Spicer D2200F User Manual
A
3.5"
B
5.0"
A
3.5"
A
3.5"
Bulletin: ABIB-0803r1
Date: December 6, 2011
Bulletin Type: Service
Topic: D2000F, D2200F RECOMMENDED SERVICE PARTS STOCKING LIST
__________________________________________________________
Affected Models:
D2000F, D2200F Steer Axles
This bulletin details the recommended stocking of service parts for dealers or fleets that use Dana Steer axle
models D2000F and D2200F that were production released in 2005. The population for these is such that
any fleets that are utilizing them and beginning to do regularly scheduled maintenance on them should
consider having them on their shelf to avoid any down time.
In the chart below, the most popular production assembly part numbers are listed along w/ the design type by
beam drop. There are two design beam options, 3.5” and 5” beam drops. The actual kingpin kits differ by the
draw key design as the 3.5” drop beams use a “same side” draw key design and the 5” drop beams use an
“opposite side” draw key design. Simply follow the group reference code in the chart below and use this to
find the list of recommended parts for those assemblies.
Dana Assembly
Rank
Part-no on tag
1 220BN107-1
2 220BN106-5
3 220BN107-2
4 220BN108-2
220BN206-18 or
5
220BN107-52
D2000F & D2200F Dana Steer Axle Assembly Part Numbers
Find Ref Code
in Chart for
Major Parts
Listing Beam Drop Specific Model
D-2000F
D-2000F
D-2000F
D-2200F Note: This assembly uses Type "B" Tie Rod Arms !
A 3.5"
D-2000F Note: This assembly uses Type "A" Tie Rod Arms !
Comments
Page 1 of 2
IN
FORMATION BULLETIN - ABIB-0803r1 – D2000F, D2200F RECOMMENDED SERVICE PARTS STOCKING LIST
Spicer Part-No.
331435
220TR129-2
220TR130
220TR131
220TR145-1
220TR145-2
220SA150-1
220SA148-1
331434
220TR114-1
220TR118
220TR119
220SA140-1
220SA142-1
220TR145-5
220TR146-5
220SK138-2
220SK139-2
Spicer D2000F, D2200F Steer Axle Service Parts
Group
Ref
Code
A
B
A and B
Beam
Drop
3.5"
Beam
Drop
5.00"
Beam
Drop
Part Description Notes
Kingpin Kit
Tie Rod Assy - Complete Adjustment Range: 63.00" - 67.50" 1
Tie Rod End - LH Straight End Design - 7.5"
Tie Rod End - RH Straight End Design - 7.5"
Tie Rod Arm - LH
Tie Rod Arm - RH
Steer Arm - LH
Steer Arm - RH
Kingpin Kit
Tie Rod Assy - Complete Adjustment Range: 63.00" - 67.50"
Tie Rod End - LH Drop Style End Design - 12.69"
Tie Rod End - RH Drop Style End Design - 12.69"
Steer Arm - LH
Steer Arm - RH
Tie Rod Arm - LH
Tie Rod Arm - RH
Knuckle Assy - LH knuckles common to both designs 1
Knuckle Assy - RH knuckles common to both designs
Used on 3.5" Drop Beam, same side
draw key design 2
Used on 5" Drop Beam, opposite side
draw key design
Recommended
Dealer Stocking
(Based on Fleet Size
of 10)
2
2
1
1
1
1
2
1
2
2
1
1
1
1
1
331434 Kingpin Kit - 5" Drop Beam
Draw Key Design: Dual Draw Key-Opposite Side
Spicer Part-no Description
220HC100 THRUST BEARING 2
220HP100-1 KEY-DRAW-INNER 2
220HP100-2 KEY-DRAW-INNER 2
1460HN100 BELLEVILLE WASHER 8
220HN103 DRAW KEY HEX NUT 4
160HS100-1 SHIM 2
160HS100-2 SHIM 2
160HS100-3 SHIM 2
160HD105 BUSHING 4
160HH100 SEAL-OIL 4
971010 INSERT - FOAM 4
971370 KNUCKLE CAP 4
1001414 GREASE FITTING-90DEG 4
220SC110 KNUCKLE PIN 2
Qty
331435 Kingpin Kit - 3.5" Drop Beam
Draw Key Design: Dual Draw Key-Same Side
Spicer Part-no Description
220HC100 THRUST BEARING 2
220HP100-2 KEY-DRAW-INNER 4
1460HN100 BELLEVILLE WASHER 8
220HN103 DRAW KEY HEX NUT 4
160HS100-1 SHIM 2
160HS100-2 SHIM 2
160HS100-3 SHIM 2
160HD105 BUSHING 4
160HH100 SEAL-OIL 4
1001414 GREASE FITTING-90DEG 4
971010 INSERT - FOAM 4
971370 KNUCKLE CAP 4
220SC112 KNUCKLE PIN 2
Qty
The material contained in this bulletin is product improvement information. Dana Corporation is
committed to, or liable for, canvassing existing products.
not
Page 2 of 2
Loading...