Thank you for choosing a quality engineered
STIHL product.
It has been built using modern production techni‐
ques and comprehensive quality assurance.
Every effort has been made to ensure your satis‐
faction and trouble-free use of the product.
Please contact your dealer or our sales company
if you have any queries concerning this product.
Your
Dr. Nikolas Stihl
1Guide to Using this Manual
1.1Pictograms
All the pictograms attached to the machine are
shown and explained in this manual.
1.2Symbols in text
WARNING
Warning where there is a risk of an accident or
personal injury or serious damage to property.
NOTICE
Caution where there is a risk of damaging the
machine or its individual components.
1.3Engineering improvements
STIHL's philosophy is to continually improve all
of its products. For this reason we may modify
the design, engineering and appearance of our
products periodically.
Therefore, some changes, modifications and
improvements may not be covered in this man‐
ual.
2Safety Precautions and
Working Techniques
This instruction manual covers a STIHL sprayer
which is also referred to as the unit in the
descriptions.
Special safety precautions must be
observed when working with this
sprayer.
It is important that you read the
instruction manual before first use
and keep it in a safe place for future
reference. Non-observance of the
instruction manual may result in seri‐
ous or even fatal injury.
2.1General
Observe all applicable local safety regulations,
standards and ordinances.
If you have not used this model before: Have
your dealer or other experienced user show you
how it is operated or attend a special course in
its operation.
Minors should never be allowed to use this prod‐
uct.
Keep bystanders, especially children, and ani‐
mals away from the work area.
When the sprayer is not in use, put it in a place
where it does not endanger others. Secure it
against unauthorized use.
The user is responsible for avoiding injury to third
parties or damage to their property.
Do not lend or rent your sprayer without the
instruction manual. Be sure that anyone using it
understands the information contained in this
manual.
Do not operate your sprayer if any of its compo‐
nents are damaged. Make sure that all compo‐
nents are properly sealed – no leaks.
Pressurize the tank only with the pump that is
installed in the sprayer.
Operate the sprayer only if it is complete and
properly assembled.
To operate this sprayer you must be rested, in
good physical condition and mental health.
Original Instruction Manual
0000006598_013_GB
Printed on chlorine-free paper
Printing inks contain vegetable oils, paper can be recycled.
2 Safety Precautions and Working TechniquesEnglish
Do not operate the sprayer if you are under the
influence of any substance (drugs, alcohol)
which might impair vision, dexterity or judgment.
2.2Intended use
The sprayer is suitable for spraying chemicals
and other liquids to control pests and weeds.
Typical areas of application are in fruit and vege‐
table growing, horticulture, plantations, grassland
and the forestry industry.
Only use plant protection products that are spe‐
cifically approved for use in sprayers.
Do not use your sprayer for any other purpose
because of the increased risk of accidents and
damage to the sprayer. Never attempt to modify
your sprayer in any way since this may result in
accidents or damage to the sprayer.
SG 11 PLUS
The SG 11 PLUS is also suitable for spraying
alkaline cleaning products with a pH value
between 7‑14.
Only use cleaning products that are specifically
approved for use in sprayers.
The use of cleaning products outside the speci‐
fied pH range is not permitted because it may
result in accidents or damage to the sprayer.
2.3Clothing and Equipment
Wear proper protective clothing and equipment
when using, filling and cleaning the sprayer. Fol‐
low the chemical manufacturer's instructions with
respect to protective equipment.
Clothing must be snug-fitting but allow complete
freedom of movement.
Immediately change work clothes contaminated
with plant protection/cleaning products.
For some chemicals/cleaning agents
it is necessary to wear impermeable
coveralls.
If you are spraying overhead, wear impermeable
head covering.
Wear impermeable safety boots with
a non-slip sole which are resistant to
plant protection/cleaning products.
Do not wear sandals or go barefoot.
Wear impermeable gloves resistant to
plant protection/cleaning products.
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the safety
glasses are a comfortable and snug
fit.
Wear a suitable respirator.
Inhaling plant protection/cleaning products may
be harmful to health. Always wear a suitable res‐
pirator to protect yourself against health risks
and allergic reactions. Observe warnings in the
directions for use of the plant protection/cleaning
product and all applicable local safety regula‐
tions, standards and ordinances.
2.4Transport
Transporting in a vehicle:
Properly secure the sprayer to prevent turn‐
–
over and damage.
The tank must be de-pressurized, empty and
–
clean.
2.5Cleaning
Clean plastic surfaces with a cloth. Do not use
aggressive detergents. They may damage the
plastic.
Do not use a pressure washer to clean the unit.
The solid jet of water may damage parts of the
unit.
2.6Accessories
Only use parts and accessories that are explicitly
approved for this tool by STIHL or are technically
identical. If you have any questions in this
respect, consult a servicing dealer. Use only high
quality parts and accessories in order to avoid
the risk of accidents and damage to the tool.
STIHL recommends the use of genuine STIHL
replacement parts. They are specifically
designed to match your model and meet your
performance requirements.
Never attempt to modify your tool in any way
since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
0458-596-0121-C3
English2 Safety Precautions and Working Techniques
2.7Handling Plant Protection/
Cleaning Products
Read the instructions supplied with the plant pro‐
tection/cleaning product prior to use. Follow the
instructions with respect to mixing, using, per‐
sonal protection equipment, storage and dis‐
posal.
Observe legal requirements for handling the
chemicals.
Plant protection products/cleaning agents may
contain substances that are harmful to humans,
animals, plants and the environment – risk or poi‐
soning and risk of serious or fatal injuries!
Avoid contact with plant protection products/
cleaning agents.
Plant protection products/cleaning agents may
be used only by persons trained in their handling
and the appropriate first-aid measures.
Keep instructions or label of the plant protection/
cleaning product available at all times in order to
inform the doctor about the chemical concerned
in an emergency. In an emergency, follow the
instructions on the product label or in the direc‐
tions for use. Observe manufacturer's safety
data sheets.
2.7.1Mixing plant protection/cleaning prod‐
Always follow manufacturer's recommendations
for use of plant protection/cleaning product.
–
–
–
–
–
–
–
–
uct and filling sprayer
Before filling the tank with chemicals, carry out
a test with fresh water and check all parts of
the sprayer for leaks.
Never apply undiluted liquid concentrates of
plant protection/cleaning products.
Prepare solution and fill the sprayer outdoors
only or in well-ventilated locations.
Only prepare sufficient solution for the job in
hand so that no surplus is left in the tank.
Do not mix different plant protection/cleaning
products unless such a mixture is approved by
the manufacturer.
Mix different plant protection/cleaning products
only in accordance with the manufacturer's
instructions – incorrect mixtures may produce
toxic fumes or explosive solutions.
Stand the sprayer on a level surface – do not
fill the tank above the maximum mark.
When filling from a central water supply, do
not immerse the end of the hose in the solu‐
tion – sudden low pressure in the system may
cause the solution to be sucked back into the
water supply.
Close the tank tightly after filling.
–
2.7.2Application
Work only in the open or in very well ventilated
–
locations, e.g. open greenhouses.
Do not eat, drink or smoke while working with
–
plant protection/cleaning products.
Never blow through nozzles or other compo‐
–
nents by mouth.
Do not spray in windy conditions.
–
Too high or too low a spray pressure or unfavor‐
able weather conditions can result in the wrong
solution concentration. Too high a dose may
harm the surface, plants or the environment. Too
low a-dose may result in unsuccessful treatment.
In order to reduce the risk of damage to surfa‐
ces, plants and the environment, do not operate
the sprayer:
if pressure is too high or too low
–
in windy conditions
–
at temperatures above 30 °C in the shade
–
in direct sunlight
–
In order to reduce the risk of accidents and dam‐
age to the sprayer, never operate the sprayer
with:
flammable liquids
–
viscous or sticky liquids
–
caustic or corrosive chemicals
–
liquids hotter than 30 °C
–
2.7.3Storage
During work breaks, do not leave the sprayer
–
in the hot sun or near any heat source.
Never store plant protection products/cleaning
–
agents in the tank for longer than one day.
Store and transport plant protection products/
–
cleaning agents only in approved containers.
Never store plant protection products/cleaning
–
agents in containers intended for foods, drinks
or animal feed.
Do not store plant protection products/cleaning
–
agents together with foods, drinks or animal
feed.
Keep plant protection/cleaning products out of
–
reach of children and animals.
Store the sprayer empty and clean. It must not
–
be under pressure.
Store the plant protection/cleaning product
–
and sprayer in a place secured against unau‐
thorized use.
Store the unit in a dry place protected from
–
frost.
40458-596-0121-C
Loading...
+ 8 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.