12 | FCR 28 Si www.stiebel-eltron.com
CONTENTS | OPERATION
General information
OPERATION
1. General information ��������������������������������������� 12
1.1 Safety instructions ���������������������������������������������� 12
1.2 Other symbols in this documentation ���������������������� 13
1.3 Units of measurement ����������������������������������������� 13
2. Safety �������������������������������������������������������� 13
2.1 Intended use ����������������������������������������������������� 13
2.2 General safety instructions �����������������������������������13
2.3 CE designation ��������������������������������������������������13
2.4 Test symbols ����������������������������������������������������� 13
3. Appliance description ������������������������������������� 13
4. Settings ����������������������������������������������������� 14
5. Cleaning, care and maintenance ������������������������� 14
6. Troubleshooting �������������������������������������������� 14
INSTALLATION
7. Safety �������������������������������������������������������� 15
7.1 General safety instructions ����������������������������������� 15
7.2 Instructions, standards and regulations ������������������� 15
7.3 Water connection and safety assembly �������������������� 15
8. Appliance description ������������������������������������� 15
8.1 Standard delivery ����������������������������������������������� 15
8.2 Accessories ������������������������������������������������������� 15
9. Installation �������������������������������������������������� 15
9.1 Power connection ���������������������������������������������� 16
10. Commissioning ��������������������������������������������� 16
10.1 Commissioning �������������������������������������������������� 16
10.2 Recommissioning ����������������������������������������������� 16
11. Settings ����������������������������������������������������� 17
11.1 Limiting the temperature selection ������������������������� 17
12. Troubleshooting �������������������������������������������� 17
13. Maintenance ������������������������������������������������ 17
13.1 Checking the safety assembly �������������������������������� 17
13.2 Descaling the flanged immersion heater ������������������17
13.3 Replacing the heating elements and protective pipe���� 17
14. Specification ������������������������������������������������ 18
14.1 Dimensions, immersion depths and connections �������� 18
14.2 Wiring diagrams and connections �������������������������� 18
14.3 Data table �������������������������������������������������������� 20
GUARANTEE
ENVIRONMENT AND RECYCLING
OPERATION
1. General information
The chapter "Operation" is intended for appliance users and qualified contractors.
The chapter "Installation" is intended for qualified contractors.
Note
Read these instructions carefully before using the appliance and retain them for future reference.
Pass on the instructions to a new user if required.
1.1 Safety instructions
1.1.1 Structure of safety instructions
!
KEYWORD Type of risk
Here, possible consequences are listed that may result
from failure to observe the safety instructions.
Steps to prevent the risk are listed.
1.1.2 Symbols, type of risk
Symbol Type of risk
Injury
Electrocution
Burns
(burns, scalding)
1.1.3 Keywords
KEYWORD Meaning
DANGER Failure to observe this information will result in serious
injury or death.
WARNING Failure to observe this information may result in serious
injury or death.
CAUTION Failure to observe this information may result in non-
serious or minor injury.
!