Features
■ Three 5 V power supply options:
–power jack
– USB connector
– daughterboard
■ Boot from user Flash, system memory or
SRAM
■ I2S audio DAC, stereo audio jack
■ 128 Mbyte MicroSD Card™ or bigger
■ Both A and B type smartcard support
■ 64 or 128 Mbit serial Flash, 512 Kx16 SRAM,
512 Mbit or 1 Gbit NAND Flash and 128 Mbit
NOR Flash
■ I2C/SMBus compatible serial interface
temperature sensor
■ Two RS-232 channels with RTS/CTS
handshake support on one channel
■ IrDA transceiver
■ USB 2.0 full speed connection
■ CAN 2.0A/B compliant connection
■ Inductor motor control connector
■ JTAG and trace debug support
■ 240x320 TFT color LCD
■ Joystick with 4-direction control and selector
■ Reset, wakeup, tamper and user buttons
■ 4 color LEDs
■ RTC with backup battery
Table 1. Device summary
Order code Reference
STM3210E-EVAL
STM3210E-EVAL evaluation board
Data brief
Description
The STM3210E-EVAL evaluation board is a
complete development platform for
STMicroelectronic's ARM Cortex-M3 core-based
STM32F103ZET6 or STM32F103ZGT6
microcontroller. The range of hardware features
on the board help you to evaluate all peripherals
(LCD, SPI Flash, USART, IrDA, USB, audio, CAN
bus, smartcard, MicroSD Card, NOR Flash,
NAND Flash, SRAM, temperature sensor, audio
DAC and motor control) and develop your own
applications.
STM32F103ZET6 or
STM3210E-EVAL
September 2011 Doc ID 17708 Rev 3 1/3
For further information contact your local STMicroelectronics sales office.
STM32F103ZGT6 evaluation
board
Extension headers make it easy to connect a
daughterboard or wrapping board for your specific
application.
www.st.com
3
STM3210E-EVAL hardware block diagram
Figure 1 is a block diagram of the STM3210E-EVAL hardware.
Figure 1. Hardware block diagram
STM3210E-EVAL
Demonstration software
Demonstration software is preloaded in the board’s Flash memory for easy demonstration of
the device peripherals in stand-alone mode. For more information and to download the
latest version (version 1.1 or later is required), refer to www.st.com.
Revision history
Table 2. Document revision history
Date Revision Changes
06-Aug-2010 1 Initial release.
29-Oct-2010 2 Modified microcontroller.
23-Sep-2011 3 Added reference STM32F103ZGT6.
2/3 Doc ID 17708 Rev 3
STM3210E-EVAL
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 17708 Rev 3 3/3
Loading...