Keil™ starter kit for STM32F1 series Connectivity Line
microcontrollers (STM32F107VC MCU)
Features
■ The Keil MDK-Lite development tools:
– µVision®4 IDE/Debugger for application
programming and debugging
– ARM C/C++ compiler
– RTX real-time kernel, a multi-tasking
operating system for embedded
applications
– MDK-Lite supports applications with up to
32 KB code-size
■ ULINK-ME in-circuit debugger/programmer
with USB interface to host PC and 20-pin JTAG
or 10-pin CoreSight debug interface
■ Full-featured Keil evaluation board with a
72 MHz STM32F107VC MCU
Description
The Keil starter kit is a complete, cost-effective
solution for starting application development and
evaluating the STMicroelectronics
STM32F105/107 ARM Cortex™-M3 processorbased microcontrollers.
STM3210C-SK/KEI
Table 1. Device summary
Reference Order code
STM3210C-SK/KEI
for STM32F105/107 series
microcontrollers
Data brief
STM3210C-SK/KEIL
The STM3210C-SK/KEIL starter kit provides all
the hardware and software you need to start
developing applications for the STM32 ARM corebased families of microcontrollers. It comes
complete with a full-featured evaluation board
(including Ethernet, USB host and device, CAN,
USARTs, Audio, and QVGA Touchscreen LCD),
Keil's MDK-ARM Lite Edition (32 KB)
development tools, and the ULINK-ME™
(USB/JTAG) adapter.
Keil starter kits are available for a full range of ST
ARM core-based microcontrollers.
May 2012 Doc ID 018594 Rev 3 1/4
For further information contact your local STMicroelectronics sales office.
www.st.com
4
Starter kit architecture STM3210C-SK/KEI
Starter kit architecture
Keil development software is a suite of software development tools for creating and
debugging microcontroller applications that includes:
● µVision3
Compilation Tools and Keil’s debugging software so that users can quickly and easily
develop and debug their applications while they run on a target microcontroller.
● ARM RealView Compilation Tools (RVCT) 32 KB code-size limited version of the
optimizing C/C++ compiler for ARM™ core-based microcontrollers.
● ULINK-ME™ USB/JTAG in-circuit debugger / programmer, which integrates fully with
µVision3, allowing users to download the application to the target and debug it while it
runs on the ST ARM core-based microcontroller on the evaluation board.
● Keil™ evaluation board, an application board that provides a full range of features to
help users evaluate and start developing applications for the included
STM32F107VCTx microcontroller. The Keil MCBSTM32C evaluation board includes
the following key features:
– 20-pin JTAG connector
– 10-pin ARM Cortex-debug connector
– 20-pin trace tool connector
– Power supply from USB
– Motion sensor/ accelerometer
– USART connector
–SPI
–I
– 2 CAN connectors
– Micro USB connector
– Ethernet connector
– 8 user LEDs
– QVGA LCD display with touchscreen
– 8K - External Flash, I2C
– Micro SD/MMC card connector
– Potentiometer connected to ADC
– 4 user and wake-up push buttons
– Reset button
– Wrap area
–Joystick
– Audio: Line-out/ Headphone
– Audio: Line-in/ Microphone
®
integrated development environment, which integrates the ARM RealView
2
C
2/4 Doc ID 018594 Rev 3
Loading...