CONICAL BURR
COFFEE GRINDER II
EM0500
Contents
Sunbeam’s Safety Precautions 2
Congratulations 3
Features of your Cafe Series
Coffee Grinder II 4
Functions of your Cafe Series
Coffee Grinder II 6
Operating your Cafe Series
Coffee Grinder II 8
Adjusting the Grind Setting 11
Recalibration Guide 13
Care and Cleaning 16
®
Conical Burr
®
Conical Burr
®
Conical Burr
Important instructions – retain for
future use.
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR SUNBEAM
COFFEE GRINDER
• Check the grinding bowl for the presence of
foreign objects before using.
• Always operate the grinder with the bean
hopper properly inserted in the grinder.
• Do not place your hand in or near the burrs
while the grinder is in operation.
• Always place the unit on a flat, level surface.
Sunbeam is very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also exercise
care when using an electrical appliance. Listed
below are precautions which are essential for the
safe use of an electrical appliance:
• Read carefully and save all the instructions
provided with an appliance.
• Always turn the power off at the power outlet
before you insert or remove a plug. Remove by
grasping the plug - do not pull on the cord.
• Turn the power off and remove the plug when the
appliance is not in use and before cleaning.
• Do not use your appliance with an extension cord
unless this cord has been checked and tested by
a qualified technician or service person.
• Always use your appliance from a power outlet of
the voltage (A.C. only) marked on the appliance.
• This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety.
• Children should be supervised to ensure that they
do not play with the appliance.
• The temperature of accessible surfaces may be
high when the appliance is operating.
• Never leave an appliance unattended while
in use.
• Switch off and unplug at power point before
cleaning.
• Do not attempt to re-grind ground coffee.
• Switch off the appliance and disconnect from
power supply before touching any part of the
grinder that moves during use.
• Do not use an appliance for any purpose
other than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not let the power cord of an appliance hang
over the edge of a table or bench top or touch any
hot surface.
• Do not operate any electrical appliance with a
damaged cord or after the appliance has been
damaged in any manner. If damage is suspected,
return the appliance to the nearest Sunbeam
Appointed Service Centre for examination,
repair or adjustment.
• For additional protection, Sunbeam recommend
the use of a residual current device (RCD with
a tripping current not exceeding 30mA in
the electrical circuit supplying power to your
appliances.
• Do not immerse the appliance in water
or any other liquid unless recommended.
• Appliances are not intended to be operated
by means of an external timer or separate remote
control system.
• This appliance is intended to be used in
household and similar applications such as: staff
kitchen areas in shops, offices and other working
environments; farm houses; by clients in hotels,
motels and other residential type environments;
bed and breakfast type environments.
If you have any concerns regarding the performance and use of your appliance,
please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line on 1300 881 861.
Ensure the above safety precautions are understood.
2
Congratulations
Congratulations on the purchase of your
Sunbeam Cafe Series
®
Conical Burr Coffee
Grinder.
The Sunbeam Cafe Series
®
delivers quality,
style and superior performance capturing
the essence of the commercial kitchen.
Inspired by heavy-duty equipment found in
restaurants, cafes and bars, the Sunbeam
Cafe Series
®
is built to last. It brings together
a range of appliances designed to expertly
create authentic café food and beverages at
home.
Uncompromising blends of stainless steel,
brass and die-cast alloy characterise the
range. This combined with advanced
technology and functional design, guarantee
the performance, that each product will
surpass expectations.
When making coffee regardless of the
brewing method the flavour of the resulting
brew depends largely on the quality,
freshness and roast of the coffee being used.
Other factors including the purity of the brew
water, condition of the grinder and the actual
design of the burrs within the grinder can
also affect the taste of the final cup.
The Sunbeam Cafe Series
®
grinder features
tool hardened steel conical burrs for extra
long life. Inherent from the conical burr
design is homogenous grinding so the particle
size of the coffee is consistent and even. This
is especially important for espresso, if the
particle size of the coffee is uniform equal
amounts of the coffee’s aromatic profile will
be extracted. However if the particle size of
the coffee varies some particles will be overextracted and some will be under-extracted,
resulting in a poor tasting coffee.
Another advantage of the conical burr design
is its slow rotating operation. This combined
with a gear-driven motor, minimises heat
transfer to the burrs and thus protects the
aromatic profile of the coffee and ultimately
enhances the quality of the resulting brew.
The Sunbeam Cafe Series
®
Conical Burr
Coffee Grinder is designed with quality
die-cast metal components and includes
many features that make grinding coffee at
home easy so you can enjoy a lovely fresh
cup of coffee every time. We hope you enjoy
your new coffee grinder and should you need
any further assistance please don’t hesitate
to contact the Sunbeam Consumer Hotline on
Australia
1300 881 861
New Zealand
0800 786 232
3
Features of your Cafe Series
Conical Burr Coffee Grinder
400g Bean hopper
The 400g capacity bean hopper has a shutter release
mechanism for easy removal and preventing accidental
spills. It allows the user to transfer any un-used beans
to an ideal storage unit to preserve freshness.
Burr shield
Grind adjustment collar
Large and easy to use, the collar has a wide-range of
40 grind settings. The coffee maker can select a fine
grind to suit commercial espresso or adjust the setting
for other brewing styles – from Turkish to plunger.
With such precise settings the user controls the particle
size and ultimately the quality of the brew.
Group handle locator
In two sizes: for commercial sized group handles
and domestic sized group handles.
®
Ground coffee container
Preparation mat
Positioned under the grinding spout the preparation
mat is ideal for catching loose coffee grinds while filling
directly into the group handle. The mat can also be used
on the bench as a tamping pad.
Rubber feet
The non-slip rubber feet ensure the grinder remains
stable and prevents slipping on the bench top during use.
4
Conical burrs
The metal conical burr design achieves
excellent grind consistency and minimises
heat transfer to the coffee due to the slowly
rotating burrs.
Hopper closure arm
Grind delivery chamber
The grind delivery chamber is designed to
assist in delivering the ground coffee directly
into the group handle or coffee grind container.
Grind on demand button
Position the group handle into the group
handle locator, push against the button and
freshly ground coffee will flow directly into
the basket, pull the handle away and grinding
will stop.
Die-cast metal housing
Built to last, the heavy-duty die-cast metal
body encases a powerful motor, supported by
a 5 year guarantee and provides a stable base
for the grinder.
Operation switch
Switch to ‘On’ to grind continuous quantities
directly into the storage container, ‘Off’ to
stop or alternatively switch to ‘Auto’ for
grinding directly into the group handle.
Cord wrap
Cord wraps away to keep bench top clean.
Burr cleaning brush
Strong bristles help sweep out grinds from
the burrs.
Commercial size
group handle locator
Domestic size
group handle locator
5
Functions of your Cafe Series®
Conical Burr Coffee Grinder II
No Mess Design
The new static reducing design makes light
work of the grinding process. So you can
enjoy the benefits of drinking a true espresso
made from freshly ground coffee beans but
without the mess.
Slow speed grinding
The combination of a powerful gear-driven
motor and conical burr design delivers a slow
speed grinding process. This minimises the
heat transferred to the coffee, protecting its
aromatic profile.
Large removable base plate with tamping pad
The large size of the base plate is ideal for
catching any coffee grinds when filling the
coffee handle and is removable for easy
cleaning. Also fitted with a silicon tamping
pad for preparing the coffee handle this
protects both the spouts on the coffee handle
and the bench top surface.
6