Sta-Rite SPP-Informer User Manual
45° Range, 1-10'
Pump Protection
The Informer
FEATURES
Infrared Receiver – The PENTEK
Informer uses an infrared receiver to
access data sent from the SPP,
allowing remote troubleshooting of
the system.
Infrared LED – Each PENTEK SPP is
equipped with an infrared LED that
transmits information from the
device. The Informer must be aimed
at the SPP as shown in the figure to
the left. As soon as power is applied,
the Informer begins receiving both
past and present information and
displays it on the LCD.
Status Light – The green COMM
STATUS light indicates when the
Informer is receiving data from the
SPP. If communication is lost, the
Informer will hold the last values
it received.
APPLICATIONS
■
The PENTEK® Informer… a
remote handheld diagnostic tool
designed for use with PENTEK
single-phase submersible pump
protectors (SPP-111P, 231P, 233P
and 235P) equipped with infrared
LED transmitters.
ORDERING INFORMATION
Catalog
Number
SPP-Informer 1 0.45 4.375" x 3.375" x 6.75"
Lbs.
SPECIFICATIONS
Displayed Parameters –
Diagnostic information received and
displayed in real-time: Voltage,
Current, Power, Dry Well.
Overload Trip Points
Calibration Voltage
Last Fault
Highest/Lowest Voltage Since
Last Calibration
WEIGHT
Kg
Carton Size
PENTEK® is a registered trademark of Pentair Water.
Customer Service: (888) 782-7483
Fax Orders: (800) 426-9446 www.sta-rite.com
•
1
Pentair Water
•
Delavan, WI 53115 USA
•
•
S6310WS
(5/11)
Loading...