STIHL FSE 60
{
Instruction Manual
Notice d’emploi
G Instruction Manual
1 - 19
F Notice d’emploi
20 - 39
Contents
English
Guide to Using this Manual 2
Safety Precautions and Working
Techniques 2
Using the Unit 7
Approved Combinations of Cutting
Attachment, Deflector, Handle and
Harness 8
Mounting the Drive Tube 9
Mounting the Loop Handle 9
Original Instruction ManualPrinted on chlorine-free paper
Mounting the Deflector 10
Mounting the Cutting Attachment 10
Connecting to Power Supply 11
Fitting the Harness 12
Switching On 12
Switching Off 13
Storing the Machine 13
Maintaining the Mowing Head 13
Maintenance and Care 16
Main Parts 17
Specifications 18
Maintenance and Repairs 19
Disposal 19
Printing inks contain vegetable oils, paper can be recycled.
Dear Customer,
Thank you for choosing a quality
engineered STIHL product.
It has been built using modern
production techniques and
comprehensive quality assurance.
Every effort has been made to ensure
your satisfaction and trouble-free use of
the product.
Please contact your dealer or our sales
company if you have any queries
concerning this product.
Your
Dr. Nikolas Stihl
{
© ANDREAS STIHL AG & Co. KG, 2018
0458-238-8221. VA3.F18.
0000000135_010_GB
FSE 60
This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process
with electronic systems.
1
English
Guide to Using this Manual Safety Precautions and
Working Techniques
Pictograms
All the pictograms attached to the
machine are shown and explained in this
manual.
Symbols in text
WARNING
Warning where there is a risk of an
accident or personal injury or serious
damage to property.
NOTICE
Caution where there is a risk of
damaging the machine or its individual
components.
Engineering improvements
STIHL's philosophy is to continually
improve all of its products. For this
reason we may modify the design,
engineering and appearance of our
products periodically.
Therefore, some changes, modifications
and improvements may not be covered
in this manual.
Observe all applicable local safety
regulations, standards and ordinances.
If you have not used this model before:
Have your dealer or other experienced
user show you how to operate your
machine or attend a special course in its
operation.
Minors should never be allowed to use
this product.
Keep bystanders, especially children,
and animals away from the work area.
When the machine is not in use, store it
so that it does not endanger others.
Secure it against unauthorized use,
disconnect the plug from the power
supply.
The user is responsible for avoiding
injury to third parties or damage to their
property.
Some special safety pre
cautions must be
observed when working
with this power tool
because of the very high
speed of its cutting
attachment and the fact
that it is powered by
electricity.
It is important that you
read the instruction man
ual before first use and
keep it in a safe place for
future reference. Nonobservance of the
instruction manual may
result in serious or even
fatal injury.
Do not lend or rent your unit without the
instruction manual. Be sure that anyone
using it understands the information
contained in this manual.
-
Persons who are not able to operate the
power tool safely due to limited physical,
sensory or mental ability may work with
it only under supervision or after being
instructed appropriately by a
responsible person.
The use of noise emitting power tools
may be restricted to certain times by
national or local regulations.
-
Before each use, check that your power
tool is in good condition. Pay special
attention to the power cord, mains plug
and safety devices.
Do not use the power cord to pull or
carry the power tool.
Disconnect plug from wall outlet before
performing any work on the machine,
e.g. cleaning, maintenance, replacing
parts.
The deflector on this power tool cannot
protect the operator from all objects
thrown by the cutting attachment
(stones, glass, wire, etc.). Such objects
may ricochet and then hit the operator.
Do not use a pressure washer to clean
the unit. The solid jet of water may
damage parts of the unit.
Do not spray the power tool with water.
Physical Condition
To operate this power tool you must be
rested, in good physical condition and
mental health.
2
FSE 60
English
If you have any condition that might be
aggravated by strenuous work, check
with your doctor before operating a
power tool.
Do not operate the power tool if you are
under the influence of any substance
(drugs, alcohol) which might impair
vision, dexterity or judgment.
Accessories and Spare Parts
Only use cutting attachments and
accessories that are explicitly approved
for this power tool by STIHL or are
technically identical. If you have any
questions in this respect, consult a
servicing dealer. Use only high quality
tools and accessories in order to avoid
the risk of accidents and damage to the
unit.
STIHL recommends the use of genuine
STIHL tools and accessories. They are
specifically designed to match the
product and meet your performance
requirements.
Never attempt to modify your machine in
any way since this may increase the risk
of personal injury. STIHL excludes all
liability for personal injury and damage
to property caused while using
unauthorized attachments.
Applications
Depending on the cutting attachment
fitted, use your trimmer only for cutting
grass, wild growth and similar materials.
Do not use the machine for any other
purpose because of the increased risk of
accidents and damage to the machine.
Never attempt to modify the product in
any way since this may result in
accidents or damage to the product.
Clothing and Equipment
Wear proper protective clothing and
equipment.
Clothing must be sturdy
but allow complete free
dom of movement. Wear
snug-fitting clothing, an
overall and jacket combi
nation, do not wear a
work coat.
Avoid clothing that could get caught on
branches or brush or moving parts of the
machine. Do not wear a scarf, necktie or
jewelry. Tie up and confine long hair
(e.g. with a hair net, cap, hard hat, etc.).
Wear sturdy shoes with
non-slip soles.
WARNING
To reduce the risk of eye
injuries, wear snug-fitting
safety glasses in accord
ance with European
Standard EN166. Make
sure the safety glasses
are a good fit.
Wear a face shield and make sure it is a
good fit. A face shield alone does not
provide adequate eye protection.
Wear hearing protection, e.g. earplugs
or ear muffs.
-
Wear robust work gloves
made of durable material
(e.g. leather).
STIHL offers a comprehensive range of
personal protective clothing and
equipment.
Transporting the Power Tool
Always switch off the power tool and
-
unplug it from the power supply.
Carry the unit hanging from the shoulder
strap or properly balanced by the drive
tube or loop handle.
Transporting by vehicle: Properly secure
the power tool to prevent turnover and
damage.
Before Starting Work
Inspect the power tool.
Check that your power tool is properly
assembled and in good condition – refer
to appropriate chapters in the instruction
manual.
– Starting lockout lever and trigger
-
switch must move freely – the switch
must return to the idle position when
it is released.
– Use only an approved combination
of cutting attachment, deflector,
handle and harness. All parts must
be assembled properly and
securely. To reduce the risk of
injury, never use metal cutting
attachments.
FSE 60
3
English
002BA117 KN
– Check that the cutting attachment is
properly and securely mounted and
in good condition.
– Check protective devices (e.g.
deflector for cutting attachment) for
damage or wear. Always replace
damaged parts. Never operate the
unit with a damaged deflector.
– Keep the handles dry and clean –
free from oil and dirt – for safe
control of the power tool.
– Adjust handle to suit your height and
reach.
To reduce the risk of accidents, do not
operate the unit if it is not properly
assembled and in good condition.
Do not operate your power tool if any of
its components are damaged or not
properly mounted.
Never attempt to modify the controls or
the safety devices in any way.
Before switching on your power tool,
make sure the cutting attachment is not
touching the ground or any other object.
To reduce the risk of
injury, avoid contact with
the cutting attachment.
Note that the cutting
attachment continues to
run for a short period
after the power tool is
switched off – flywheel
effect.
Electrical Connection.
Reduce the risk of electric shock:
– Voltage and frequency of the power
tool (see rating plate) and the
voltage and frequency of your
power supply must be the same.
– Check the connecting cord, plug
and extension cord for damage.
Never use damaged cords,
couplings and plugs or connecting
cords that do not comply with
regulations.
– Always connect the power tool to a
properly installed wall outlet.
– Check that the insulation of the
power cord, extension cord, plug
and coupling is in good condition.
– Never touch the mains plug,
connecting cord, extension cord or
electrical connections with wet
hands.
– Make sure the extension cord used
complies with the regulations for the
intended application.
Position the connecting and extension
cords correctly:
– Check minimum cross section of
wires (wire gauge) – see
"Connecting to Power Supply".
– To reduce the risk of stumbling,
position and mark the connecting
cord so that it cannot be damaged
or endanger others.
– Using unsuitable extension cords
can be dangerous. Use only
extension cords approved for
outdoor use which are labeled as
such and have the appropriate wire
gauge.
– The plug and coupling of the
extension cord must be water-proof
and must never be immersed in
water.
– Do not chafe on edges, pointed or
sharp objects
– Do not squeeze through gaps in
doors or windows
– If cords are twisted – unplug the
power tool and straighten them out
– Never touch the rotating cutting
attachment
– Always unwind the extension cord
completely from the cable drum to
reduce the risk of fire from
overheating.
Holding and Controlling the Power Tool
Always hold the unit firmly with both
hands on the handles. Make sure you
always have good balance and secure
footing.
Always hold the machine on the righthand side of your body.
Left hand on loop handle, right hand on
control handle, even if you are lefthanded.
4
FSE 60
English
15m (50ft)
During Operation
If the power supply cord
is damaged, immediately
disconnect the plug from
the wall outlet to avoid
the risk of electric shock.
Avoid damage to the power supply cord.
Do not drive over it, pinch or tug it.
Never jerk the connecting cord to
disconnect it from the wall outlet. To
unplug, grasp the plug, not the cord.
Be sure your hands are dry before
touching the plug or power cord.
Never spray water on the unit – risk of
short circuit!
The drive motor is not
waterproof. To reduce
the risk of a short circuit
or electrocution, never
work with the power tool
in the rain or in wet or
very damp locations.
Do not leave the power tool outdoors in
the rain.
In case of imminent danger or in an
emergency, switch off the motor
immediately – release the trigger switch
and starting lockout.
Your power tool is designed to be
operated by one person only. Do not
allow other persons in the work area.
The cutting attachment may catch and
fling objects a great distance and cause
injury - therefore, do not allow any other
persons within a radius of 15 meters of
your own position. To reduce the risk of
damage to property, also maintain this
distance from other objects (vehicles,
windows). Even maintaining a distance
of 15 meters or more cannot exclude the
potential danger.
Inspect the work area:
Stones, pieces of metal
or other solid objects may
be thrown more than 15
meters and cause per
-
sonal injury or damage
the cutting attachment
and property (e.g. parked
vehicles, windows).
To reduce the risk of injury from thrown
objects, never operate the power tool
without the proper deflector for the type
of cutting attachment being used.
Do not cut wet grass.
Take care in slippery conditions on
slopes and uneven ground.
Keep the connecting cord behind the
power tool at all times – do not walk
backwards – risk of stumbling.
Watch out for obstacles: Roots and tree
stumps which could cause you to trip or
stumble.
Always stand on the ground while
working, never on a ladder, work
platform or any other insecure support.
Be particularly alert and cautious when
wearing hearing protection because
your ability to hear warnings (shouts,
alarms, etc.) is restricted.
To reduce the risk of accidents, take a
break in good time to avoid tiredness or
exhaustion.
Work calmly and carefully – in daylight
conditions and only when visibility is
good. Stay alert so as not to endanger
others.
Special care must be taken when
working in difficult, over-grown terrain.
When cutting high scrub, under bushes
and hedges: Keep cutting attachment at
a minimum height of 15cm to avoid
harming small animals.
Check the cutting attachment at regular
short intervals during operation or
immediately if there is a noticeable
change in cutting behavior:
– Switch off the power tool, hold it
firmly and press the cutting
attachment into the ground to bring
it to a standstill, and disconnect the
plug from the power supply.
– Check condition and tightness, look
for cracks.
– Replace damaged cutting
attachments immediately, even if
they have only superficial cracks.
– Clean grass and plant residue off
the cutting attachment mounting at
regular intervals – remove any build
up of material from the cutting
attachment and deflector.
Always switch off the power tool and
unplug it from the power supply before
replacing the cutting attachment This
avoids the risk of injury from the motor
starting unintentionally.
FSE 60
5
English
Do not continue using or attempt to
repair damaged or cracked cutting
attachments by welding, straightening or
modifying the shape (out of balance).
This may cause parts of the cutting
attachment to come off and hit the
operator or bystanders at high speed
and result in serious or fatal injuries.
Use only the deflector with properly
mounted line limiting blade to ensure the
mowing lines are automatically trimmed
to the approved length.
To reduce the risk of injury, avoid
contact with the blade.
To reduce the risk of injury, always
switch off the power tool and unplug it
from the power supply before manually
adjusting the nylon line.
Using the unit with over-long nylon
cutting lines reduces the motor's
operating speed. This results in
overheating and damage to the motor.
To reduce the risk of injury, never use
wire in place of the nylon cutting line.
If your power tool is subjected to
unusually high loads for which it was not
designed (e.g. heavy impact or a fall),
always check that it is in good condition
before continuing work – see also
"Before Starting Work". Make sure the
safety devices are working properly. Do
not continue operating your power tool if
it is damaged. In case of doubt, consult
your servicing dealer.
Before leaving the power tool
unattended: Switch it off and disconnect
the plug from the power supply.
Vibrations
Prolonged use of the power tool may
result in vibration-induced circulation
problems in the hands (whitefinger
disease).
No general recommendation can be
given for the length of usage because it
depends on several factors.
The period of usage is prolonged by:
– Hand protection (wearing warm
gloves)
– Work breaks
The period of usage is shortened by:
– Any personal tendency to suffer
from poor circulation (symptoms:
frequently cold fingers, tingling
sensations).
– Low outside temperatures.
– The force with which the handles
are held (a tight grip restricts
circulation).
Continual and regular users should
monitor closely the condition of their
hands and fingers. If any of the above
symptoms appear (e.g. tingling
sensation in fingers), seek medical
advice.
Maintenance and Repairs
Always switch off the machine and
disconnect the plug from the power
supply before carrying out any
maintenance work to reduce the risk of
injury from the motor starting
unintentionally.
Service the machine regularly. Do not
attempt any maintenance or repair work
not described in the instruction manual.
Have all other work performed by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
Only use high-quality replacement parts
in order to avoid the risk of accidents
and damage to the machine. If you have
any questions in this respect, consult a
servicing dealer.
STIHL recommends the use of genuine
STIHL replacement parts. They are
specifically designed to match your
machine model and meet your
performance requirements.
Never attempt to modify your power tool
in any way since this will increase the
risk of personal injury.
Regularly check that the insulation of the
power cord and plug is in good condition
and shows no sign of ageing
(brittleness).
Electrical components, e.g. power cord,
may only be repaired or replaced by a
qualified electrician.
Clean plastic components with a cloth.
Do not use aggressive detergents. They
may damage the plastic.
Do not spray the machine with water.
Check tightness of mounting screws on
safety devices and the cutting
attachment and retighten if necessary.
6
FSE 60
English
282BA011 KN
Clean cooling air inlets in motor housing
as necessary.
Store the machine is a safe and dry
place.
Using the Unit
Mowing
N Hold your trimmer with both hands –
right hand on the control handle –
left hand on the loop handle.
N Stand upright – hold the unit in a
relaxed position and always on right
side of your body.
N Swing the trimmer steadily to the left
and right like a scythe, while
maintaining the required cutting
height.
N Avoid contact with fences, walls,
rocks, etc. since it will result in a
higher rate of wear.
Disposal
Do not throw cuttings in the garbage can
– they can be composted!
FSE 60
7
English
Approved Combinations of Cutting Attachment, Deflector, Handle and Harness
Cutting Attachment Deflector Handle Harness
Schnur/LINE 2
Schnur/LINE 1
1
2
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons no other
combinations are permitted – risk of
accidents.
Only mowing heads (1,2) may be used
on trimmers with a curved drivetube
and loop handle.
Cutting Attachments
3
Deflector
3 Deflector with blade for mowing
heads
Handle
4 Loop handle
Harness
5 Shoulder strap may be used
4
5
282BA010-A1
Mowing heads
1 STIHL AutoCutC52
2 STIHL AutoCutC6-2
8
FSE 60
English
1
238BA016 KN
3
A
2
A
4
1
2
3
5
A
282BA001 KN
40 mm
Mounting the Drive Tube
N Pull the protective cap off the drive
tube.
N Push the drive tube(1) into the
motor housing(2) as far as the mark
(A), turning the drive tube back and
forth at the same time.
N Tighten down the screw(3) in the
housing firmly.
Mounting the Loop Handle
Mounting the Loop Handle
N Fit the loop handle(1) on the drive
tube at a distanceA of about 30cm
from the control handle(2).
N Insert the hex nut(3) in the loop
handle(1).
N Squeeze the ends of the clamp
together, fit the M6x40 screw(4)
with washer(5) from the other side
and tighten down firmly.
Adjusting Loop Handle to Most
Comfortable Position
N Loosen the screw(4).
N Move the loop handle(1) along the
drive tube to the required position –
tighten down the screw(4) firmly.
FSE 60
9
English
1
238BA003 KN
2
238BA004 KN
4
3
238BA021 KN
9
681BA018 KN
Schnur/LINE 2
Schnur/LINE 1
2
8
Mounting the Deflector
N Push the deflector(1) over the
clamp(2) as far as stop.
N Fit the locknut(3) in the hex recess
on the deflector.
N Make sure the holes line up.
N Insert the M6x30 screw(4) and
tighten it down firmly.
Mounting the Cutting
Attachment
Placing Power Tool on the Ground
N Switch off the power tool.
N Lay your trimmer on its back with
the loop handle facing down and the
output shaft facing up.
Fitting Mowing Head without Screw
Mounting
Keep the instruction leaflet for the
mowing head in a safe place.
STIHL AutoCutC5-2
N Slip the mowing head(2) on to the
shaft – as AutoCut5-2.
N Turn the spool(9) clockwise until
the two arrow heads line up –
secure the spool in this position.
N Insert the cap(8) in the spool, press
it down as far as stop and turn it
clockwise at the same time.
N Turn the cap until you feel
resistance and then tighten it down
firmly by hand.
10
FSE 60
English
238BA008 KN
1
2
STIHL AutoCutC6-2
1
2
3
4
N Slip the mowing head(2) over the
shaft(3) and engage its hex recess
on the external hexagon(4).
N Hold mowing head (2) steady with
one hand.
N Turn the cap (1) clockwise and
tighten it down firmly by hand.
Removing the Mowing Head
Connecting to Power Supply
The voltage and frequency of the
machine (see rating plate) must match
the voltage and frequency of the power
connection.
The minimum fuse protection of the
power connection must comply with the
specifications – see "Specifications".
The machine must be connected to the
power supply via an earth-leakage
circuit breaker to disconnect the power
supply if the differential current to earth
exceeds 30mA.
The power connection must correspond
to IEC60364 and relevant national
regulations.
0000-GXX-3937-A0
Extension Cords
120V version
Minimum wire gauge for extension
cords for 120Volt appliances using
0-6amps:
Cord length(ft) 25 50 100 150
Wire size(AWG) 18 16 16 14
N Insert the plug(1) into the extension
cord coupling(2).
Strain Relief
The strain relief (cord retainer) protects
the appliance cord against damage.
N Hold the mowing head steady.
N Unscrew the cap counterclockwise.
FSE 60
230V version
Minimum cross sectional area of wires:
Cord lengths of 6,5ft (2m) or more:
1,5mm2, type H07RN-F
11
English
4
238BA009 KN
5
3
2
1
238BA010 KN
N Make a loop(3) in the extension
cord.
N Pass the loop(3) through the
opening(4).
N Slip the loop(3) over the hook(5)
and pull it tight.
N Connect the extension cord plug to
a properly installed wall outlet.
Fitting the Harness Switching On
A shoulder strap is available as a special
accessory.
Wear the shoulder strap over your left
shoulder and adjust its length so that the
spring hook lies against your right hip.
The open side of the hook should face
away from your body. Attach the spring
hook to the carrying ring (see "Main
Parts").
N Make sure you have a secure and
balanced footing.
N Hold your trimmer with both hands –
right hand on the control handle –
left hand on the loop handle.
N Stand upright – hold the trimmer in a
relaxed position and always on right
side of your body.
N The cutting attachment must not
touch the ground or any other
objects.
N Press down the starting lockout
lever(1) and hold it in that position.
N Squeeze the trigger switch(2).
12
FSE 60
Loading...