State PVG0120O0VTA125 User Manual

C O M M E R C I A L

STORAGE TANKS

STANDARD JACKETED STORAGE TANKS

State Commercial Storage Tanks

• Ideal for increasing storage capacity when used along with water heaters and domestic hot water heating boilers.

Storage Tanks meet R12.5 minimum thermal insulation requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1

Foam Insulation

• Thick foam insulation reduces standby heat loss and saves energy.

Glasslined Tank

• Alkaline borosilicate composition is permanently fused to steel by ﬁring at a temperature of 1600°F, and will provide years of corrosion protection and dependable use at water storage temperatures up to 180°F.

(FOR SELECT MODELS)

Heavy-Gauge Steel Jacket

• With baked enamel ﬁnish.

Threaded Openings

• All tanks furnished with threaded openings for thermometer, relief valve, 2˝ recirculation lines, tankstat, and drain valve.

Anode Rod

• To provide additional corrosion protection and extra years of service, all 80 and 120-gallon models are equipped with an anode rod. Model PVG 0200 OVSA125 has two anode rods.

Installation

• Sized to ﬁt space restrictive installations, all 80 and 120-gallon models ﬁt through 30˝ doorways. Model PVG 0200 OVSA125 ﬁts through a 33˝ doorway.

5-Year Limited Tank Warranty

Suggested Speciﬁcations

Storage tank shall be a State glasslined storage tank. Tank shall be _______˝ x _______˝ and have a nominal capacity of _______ gallons. Tank(s) shall have threaded openings as shown on drawings. Interior of tank(s) shall be glasslined with an alkaline borosilicate composition which has been fused to the steel by ﬁring at a temperature of 1600˚F. Glass coating shall be continuous over the entire inner surface of the tank. Outer jacket shall have a baked enamel ﬁnish. Foam insulation to meet R12.5 minimum thermal insulation requirements of the Department of Energy and current edition of ASHRAE/IESNA 90.1. Cathodic protection shall be provided. Tank shall have a working pressure of ______ psi.

For more information on Storage Tanks contact:

State Water Heaters 500 Tennessee Waltz Parkway Ashland City, TN 37015

800.365.0024 Toll-free USA www.statewaterheaters.com

C O M M E R C I A L

16"

47"

1 7/8"

63"

5 1/4"

3 3/4"

2" NPT

RONT & REAR

3/4" NPT R

EAR

3/4" NPT

FRONT

2" NPT

FRONT & REAR

/4" NPT

REAR

2" NPT

/4" NPT

(

ANODE)

11"

19 1/2 "

32 1/4"

42 3/4"

54 7/8"

26 1/2 "

9 3/4"

2" NPT

FRONT & REAR

3/4" NPT REAR

SME PLATE

UNDER COVER

/4" NPT

RONT

" NPT

RONT & REAR

3/4" NPT REAR

3/4" NPT

(ANODE)

2" NPT

1" NPT

4 1/ 8 "

11"

42 1/4"

62"

3 1/2"

15"

4 1/4"

1" NPT

FRONT

" NPT

FRONT

2" NPT

FRONT

2" NPT

FRONT & REAR

3/4" NPT

RONT

" NPT

3/4" NPT

(ANODE)

29 3/8"

10 3/4"

17 3/4"

44 1/2 "

61 3/4"

28"

9 3/4"

21 1/4"

50 1/2 "

2" NPT FRONT

2" NPT FRONT & REAR

3/4" NPT

1" NPT

ASME PLATE

LOCATED UNDER

COVER

1" NPT

1-1/4" NPT

(ANODE)

2" NPT

77"

12 1/4"

17 1/4"

32"

12 1/4"

17 1/4"

64"

1" NPT

ASME PLATE

LOCATED UNDER

COVER

2" NPT

3/4" NPT

(ANODES)

2" NPT

STANDARD JACKETED STORAGE TANKS

MODEL NUMBER

CAPACITY ASME

PVG 0080 O0VT - Jacketed Vertical Only 80 No PVG 0120 O0VT - Jacketed Vertical Only 119 No PVG 0080 O0VTA125 80 Yes PVG 0120 O0VTA125 120 Yes PVG 0200 O0VSA125 175 Yes

NOMINAL GALLON

Figure 1

Figure 2

STANDARD

WORKING PRESSURE

APPROXIMATE

SHIPPING WEIGHT

150 236 1

150 320 3

150 369 2

150 411 4

150 560 5

REFER TO

FIGURE

Figure 3

Figure 4

For complete information on limited warranties, consult written warranty or contact technical support at 1-877-737-2840.

State Industries, Inc., reserves the right to make product changes or improvements without prior notice.

For more information on Storage Tanks contact:

State Water Heaters 500 Tennessee Waltz Parkway Ashland City, TN 37015

1-877-737-2840 Toll-free USA www.statewaterheaters.com

Figure 5