Star Manufacturing Q3-95ARB, Q3-95ARB-V02 Parts List

CONVEYOR

TOASTER

MODEL

Q3-95ARB

®

Installation and

Operation

Instructions

2M-Z10141 Rev. C 6/9/2007

9H-Q3-95ARB

1

SAFETY SYMBOL

Using any part other than genuine Star factory supplied parts relieves the
manufacturer of all liability.

Star reserves the right to change specifi cations and product design without
notice. Such revisions do not entitle the buyer to corresponding changes,
improvements, additions or replacements for previously purchased
equipment.

Due to periodic changes in designs, methods, procedures, policies and
regulations, the specifi cations contained in this sheet are subject to change
without notice. While Star Manufacturing exercises good faith efforts to provide
information that is accurate, we are not responsible for errors or omissions
in information provided or conclusions reached as a result of using the
specifi cations. By using the information provided, the user assumes all risks in
connection with such use.

These symbols are intended to alert the user to the presence of
important operating and maintenance instructions in the manual
accompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

NOTICE

MAINTENANCE AND REPAIRS

Contact your local authorized service agent for service or required maintenance. Please record the model
number, serial number, voltage and purchase date in the area below and have it ready when you call to

ensure faster service.

Model No.

Serial No.

Voltage

Purchase Date

Authorized Service Agent

Reference the listing provided with the unit

or

for an updated listing go to:

Website: www.star-mfg.com
E-mail [e-mail]
Telephone: [phone] Local [phone]

The Star Service Help Desk

Business 8:00 am to 4:30 p.m. Central Standard Time
Hours:

Telephone: [phone] Local [phone]

Fax: [phone] Local [phone]

E-mail [e-mail]

[e-mail]
[e-mail]

Website: www.star-mfg.com

Mailing Address: Star Manufacturing International Inc.

10 Sunnen Drive
St. Louis, MO 63143
U.S.A

2

2

SPECIFICATIONS

Q3-95ARB-V02

Rating/Connection: 4200 Watts (700W elements), 20.5 Amps at 208V

NEMA 6-30P plus with six foot oil-resistant cord

Electrical Supply: 208VAC, single phase

Approximate Weight: Installed - 60 Lbs (27.22 kg)

Shipping - 68 Lbs (30.84 kg)

Dimensions: Width: 18.5" (47.0 cm)
Depth: 22.4 (56.8 cm)
Height: 15.7" (39.7 cm)

Q3-95ARB-V04

Rating/Connection: 4200 Watts (700W elements), 17.5 Amps at 240V

NEMA 6-30P plus with six foot oil-resistant cord

Electrical Supply: 240VAC, single phase

Approximate Weight: Installed - 60 Lbs (27.22 kg)

Shipping - 68 Lbs (30.84 kg)

Dimensions: Width: 18.5" (47.0 cm)
Depth: 22.4 (56.8 cm)
Height: 15.7" (39.7 cm)

3

CAUTION

General Information

This equipment is designed and sold for commercial use only by personnel trained and

experienced in its operation and is not sold for consumer use in and around the home nor
for use directly by the general public in food service locations.

Before using your new equipment, read and understand all the instructions & labels
associated with the unit prior to putting it into operation. Make sure all people associated
with its use understand the units operation & safety before they use the unit.

INSPECTION

UN-CRATING AND INSPECTING

Unpack the unit and components from the shipping container. Remove all visible packing
material and those from inside the cooking chamber. If damage is discovered, fi le a claim
immediately with the carrier that handled the shipment. Do not operate the unit if it was
damaged during shipping. All shipping containers should be checked for freight damage
both visible and concealed. This unit has been tested and carefully packaged to insure
delivery of your unit in perfect condition. If equipment is received in damaged condition,
either apparent or concealed, a claim must be made with the delivering carrier.

Concealed damage or loss - if damage or loss is not apparent until after equipment is
unpacked, a request for inspection of concealed damage must be made with carrier within
15 days. Be certain to retain all contents plus external and internal packaging materials for
inspection. The carrier will make an inspection and will supply necessary claim forms.

ELECTRICAL CONNECTION

Disconnect the unit from the power source before installing or removing any parts.

Be absolutely sure that the ground connection for the receptacle is properly wired.

Do not connect equipment to power without proper ground connections. Improper
grounding may result in personal injury or death.

CAUTION

Allow enough space around the toaster for adequate ventilation. Do not operate the unit

without the crumb tray properly positioned. Overheating and poor toasting may occur.
Read all labels on the unit and follow their instructions.

WARNING

Before making any electrical connection to this unit, check that the power

supply is adequate for the voltage, amperage and requirements stated on the
rating plate. A wiring diagram is included.

WARNING

DO NOT CUT OR REMOVE THIS PLUG OR THE GROUNDING PRONG FROM

THE PLUG. FAILURE TO COMPLY MAY RESULT IN DEATH OR SERIOUS
INJURY.

WARNING

CONNECT/PLUG UNIT INTO DEDICATED A. C. LINE ONLY SPECIFIED ON THE

DATA PLATE OF THE UNIT.

CAUTION

SOME SURFACES ARE EXTREMELY HOT DURING OPERATION AND CARE SHOULD

BE TAKEN WHILE USING THIS UNIT.

4

ASSEMBLY AND INSTALLATION

The unit was shipped fully assembled and ready to plug into a standard outlet specifi ed for
its voltage and amp draw. If improper electrical supply is determined, contact a qualifi ed
electrician prior to using the unit. Removal and replacement of the power cord and plug
voids the warranty. For assistance, contact your local authorized service agent for service
or required maintenance.

Level unit using the adjustable feet under the unit (approximately 1/2" adjustment).

Wipe down the exterior with a damp cloth.

NOTE

The security cover prevents accidental movement of the speed control knob during routine
operations.

TOASTER SETTINGS

Before using the unit for the fi rst time, test the pass time of the conveyor belt.
The pass time through the toaster should be between 30 and 40 seconds.

1. Turn the conveyor speed knob to the 12 o'clock position.

2. Set both heat controls to HIGH and allow to 5 to 10 minutes to reach operating
temperature.

3. Place a bun on the conveyor belt.

4. Start timer, when the bun begins enters the cooking chamber

5. Stop timer when bun exits the toaster.

IF TO DARK: Increase conveyor speed knob.
IF TO LIGHT: Decrease conveyor speed knob.

6. When the bun meets all specifi cations, mark the control panel face with a marking tool
where the control knob was set.

7. Place the security device over the control knobs and secure.

8. If the bun takes longer than 40 seconds, then contact Arby's Corporation to be certain
you understand the specifi cations. If the unit still does not toast the bun in 40 seconds,
or less then contact Star Manufacturing.

DAILY OPERATION

Rotary Power Saver Switch

Turn Power Saver Switch clockwise or counterclockwise for the following settings.

Full Power

When in this position your equipment is at full power and ready to use.

Off Rotary

Two off positions are provided, a single rotation in either direction will shut the unit off.

Standby

The standby position reduces the power consumption by 75%. Using this position during
the quiet times will save electricity, and keep the toaster warm. When needed, turn the
switch to FULL POWER. Recovery time is about 30 seconds.

5