STIEBEL ELTRON Fountain User Manual

Page 1
USER MANUAL | FOUNTAIN WATER FILTER
FOUNTAIN
FOUNTAIN
High Quality
WATER FILTER
by Stiebel Eltron / Germany
Page 2
SHORT OVERVIEW.
FOUNTAIN FEATURES.
5 Stages in 1 filter
The qualities of 5 single filtration stages are combined in 1 cartridge. The high quality filter media allow for an extraordinary clean and safe filter performance.
Ultrafiltration membrane 0.01~ 0.1 micron and anti-bacterial carbon
The membrane with a pore size of 0.01~0.1 micron removes all bacteria and provides mi­crobiologically safe and clean drinking water for you and your family. Anti-bacterial carbon on the membrane prevents the growth of filtered bacteria inside the filter.
Display with indicator and beeper
The indicator and beeper alarm will set off, if the filter has to be changed. It is based on flow volume and time.
Filter replacement
The Stiebel Eltron fountain filter cartridge is easy to change. No plumber or expert is needed.
Anti-bacterial-silverlite
An anti-bacterial silver impregnated mineral stone protects the filter against contamination from the filter outlet.
One-way nozzle on the flexible pipe
This nozzle at the outlet of the flexible pipe allows a water and airflow only from the in-to the outside direction.
Any contamination from water or air from the pipe outlet is impossible.
5 IN 1
FILTER
Page 3
USER MANUAL FOUNTAIN.
CONTENT.
1. Fountain filter components ________________ 04
2. Accessories and operating instructions _______ 05
3. Filter specifications _______________________ 06
4. Installation and precautions ________________ 07
5. Installation guidelines _________________ 08-09
6. Filter replacement _____________________ 10-11
7. Display _________________________________ 12
8. Trouble shooting _________________________ 13
Page 4
USER MANUAL FOUNTAIN.
1. FOUNTAIN FILTER COMPONENTS.
1
Flexible pipe
2
Display
3
Top cover
4
Nipple
5
Battery cover
6
Reset
7
Ejector
8
Controller cover
9
Filter retaining ring
10
Base housing
11
Front valve
12
One-touch elbow fitting
13
Holes for wallmount installation
14
5 in 1 filter
1
2
4
5
3
6
7
8
9
10
11
12
13
14
Page 5
USER MANUAL FOUNTAIN.
2. ACCESSORIES AND OPERATING INSTRUCTIONS.
1
Plastic tube [1 x 1m]
2
Flexible pipe [1 x]
3
Manual [1 x]
4
Diverter valve with o-ring and cap [1 x]
5
Battery AA size [2 x]
6
Adapter [3 x], o-ring [3 x]
Model Water filter
– Type name Fountain
– Part no. 1511-222303
Characteristics
– Installation type
countertop, wallmounted
– Filter cartridge
5 in 1 composite filter
– Housing material
ABS [constructed of durable, high impact plastic]
– Max. operating pressure 4 bar
– Min. operating pressure 1 bar
– Max. operating temperature 35 °C
– Min. operating temperature 4 °C
Rated service
– Rated service flow
2.0 L per minute at 1 bar of water pressure with a new filter. [Actual flow rate will depend on water pressure and the time the filter has been in service.]
– Rated service life*
The filter is designed to ser ve a family’s cooking and drinking water needs for 12 months or 4,320 L, whichever comes first.
*NOTE: The life time will depend on the water quality. It is based on the consumption of 12 L daily.
2
5
1
4
3
6
Page 6
1
2
3
5
4
USER MANUAL FOUNTAIN.
3. FILTER SPECIFICATIONS.
Filter step Removal function
1. Polyethylene sediment filter | 5 micron
rust and sediments
2. Activated carbon block | 1 micron chlorine, bad taste and odor
THMs, VOCs
Herbicides, pesticides
heavy metals [mercury, lead, Cr6+, cadmium, selenium, iron, aluminum, zinc]
3. Granular activated carbon [silver impregnated]
chlorine, bad taste and odor
THMs, VOCs
prevents growth of filtered bacteria inside the filter
4. Ultrafiltration membrane | hollow fiber pore size 0.01~ 0.1 micron
bacteria
cysts
5. Antimic robial silverlit e [CaO,
SiO2, AlO3, MgO, MnO and Ag+]
prevents contamination from the outlet
Page 7
USER MANUAL FOUNTAIN.
4. INSTALLATION AND PRECAUTIONS.
The water filter can only be used with pre-filtered water from a water supply facility. The filter can not be used with water from unsafe water sources such as rivers and wells.
To reach an optimized and satisfying filter result the fountain should only be installed in houses with a pipe pressure between 1 and 4 bar.
The fountain must be installed in a far distance to inflammable materials and heating sources to avoid deformation.
The fountain should only be installed inside the house.
The filter can only be installed to the cold water supply with a water temperature between 4 and 35°C.
The fountain can only be installed as countertop or wallmounted type by using a diverter valve. It can not be used as under sink type.
The fountain should not be exposed to force or shock.
The fountain must be kept away or protected from direct light (e.g. sunlight).
Do not spill water on the water filter.
Do not open the filter during water flow.
1 - 4 BAR
Page 8
USER MANUAL FOUNTAIN.
5. INSTALLATION GUIDELINES
To insert the batteries remove the top cover of the filter.
Open the battery cover and insert the batteries.
Connect the diverter valve to the faucet. If needed use one of the 3 faucet adapters.
Insert the other end of the tube to the elbow fitting on the back cover until it is locked properly.
Put the top cover back on the fil­ter and connect the flexible pipe with the nipple on the top.
Connect the plastic tube to the diverter valve. Tighten the cap.
3
INSERT THE BATTERIES COUNTERTOP (FAUCET INSTALLATION)
2
1
3
2
1
Page 9
COUNTERTOP (UNDERSINK CONNECTION)*
6
USER MANUAL FOUNTAIN.
5. INSTALLATION GUIDELINES
Lock the stop valve of the cold water supply line.
Connect the outlet tube with the fountain. If necessary drill a hole.
Connect the plastic tube to the elbow fitting.
Closed
1
Detach the metal hose from the cold water supply under the sink.
3
Connect the diverter ball valve with the nipple (use teflon-tape).
2
4
Assemble the ball valve to the water supply. Re-attach the metal hose and connect the inlet tube.
5
FOUNTAIN
STIEBEL ELTRON
Open the valves and check all connections for a leakage.
Before using the filtered water as drinking water, let the water flow for at least 10 minutes.
8
7
*Additional accessories are neccessary
Page 10
10 I STIEBEL ELTRON
USER MANUAL FOUNTAIN.
6. FILTER REPLACEMENT.
Close the diverter valve.
Remove the tube by pressing the upper ring on the connector down.
*
Open the front valve and remove the flexible pipe.
Pull out the top cover.
Remove the retaining ring to unlock the filter.*
Press the ejectors to remove the filter adapter and filter.*
Separate the old filter from the adapter. Clean the inside of the filter only with
a wet or dry cloth.
*Be prepared that a little amount of water can come out of the elbow-connector and filter.
2
3 4
5
6 7
8
1
Page 11
11 I STIEBEL ELTRON
USER MANUAL FOUNTAIN.
6. FILTER REPLACEMENT.
Assemble the new filter with the adapter.
Press the assembled filter into the base housing.
Put the top cover on and connect the flexible pipe to the nipple.
9
10
11
Open the diverter and front valve to allow water flow.
Reset the filter indicator (see page
12).
15
Lock the filter retaining ring.
12
Connect the plastic tube to the elbow fitting.
14
13
Page 12
12 I STIEBEL ELTRON
USER MANUAL FOUNTAIN.
7. DISPLAY
Indicator reset after filter replacement
After changing the filter cartridge the indicator has to be reset.
Take the top cover off and press the reset button using a clip for two seconds to reset the filter. During reset, the three LEDs light up simultaneously.
Note : It is not required to reset the indicator after replacing batteries. The used water volume remains recorded in the memory.
Flickering blue lamp
Normal flow. 1 - 11 month | < 4,000 L.
Flickering red lamp
Filter replacement is needed within 1 month. 11 month | 4,000 - 4,380 L.
Flickering red lamp and beeping
The filter has to be changed immediately. 358 days | 4,300 L.
Flickering yellow lamp and beeping
The batteries have to be changed immediately.
All lamps flickering
Over- flow, c lose the valve s and check the filter.
No lamps and no beeping
Lifetime of the filter is finished. [ The fil ter mus t n ot b e u sed anymore] 12 month | > 4,380 L.
Page 13
13 I STIEBEL ELTRON
USER MANUAL FOUNTAIN.
8. TROUBLE SHOOTING.
Problems Possible cause Trouble shooting
Black color or black particles in the water. The fountain water filter contains carbon powder.
After installation small particles can occur in the water.
After installation or filter exchange let the water flow for about 10 minutes to clean the filter from possible small residual particles of carbon.
Slow water flow. The lifetime of the filter is finished. Replace the filter cartridge.
The filter is clogged. Replace the filter cartridge.
Noise in the system. There are air bubbles in the system. After installation let the water flow for about 10
minutes to remove all air from the system.
Unusual water or chlorine taste and bad odor. The cartridge does not remove chlorine and other
contaminants from the water. The life time of the filter cartridge is finished.
Replace the filter cartridge.
You have not used the filter for a while and some sediments and contaminants developed a bad smell in the system.
Open the valves and let the water flow for at least 5 minutes.
Water leakage. Tubes, fittings, nipples and flexible pipe might not
be connected properly.
Check every connection to be inserted in the proper depth.
No water flow. The diverter valve is closed. Open the diverter valve.
The front valve is closed. Open the front valve.
No light on display.
The filter life time of the filter is reached. Change the filter.
Unproper use causes water inside the PCB. Contact Stiebel Eltron service center:
035-220088
Page 14
GERMANY STIEBEL ELTRON INTERNATIONAL GMBH
|
DR.-STIEBEL-STRASSE
|
37603 HOLZMINDEN
PHONE +49 5531 7020
|
E-MAIL INFO@STIEBEL-ELTRON.COM
|
WWW.STIEBEL-ELTRON.COM
Loading...