Page 1
Dana Driveshaft Direct Program
10 Series (Full Round)
Series
Yoke Dim (E)
Bearing Dim (D)
1610
5.312
1.875
1710
6.094
1.938
1760
7.000
1.938
1810
7.547
1.938
Series
Yoke Dim (E)
Bearing Dim (D)
1610
5.312
1.875
1710
6.094
1.938
1760
7.000
1.938
1810
7.547
1.938
Step 1: Identify U-Joint Series and Type – Tick the Appropriate
Customer Specification Form
Company Name Date
Contact Name Phone Number
Contact Email
Dana Assembly Number
Customer Assembly Number
Competitor Assembly Number
How to use this form:
Complete the three step process (1) Identify the UJ series and type (2) Identify driveshaft type (3) Provide the required
driveshaft measurements. The completed form can be sent directly to Dana Customer Service by pressing the submit
form button. For any assistance with completing this form, please call 1300 00 DANA.
With help from the Spicer ® Yoke Ruler you can quickly and easily identify the proper driveshaft series.
10 Series (Half Round)
Page 2
(A) (B) (C)
SPL Series
Series
Yoke Dim (E)
Bearing Dim (D)
170
6.456
2.165
250
6.417
2.362
Compact Series
Series
Yoke Dim (E)
Bearing Dim (D)
2055
5.984
2.244
2060
6.602
2.323
2065
6.772
2.559
Step 2: Identify Driveshaft Type – Tick All Appropriate Boxes
Transmission
(A) Coupling Shaft (Centre Bearing) (B) Main Shaft (Slip Assembly) (C) Inter Axle Assembly
Forward Rear Axle
Rear Rear Axle
Page 3
Step 3: Driveshaft Measurements in Millimetres
Coupling (Centre Bearing) Shaft (Record measurements in appropriate box)
Centre of Weld to Centre of Weld
Centre of U-Joint to End of Yoke
Phased (Yes / No)
Centre of Weld to Centre of Weld
Centre of U-Joint to End of Yoke
Phased (Yes / No)
Centre of Weld to Centre of Weld
Centre of U-Joint to End of Yoke
Phased (Yes / No)
Page 4
Main Shaft (Slip assembly) (Record Measurements in appropriate Box)
Centre to Centre
Weld to Weld
UJ to Slip End
10 Series
Centre of Weld to Centre of Weld
Centre of U-Joint to Centre of U-Joint
Centre of U-Joint to end of Slip Yoke
Installed in Vehicle Y / N
Removed from Vehicle & Collapsed Y / N
SPL Series
UJ to Slip End
Centre to Centre
Compact Series
UJ to Slip End
Weld to Weld
Weld to Weld
Centre of Weld to Centre of Weld
Centre of U-Joint to Centre of U-Joint
Centre of U
Installed in Vehicle Y / N
Removed from Vehicle & Collapsed Y / N
-Joint to end of Slip Yoke
Centre to Centre
Flange to Flange
Centre of Weld to Centre of Weld
Centre of U-Joint to Centre of U-Joint
Centre of U-Joint to end of Slip Yoke
End of Flange to End of Flange
Installed in Vehicle Y / N
Removed from Vehicle & Collapsed Y / N
Page 5
Interaxle assembly (Record Measurements in appropriate Box)
Centre to Centre
UJ to Slip End
Weld to Weld
10 Series No Tube HR & FR
Centre of U-Joint to Centre of U-Joint
Centre of U-Joint to end of Slip Yoke
Installed in Vehicle Y / N
Removed from Vehicle & Collapsed Y / N
10 Series with Tube HR & FR
(Same Dimensions as above required in addition the tube length is required)
SPL Series No Tube
Centre to Centre
Centre of U-Joint to Centre of U-Joint
Centre of U-Joint to end of Slip Yoke
Centre of Weld to Centre of Weld
Installed in Vehicle Y / N
Removed from Vehicle & Collapsed Y / N
Centre of U-Joint to Centre of U-Joint
Installed in Vehicle Y / N
Removed from Vehicle & Collapsed Y / N
Page 6
SPL Series with Tube
Centre of U-Joint to Centre of U-Joint
Centre of U-Joint to end of Slip Yoke
Centre of Weld to Centre of Weld
Installed in Vehicle Y / N
Removed from Vehicle & Collapsed Y / N
Centre of U-Joint to Centre of U-Joint
End of Flange to End of Flange
Installed in Vehicle Y / N
Removed from Vehicle & Collapsed Y / N
Weld to Weld
Flange to Flange
Centre to Centre
Submit Form
(Same Dimensions as above required in addition the tube length is required)
Compact Series
Please double check all measurements. Once complete and checked please click on "Submit
Form" to alert Dana Customer Service
For all Dana parts and service information visit www.spicerparts.com or www.dana.com.au
Loading...