State GTS-520-NEH User Manual

RESIDENTIAL /

LIGHT COMMERCIAL

TANKLESS HIGH EFFICIENCY CONDENSING OUTDOOR MODELS

GTS-520-NEH GTS-520-PEH

FEATURES

Condensing Technology Provides Significant Energy Cost Savings

Primary Heat Exchanger is Constructed of HRS35 Commercial-Grade Copper

• Stronger than standard copper and more resilient against erosion

Secondary Heat Exchanger is Made of Type 316L Stainless Steel

• Provides additional protection against corrosion

Continuous Maximum Flow Ratesupto9.0GPM

Can be Used for Both Residential and Light Commercial Applications

ENERGY STAR

Easy-Link Up to 4 Units

• With no additional parts or accessories needed

Outdoor Models include Remote Control as a standard feature

Qualified

Electronic IgnitionNo Pilot Light

Built-In Display Shows Operating Temperature Along with Diagnostic and Error Codes

Low NOx Emissions

Complies with Lead Pluming Law

Safety Features:

• Air-Fuel Ratio (AFR) Sensor

• Exhaust & Water Temperature Safety Control

• Overheat Cutoff Fuse

Internal Freeze Protection System

Accessories

• Remote T emperatur e Controller

• Pipe Cover

• Neutralizer Kit

• Plumbing Installation Kits

Warranty

• 12-year limited warranty on heat exchanger in residential applications

• 5-year limited warranty on heat exchanger in commercial applications

• 5-year warranty on all parts

Indoor Models include both

ANSI Z21.10.3 CSA 4.3

For more information on Tankless Condensing Units, contact:

State Water Heaters 500 Tennessee Waltz Parkway Ashland City, TN 37015

1-877-737-2840 Toll-free USA www.statewaterheaters.com

a Remote Control and Power Cord as standard features

SRGSS03210 Revised March 2012

LIGHT COMMERCIAL

OUTDOOR CONDENSING MODELS

RESIDENTIAL /

GAS CONSUMPTION INPUT INLET GAS PRESSURE

MODEL

NUMBER

FUEL TYPE

MINIMUM

BTU/H

MAXIMUM

BTU/H

MINIMUM

W.C .

MAXIMUM

W.C . HEIGHT WIDTH DEPTH

All dimension in inches. 15-150 psi Water Pressure. 40 psi or above recommended for maximum flow.

12-1/2"

1/2" (12.5mm)

GAS 6" (153.6mm)

HOT 7-1/4" (182.1mm)

120VAC 8-1/2" (216.3mm)

COLD 8-5/8" (220.6mm)

10-1/2" (266.8mm)

Condensate drain port

(316mm)

25-1/2" (649mm)

4-1/2" (115mm)

120VAC 2-1/4" (58.2mm)

CLEARANCES: Top: 36”; Bottom: 12”; Front: 24”; Back: .05”; Sides: 3”

ENERGY FAC TOR

0.91

HOT/COLD

GAS CONN.

18-1/2" (470mm)

12-1/2" (320mm)

DIMENSIONS IN INCHES

25-3/5

18-1/2

3-1/2" (90mm)

4-1/2" (115mm)

1-1/4" (29.2mm) COLD

4-5/8" (116.8mm) GAS

6-1/4" (159.1mm)HOT 5-5/8" (142.2mm)

Condensate drain port

APPROX.

SHIPPING

WEIGHT

(LBS)

12-2/5

29-1/2" (751mm)

Flow Rate vs. Temperature Rise

10.0

9.0

8.0

7.0

6.0

5.0

4.0

3.0

Flow Rate (gpm)

2.0

1.0

0.0

0 20406080100120

Temperature Rise (°F)

140

Pressure Loss

Pressure Loss (psi)

0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

Flow Rate (gpm)

120

100

Head Feet

Set Temperature : 125°F & lower

Set Temperature: 130

F & Higher

For complete information on limited warranties, consult written warranty or contact technical support at 1-877-737-2840.

State Industries, Inc., reserves the right to make product changes or improvements without prior notice.

For more information on Tankless Condensing Units, contact:

State Water Heaters 500 Tennessee Waltz Parkway Ashland City, TN 37015

1-877-737-2840 Toll-free USA www.statewaterheaters.com