State GTS-140-NEH User Manual

R E S I D E N T I A L

CONDENSING HIGH EFFICIENCY GAS
TANKLESS WATER HEATERS

FEATURES

INDOOR MODEL

GTS-140

OUTDOOR MODEL

GTS-140

ANSI Z21.10.3 CSA 4.3

Ultra-Low NOx Condensing
Technology Provides 0.93
Energy Factor (EF)

Complies with California
SCAQMD Rule 1146.2 and other
Air Quality Management
Districts with similar NOx
emission requirements of
14 ng/J or 20 ppm

Durable Heat Exchangers

• Copper Primary Heat Exchanger

• Secondary Heat Exchanger is made of
Marine Grade Type 316L Stainless Steel
to protect against corrosion

Continuous Maximum Flow
Rates up to 6.6 GPM

®

ENERGY STAR

Qualified

Available in Natural Gas or
Propane (LP)

GTS-140-IN & GTS-140-OS
can be used in Residential Hot
Water and Heating Applications
(Check local codes)

Indoor Model - Includes a
Built-In Temperature Controller
and Advanced Diagnostics to
Simplify Troubleshooting

Outdoor Model - Includes a
Wall Mount Temperature Remote
Controller and Advanced
Diagnostics to Simplify
Troubleshooting

Electronic Ignition - No
Pilot Light

Factory-Installed Power Cord
Included for Indoor Models

Complies with Lead
Free Standards

Safety Features:

• Air-Fuel Ratio (AFR) Sensor

• Exhaust & Water Temperature Safety Control

• Overheat Cut-Off Fuse

Internal Freeze
Protection System

Power Direct Vent Design

• Exhaust, 3" PVC Venting up to 70 Feet or
4" PVC Venting up to 100 Feet

• Provides flexible venting with PVC, CPVC,
or ABS Pipe for Intake and Exhaust (solid
core only)

• Category III Stainless Steel venting can
also be used

Accessories

• Pipe Cover

• Neutralizer Kit

• Isolation Valve Kits

• Concentric Termination

• Recess Box

Warranty

• 15-year limited warranty on heat exchanger in
residential applications

• 10-year limited warranty on heat exchanger in
commercial applications

• 5-year limited warranty on all parts

For more information on Tankless Condensing Water Heaters contact:

State Water Heaters
500 Tennessee Waltz Parkway
Ashland City, TN 37015

800.365.0024 Toll-free USA
www.statewaterheaters.com

SRGSS00114

CONDENSING HIGH EFFICIENCY GAS
TANKLESS WATER HEATERS

R E S I D E N T I A L

GAS CONSUMPTION

INPUT

MODEL

NUMBER

INDOOR

GTS-140-NIH Natural 15,000 120,000 5.0 10.5 0.93 6.6 3/4” NPT 1/2” NPT 22-7/8 13-7/8 10-13/16 44
GTS-140 PIH Propane 15,000 120,000 8.0 14.0 0.93 6.6 3/4” NPT 1/2” NPT 22-7/8 13-7/8 10-13/16 44

OUTDOOR

GTS-140-NEH Natural 15,000 120,000 5.0 10.5 0.93 6.6 3/4” NPT 1/2” NPT 22-7/8 13-7/8 10-13/16 44
GTS-140-PEH Propane 15,000 120,000 8.0 14.0 0.93 6.6 3/4” NPT 1/2” NPT 22-7/8 13-7/8 10-13/16 44

All dimensions are in inches.
15-150 psi Water Pressure. 40 psi or above is recommended for maximum flow.
*Current numbers based on factory testing; 0.5 gpm required for activation; 0.4 gpm required for continuous fire after initial ignition.
Indoor models are certified from sea level to 10,100 ft. elevations.
In accordance with ANSI Z21.10.3, CO emission does not exceed 400 PPM for normal input.
The manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligation.

FUEL
TYPE

MINIMUM

BTU/H

MAXIMUM

BTU/H

INLET GAS
PRESSURE

MINIMUM

W.C.

MAXIMUM

W.C.

ENERGY
FACTOR

MAX

GPM*

HOT/COLD

CONN.

GAS

CONN.

DIMENSIONS IN INCHES

A

HEIGHTBWIDTHCDEPTH

UNIT

WEIGHT

(LBS)

SRGSS00114 Page 2 of 4