Sper Scientific 800100 User Manual

SPER

SPER

SPER SPER
SCIENTIFIC

SCIENTIFIC

SCIENTIFIC SCIENTIFIC

800100 IR Thermometer/

ideal for quick field inspections in HVAC, Industrial Hygiene and other applications, while the pen sized case makes it convenient
to carry and insures it is always on hand. Since the flashlight has a separate battery, the thermometer will work even when the
flashlight battery is dead. The infrared (IR) lens has a protective twist on/off cover.

LED Light Pen is unique in two respects: The bright white LED light on one end makes the thermometer

Description:

1. IR Lens (without cover)

2. LCD with backlight

3. IR Button

Operation:

1. Press LED Light button (6) to use the LED Light (7). Press the button again to turn the LED Light (7) off.

2. For IR measurement, unscrew the protective cover, point the IR Lens (1) at the target and press the IR button (3). The
measurement is displayed on the LCD (2).

3. Measurement is constantly updated as long as the IR button (3) is depressed.

4. When the IR button (3) is released, the last measurement remains on the LCD (2) until the unit turns off (approximately 15
seconds), or until the IR button (3) is pressed again.

5. When the IR measurement is displayed on the LCD, the backlight will turn on and remain active for 10 seconds.

Note: Readings may fluctuate if the pen is moved during measurement. This thermometer is not intended for medical evaluations.

°F/°C: To switch between temperature scales, gently insert the end of a paperclip into the pick hole on the back (opposite the IR
button (3). The LCD (2) displays the selected scale.

1:1 Distance-to-Spot: The target must be larger than the spot size. The farther you are from the object, the larger the spot.
For example, if you are 2 feet from the target, the measured area is a 2 foot radius.

4. Battery Access

5. Batteries

6. LED Light Button

7. LED Light

1 2 3 4 5 6 7

Emissivity is the ability of an object to emit or absorb energy. This instrument measures emitted energy using a fixed emissivity
value of 0.95 (which covers about 90% of typical applications). When measuring highly reflective surfaces, apply masking tape to
the surface or a paint that has a 0.95 emissivity. If the object you are measuring is covered with frost, clear the frost to expose the
object's surface before taking the measurement.

Battery Replacement:

1. Thermometer: When the battery icon flashes on the LCD (2), the thermometer battery is low and should be replaced. Twist

off the Battery Access (4) and replace the two 1.5V LR44 batteries (5).

2. LED Light: When the flashlight is dim or fails to operate, the battery should be replaced. Twist off the Battery Access (4) and

replace the 1.5V AAA battery (5).

Care: Keep the protective cover on the IR Lens (1) when not in use. Clean the lens with compressed air, use a soft brush, or
carefully wipe the surface with a moist cotton swab. Do not use solvents. The housing may be cleaned with a moist cloth.
Protect the instrument from water, physical or electrical shock, dust, and extreme environments.

Specifications:

• Temperature range: -27o ~ 482oF (-33° ~ 250°C), Resolution: 0.1oF/0.1°C when under 200°C, 1oF/1°C when over 200°C,

Response time: 1 second.

• Accuracy: ±2% or 2°C, whichever is greater.

• Operating temperature: 32o ~ 122oF (0°~ 50°C), Storage temperature: -4o~ 138oF (-20°~ 60°C).

• Dimensions: 6" x 1/2" (152 x 13mm), Weight: 2 oz (60 g).

• Included Accessories: Foam-lined metal carrying case, batteries and instructions.

Warranty: Sper Scientific warrants this product against defects in materials and workmanship for a period of 5 years from the
date of purchase, and agrees to repair or replace any defective unit without charge. If your model has since been discontinued,
an equivalent Sper Scientific product will be substituted if available. This warranty does not cover damage resulting from
accident, misuse, or abuse of the product. To obtain warranty service, ship the unit postage prepaid to:

SPER SCIENTIFIC LTD, 7720 E Redfield Rd, Suite 7, Scottsdale, AZ 85260 USA

WWW.SPERSCIENTIFIC.COM, [e-mail].

The defective unit must be accompanied by a description of the problem and your return address. Register your product online
or return your warranty card within 10 days of purchase.

Rev 6/3/10