JAMB MOUNTED FOR SWINGING DOORS
Minimum and medium security.
10300MD-NL-GIC-1: KEYED ONE SIDE 10300MD-NL-GIC-2: KEYED BOTH SIDES
APPLICATION:
Minimum and medium security swinging doors that are to be unlocked from a remote location. Jamb mounted.
Door position indicator switch, door closer and heavy duty door pull are recommended.
FUNCTION:
HaLf CYCLE HOLDBaCK - Remote two-position maintained contact switch is required for this function. Latchbolt is retracted electrically when switch is in open position. When remote switch is returned to locked position, latchbolt will extend when door is opened approximately 2". Specify “D”. UL listing not available with this function.
NO LaTCHBaCK - allows latchbolt to extend without opening door. Normally used with “D” function. Specify “NL”.
MECHaNICaL - Latchbolt is retracted with a builder’s hardware key at the door, and remains retracted until key is returned, then it releases and automatically latches and deadlocks when the door is closed.
STANDARD FEATURES:
•Deadlock indication switch
•Strike with security fasteners
•faceplate with security fasteners
•Plug connector
•High torque motor
•Overcurrent and overtemperature circuit protector. The protector requires no manual resetting or replacement.
•fail secure
•Mounting fasteners
—continued on back
E L E C T R I C L O C K S
10300MD-NL-GIC ADTEC 2104 RETROFIT MOTOR OPERATED ELECTRO-MECHANICAL DEADLATCH
5909 West Loop South, Suite 310, Bellaire, Texas 77401 USA
Tel 281.300.3023 • Fax 713.583.6235
OFICINA DE REPRESENTACION: Rio Nilo No. 71, Mexico, D.F. 06500
Tel 55.5511.7041 • Fax 55.5208.2859 geotexic.com • info@geotexic.com
11/1/11
Loading...