Heating Elements
Model No. Volts HZ 1 Phase Amps Watts Above Belt Below Belt NEMA
QCSe2-500 120 60 14.3 1700 3 3 5-15P
120 60 14.3 1700 3 3 5-20P*
QCSe2-600H 208 60 14 2800 2 2 6-20P
240 60 12.2 2800 2 2 6-20P
QCSe2-800 208 60 14 2800 2 2 6-20P
240 60 12.2 2800 2 2 6-20P
S t a r M a n u f a c t u r i n g I n t e r n a t i o n a l , I n c .
Phone: (800) 264-7827 - FAX: (800) 264-6666 - www.star-mfg.com
Star Manufacturing International Inc. - 10 Sunnen Drive - P.O. Box 430129 - St. Louis, MO 63143-3800
Dimensions Shipping Shipping Carton
A B C
Width Depth Height Weight Width Depth Height
Inches Inches Inches lbs. Inches Inches Inches
Model No. (cm) (cm) (cm) (kg) (cm) (cm) (cm)
QCSe2-500 14-5/8 22-3/8 15-5/8 64 20-1/2 19-1/2 26
(37.1) (56.8) (39.7) (140.8) (52.0) (49.5) (66.0)
QCSe2-600H 14-5/8 22-3/8 15-5/8 64 20-1/2 19-1/2 26
(37.1) (56.8) (39.7) (140.8) (52.0) (49.5) (66.0)
QCSe2-800 14-5/8 22-3/8 15-5/8 64 20-1/2 19-1/2 26
(37.1) (56.8) (39.7) (140.8) (52.0) (49.5) (66.0)
Model No. Production Capacities Product Openings
QCSe2-500 up to 500 slices per hour 1-1/2”
QCSe2-600H up to 600 slices per hour 3”
QCSe2-800 up to 800 slices per hour 1-1/2”
Specifications
Electrical Data
Typical Specifications
Conveyor toasters are constructed of corrosion resistant stainless steel. Supplied with heavy-duty motor, drive chain and fast heat
up quartz infrared heaters. A conveyor belt tension system is supplied for a smooth, quiet operation. Units are supplied with digital
programming for variable speed control, top and bottom heat control, power saver and high limit switch. Extended conveyor belt,
crumb tray, heated holding area and full width burn guard are standard. Unit has a one-piece cover for easy access with 1"
adjustable legs and a 4' cord. Units are listed with UL, CUL and are UL certified to NSF4. Patent number D459,140. Printed in the
Performance Data
QCSe2 SERIES CONVEYOR TOASTERS
WITH ELECTRONIC CONTROLS
Models QCSe2-500, QCSe2-600H & QCSe2-800
1
1
Can be supplied with metal sheathed heaters (no additional charge), however production will be reduced.
*Canadian Requirements
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star
Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached
as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
A
C
B