manual - PURETAG v1.5

1 Introduction

1.1 About this Guide

This User Guide contains important information for users of the PRF-PURET15 product and all of its
series.
This guide introduces the PRF-PURET15 and provides instructions on how to install, configure,
operate, and troubleshoot the device. Each section has both written and graphically explanations to
provide the technical information necessary to be successful at using, installing, and configuring the
PRF-PURET15 device.

1.2 Important Information

SuperCom Inc. reserves the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service
without notice. Customers should obtain the latest relevant information before placing orders and
should verify that such information is current and complete. All products are sold subject to SuperCom
Inc.’s terms and conditions of sale supplied at the time of order acknowledgment.
SuperCom Inc. warrants performance of its hardware products to the specifications applicable at the
time of sale in accordance with SuperCom Inc.’s standard warranty. Testing and other quality control
techniques are used to the extent SuperCom Inc. deems necessary to support this warranty. Except
where mandated by government requirements, testing of all parameters of each product is not
necessarily performed.
SuperCom Inc. assumes no liability for applications assistance or customer product design. Customers
are responsible for their products and applications using SuperCom Inc. components. To minimize the
risks associated with customer products and applications, customers should provide adequate design
and operating safeguards.
SuperCom Inc. does not warrant or represent that any license, either express or implied, is granted
under any SuperCom Inc. patent right, copyright, mask work right, or other SuperCom Inc. intellectual
property right relating to any combination, machine, or process in which SuperCom Inc. products or
services are used. Information published by SuperCom Inc. regarding third-party products or services
does not constitute a license from SuperCom Inc. to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from SuperCom Inc. under the
patents or other intellectual property of SuperCom Inc.
Resale of SuperCom Inc. products or services with statements different from or beyond the
parameters stated by SuperCom Inc. for that product or service voids all express and any implied
warranties for the associated SuperCom Inc.
Product or service and is an unfair and deceptive business practice. SuperCom Inc. is not responsible
or liable for any such statements.
All company and brand products and service names are trademarks or registered trademarks of their
respective holders.

User Manual - PURETAG v1.5

1.3 33BSafety Precautions

! IMPORTANT:

The equipment contains communication devices. Any changes or modifications made to the
equipment without the written consent of SuperCom Inc. or SuperCom Ltd., or Vuance Ltd., and
its resellers or distributors, can nullify the user’s authority to operate this equipment.
The user assumes all risks associated with the use and handling of the equipment, and
specifically acknowledges that SuperCom Inc. & SuperCom Ltd. & Vuance Ltd., and its resellers
or distributors, will not be liable for any damages of any kind, including personal injury or
property damages resulting from use of the equipment.

! IMPORTANT:

Carefully read the safety information contained in this section, and throughout this user guide,
before installing, operating, or performing any maintenance task on the equipment.

! IMPORTANT:

Operations not performed as per the instructions in this user guide are done at the user’s own
risk and liability.

! IMPORTANT:

Only trained, authorized personnel should install, maintain and repair the equipment.

!

Once you have thoroughly reviewed this user guide, if you have any questions, please
contact your reseller.

Confidential & Proprietary Page 5 of 12

User Manual - PURETAG v1.5

The FCC Wants You to Know

FCC Warning

Modifications not expressly approved by the manufacturer

THE MANUFACTURER IS NOT RES PONSIBLE FOR ANY RADIO OR

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS

1.4 34BFCC Warnings

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures :

a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and

receiver.

c) Connect the equipment to an outlet on a circuit different

from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV technician.

could void the user authority to operate the equipment under

TV

TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE

USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including

interference that may cause undesired operation.

FCC Rules.

Confidential & Proprietary Page 6 of 12

User Manual - PURETAG v1.5

2 6BTechnical Specifications

2.1 35BInterfaces and MMIs

2.1.1 41BRF

11B1 x RF 433MHz ASK\FSK Transmitter module
12B2 x LF 125KHz OOK Receiver module

2.1.2 42BTampers & Sensors

13BCase tamper
14BMotion sensor
15BStrap tamper (Optional)

2.1.3 43BMMI

16BIndication LED

2.2 36BPower

17BInternal battery 3v

2.3 37BOperational temperature

-20°C to +60°C

Confidential & Proprietary Page 7 of 12

User Manual - PURETAG v1.5

3

7BAbstract

The PureTag is part of Supercom electronic monitoring solution.
The PureTag1.5 is a 4 layer PCB card. It communicates by air channels via LF and RF. Both

channels are independent and based on simplex topology.
The RF channel (at 433.92 MHz) set to communicate with the RFID reader by simplex

transmitting.
The second channel (at 125 KHz) set to receives data (see figure 1.3.1).

0B

Confidential & Proprietary Page 8 of 12

User Manual - PURETAG v1.5

4 8BOperational description

1BThis model currently has two sub-models (P/Ns):

4.1 38BP/N: PRF-PURET15EM

18BPRF-PURET15EM is targeted for the EM market (Electronic Monitoring) to be used to track

and monitor offenders w hi l e in house arres t.

19BThe unit comes in a sophisticated ankle enclosure to prevent the offender to take it off

easily.

20BThe unit immediately alerts when the offender trying to remove or sabotage the unit.
21BThe unit alerts whenever the offender tries to leave his premises when not allowed.
22BThe unit shall be sold to governments and police departments around the world, along with

detailed installation instructions depended on their specific requirements and needs.

23B

Confidential & Proprietary Page 9 of 12

User Manual - PURETAG v1.5

4.2 39BP/N: PRF-PURET15AT

24BPRF-PURET15AT is targeted for asset management system, to be used to track and

monitor inventory/asset.

25BThe unit comes in mini round enclosure to be smaller as possible to be less notice abl e .
26BThe unit alerts when it’s taken off from an item that being monitored.
27BThe unit can be used in access control and asset management systems. It is supplied with

detailed installation instructions depended on the specific requirements and needs of the
distributor/buyer.

28BThe unit may come with slightly different designs since it can be used with a logo sticker /

logo engraved or simply without a logo.

29BExample with a sticker logo:

30B

Confidential & Proprietary Page 10 of 12

User Manual - PURETAG v1.5

5 9BReferences

5.1 40BAcronyms and Abbreviations

API – Application Programmer Interface

ADC – Analog to Digital Conversion

RF – Radio Frequency

CPU – Central processing unit

CAD – Computer Aided Design

CISC –Complex Instruction Set Computing

DAC –Digital to Analog Convertor

ETSI –European Telecommunications Standards Institute

FCC –Federal Communications Commission

GUI – Graphical User Interface

I/O –Input/output

IRQ –Interrupt Request

ISO –International Organization for Standardization

Kbps –kilobit per second

LED –Light Emitting Diode

MCU – Micro Controller unit

MMI – man machine interface

RAM –Random Access Memory

ROM –Read Only Memory

Confidential & Proprietary Page 11 of 12

User Manual - PURETAG v1.5

6 10BAppendix A:

Model Name: PRF-PURET15

P/Ns types: PRF-PURET15EM

PRF-PURET15AT

2BThe tables below describe the sensor combination that can be for any PRF-PURET15,
3BFor PRF-PURET15XX series:

4B

Confidential & Proprietary Page 12 of 12