FOR INDIVIDUAL
SLIDING DOORS
Maximum security.
3165LX.b ELECTRIC
LOCKING SYSTEM
The 3165LX.b system includes several versions of a system designed for locking, unlocking and propelling sliding doors in safety vestibules, in dayrooms or in high-traffic corridors.
Each 3165LX.b model utilizes an electric motor to operate the door through a rack and pinion drive mechanism. Doors are locked at top and bottom in both the open and closed positions by means of a concealed vertical lock bar at the rear jamb of the door. The vertical lock bar is deadlocked at a third locking point inside the horizontal cover box above
the door. Standard clear door opening widths available are 3' 0" to 4' 6".
FUNCTION:
ELECTRIC - A remote switch activates a motor which raises a vertical lock bar and propels the door open or closed.
MECHANICAL - Manual unlocking is provided for each device. After being manually released, door movement is by hand. The door automatically deadlocks when moved to the fully open or
closed position.
L O C K I N G S Y S T E M S
3165LX.b ELECTRIC LOCKING SYSTEM
TECHNICAL DATA: |
• ELECTRICAL: |
|
Motor: 1/8 HP,115 VAC, |
||
|
||
• COVER BOX: |
60 Hz., single phase power |
|
1' 0-3/4" H x 7-1/2" D |
Inrush: 1.1A |
|
• COVER BOX MATERIAL: |
Running: .9A |
|
7 gauge steel plate |
Locked Rotor Current: 3.1A |
|
• HINGED PANEL: |
|
|
10 gauge steel |
• WIRE REQUIREMENTS: |
|
• DOOR ROLLERS: |
When electric operation of the |
|
3" diameter, with |
door is from a remote station, a |
|
sealed bearings |
minimum of five conductors |
|
• VERTICAL LOCK BAR |
(minimum 14 gauge) are |
|
DIMENSIONS: |
required between the control |
|
5/8" SQ by full height |
point and the door, except for |
|
of door |
those models having the letter |
|
• FINISH: Prime paint |
“K” (keyswitch) in the suffix. |
|
• DOOR HANGER: |
Keyswitch models require |
|
7 gauge steel plate |
minimum six conductors. |
Revised 3/09
FOR MORE INFORMATION, PLEASE CALL 210-533-1231 B23