ST STM3210E-SK-KEI User Manual

STM3210E-SK/KEI

Keil™ starter kit for STM32F1 series Performance and Access Line

microcontrollers (STM32F103ZE MCU)

Data brief

Features

■ The Keil MDK-Lite development tools:

– µVision®4 IDE/Debugger for application

programming and debugging
– ARM C/C++ compiler
– RTX real-time kernel, a multi-tasking

operating system for embedded

applications
– MDK-Lite supports applications with up to

32 KB code-size

■ ULINK-ME in-circuit debugger/programmer

with USB interface to host PC and 20-pin JTAG
or 10-pin CoreSight debug interface

■ Full-featured Keil evaluation board with a

72 MHz STM32F103ZE MCU

Description

The Keil starter kit is a complete, cost-effective
solution for starting application development and
evaluating the STMicroelectronics
STM32F101/102/103 ARM Cortex™-M3
processor-based microcontrollers.

Table 1. Device summary

Reference Order code

STM3210E-SK/KEI

for STM32F

101/102/103

microcontrollers

STM3210E-SK/KEIL

The STM3210E-SK/KEIL starter kit provides all
the hardware and software you need to start
developing applications for the STM32 ARM core­based families of microcontrollers. It comes
complete with a full-featured evaluation board
(including USB device, CAN, USARTs, Audio,
MicroSD Card interface and QVGA LCD), Keil's
MDK-ARM Lite Edition (32 KB) development
tools, and the ULINK-ME™ (USB/JTAG) adapter.

Keil starter kits are available for a full range of ST
ARM core-based microcontrollers.

May 2012 Doc ID 018595 Rev 3 1/4

For further information contact your local STMicroelectronics sales office.

www.st.com

4

Starter kit architecture STM3210E-SK/KEI

Starter kit architecture

Keil development software is a suite of software development tools for creating and

debugging microcontroller applications that includes:

● µVision3

Compilation Tools and Keil’s debugging software so that users can quickly and easily
develop and debug their applications while they run on a target microcontroller.

● ARM RealView Compilation Tools (RVCT) 32 KB code-size limited version of the

optimizing C/C++ compiler for ARM™ core-based microcontrollers.

● ULINK-ME™ USB/JTAG in-circuit debugger / programmer, which integrates fully with

µVision3, allowing users to download the application to the target and debug it while it
runs on the ST ARM core-based microcontroller on the evaluation board.

● Keil™ evaluation board, an application board that provides a full range of features to

help users evaluate and start developing applications for the included
STM32F103ZETx microcontroller. The Keil MCBSTM32E evaluation board includes the
following key features:

– 1 Mbyte external RAM, FSMC

– 8 Mbyte external Flash, SPI

– Micro SD/MMC card connector

– 20-pin JTAG connector

– 20-pin trace tool connector

– Power supply from USB

– USART connector

–SPI

–I

– CAN connector

– USB connector

– 8 user LEDs

– QVGA LCD display

– Potentiometer connected to ADC

– 4 user and wake-up push buttons

– Reset button

– Wrap area

–Joystick

®

integrated development environment, which integrates the ARM RealView

2

C

Ordering information

All Keil starter kits can be ordered from Keil. Starter kits are available from your nearest
STMicroelectronics distributor or sales office for STM32 Performance and Access Line
microcontrollers with 512 K Flash (ST order code: STM3210E-SK/KEIL).

For more information and documentation, please refer to the Keil web site or the
STMicroelectronics microcontroller support site at www.st.com.

2/4 Doc ID 018595 Rev 3