Sta-Rite S7MD60 User Manual

System 3

…

Mod D.E. Filters for Inground Pools

by Sta-Rite

The world’s finest pool filtration

To enjoy the clearest, cleanest water in your pool,

install the Sta-Rite® System 3® Mod D.E. pool f ilter, the

latest advance in diatomaceous earth (D.E.) filtration.

Diatomaceous earth, a natural substance, is so fine it

traps dirt and debris as small as five microns (1⁄10 the

width of a human hair). That means body oils, suntan

lotions, pollens, dust and even some bacteria are trapped

in the filter, leaving behind sparkling clear, healthier water.

…

The System 3 Mod D.E. also has a clear advantage over

traditional-style D.E. filters:

Single module replaces complicated multi-grid

•

assemblies that are difficult to clean and reassemble.

Unique balanced-flow tank design maximizes the use

•

of the module’s surface area to trap more dirt and

reduce the frequency of cleaning.

…

An Eco Select™ Brand Product

The Eco Select™ brand identifies our “greenest” and most

efficient equipment choices. As an Eco Select brand

product, System 3 Mod D.E. efficiently filters water, often

allowing the use of smaller pumps or lower pump speeds

to minimize energy use. And, it helps significantly reduce

water use by allowing you to rinse the cartridges rather

than backwash.

…

System 3

Mod D.E. Pool Filters

…

An up-close look

Top-mounted pressure gauge is conveniently positioned for easy reading.

Stands tough year after year

Dura-Glas™, Sta-Rite’s exclusive high-density composite resin, will never corrode and weathers the elements.

Safe, easy access

Posi-Lok™ clamps provide safe, easy access to the filter module. 50/50 split-tank design permits rinse-in-place cleaning. Fast in, fast out!

Smooth running

2” plumbing ports improve hydraulic flow for greater efficiency.

Easy on the eyes

Sleek, contemporary styling blends beautifully with any poolscape.

Superior in every way

The System 3® Mod D.E. filter removes dirt particles up to 10 times

smaller than the particles removed by sand and cartridge filters.

Compared to other D.E. f ilters, the System 3 is far less complicated

to service. If you’re the do-it-yourself type, you save time. If you leave

the maintenance to a pool service, saving time means saving money!

…

Less maintenance. . .YES!

The balanced-flow tank design directs water through

both sides of the filter module, which increases

dirt-loading without clogging. Holding more dirt

means a longer time between cleanings.

Filter Performance

For Pools Optimal

up to (Gal.) Filter Area Performance D.E. Required Model 8 Hr. Turnover (Sq. Ft.) at this GPM

S7MD60 43,200 60 60 – 90 9

S7MD72 51,800 72 72 – 108 11

Do not use more D.E. than shown here. Mixed results with D.E. alternatives.

Operating Limits – Maximum continual operating pressure is 50 PSI. For pool/ spa (bather) applications, the maximum operating water temperature within the filter is 104°F (40°C).

One-year limited warranty. See warranty for details.

(lbs.)

Easy, two-way cleaning

For quick cleaning, simply move the valve lever to

the backwash position—that’s it! For more thorough

cleaning, remove the tool-free tank lid and spray-rinse

the module* while it’s still in place. In minutes, it’s

ready for another season.

Modules used in conjunction with certain pool/spa sanitizers may require soaking in special cleaning solutions.

Available from:

www.staritepool.com Phone: 800-831-7133

pumps / filters / heaters / heat pumps / automation / lighting / cleaners / sanitizers / water features / maintenance products