INTRODUCING
®
the Marley
MD Cooling Tower
/ The right answer in so many ways /
For decades, SPX Cooling Technologies has been
a leading producer of counterflow cooling towers
for large industrial installations. The Marley MD
takes advantage of this experience by bringing it
down to size.
The Marley MD is a packaged tower, which
makes it a definite go-to solution for light
industry and HVAC applications.
Marley Quality
On A Whole New Scale
We’re well known for our outstanding crossflow
systems. So why select a counterflow tower?
Because the Marley MD tower provides
comparable capacity with a smaller footprint,
expanding the landscape of possible uses.
Marley MD Cooling Tower:
The Right Answer in So Many Ways
Unmatched reliability
Heavy-duty construction,
high-performance design and our
five-year mechanical warranty ensures
consistent, CTI-certified, fully rated
cooling over a wide range of flow and
temperature requirements.
Smaller footprint
Induced draft counterflow design
requires less plan area than
crossflow towers. And because
the tower’s size results in less steel
used, its reduced weight requires
less support structure.
Ease of maintenance
SPX has worked hard to address
the maintenance difficulties long
associated with counterflow towers.
Our MD tower provides larger access
doors, easily removable block fill
and other features that simplify
maintenance. For European towers,
an optional fill removal access door is
now available that complies with HSE
ACoP L8 requirements.
Low energy consumption
Induced draft counterflow equipment
minimizes the energy consumption
by providing lower fan energy than
centrifugal fan counterflow units.
Low-noise
The Marley MD comes standard
with our CTI-certified low-noise fan,
suitable for most noise-sensitive
situations.
Superior Water
Management
To address the “splash-out”
problem typically found in
competitive counterflow
designs, SPX introduces an
industry first: a triple-pass
inlet louver and drift eliminator
that conserves water and
improves winter operation.