Southern Folger 205 User Manual

205 HINGE

SF 205FS: FULL SURFACE HINGE
SF 205G: GAP HINGE

APPLICATION

Swinging doors at cells, corridors,
plumbing chases, gates or other
locations where a higher degree of
security is required. Available in full
surface or gap type configuration.

A C C E S S O R I E S

SOUTHERN FOLGER 205 HINGE

Leaf configuration can be any
combination of solid leaf for weld-on or
pre-drilled leaf for bolt-on.

Continuous non-removable hardened
steel alloy pin. Smooth operating radial
and thrust polymer bearings.

TECHNICAL DATA

Size: 5"H x 4-1/2" W x 1/2" TK (FS)

5"H x 6" W x 1/2" TK (GAP)
Weight: 5 lbs.
Pin Size: 5/8" diameter.
Barrel Size: 1-1/2" diameter.
Barrels/Leaves: Cold rolled steel.
Finish: USP.

Exceeds all criteria for ASTM F1758 for
detention hinges for Double Weight
Grade 1.

Made in USA.

SF 205G:

GAP HINGE

SF 205FS:

FULL SURFACE HINGE

Weight capacity 800 pounds per weld-on
hinge.

NOTE: These hinges are not direct
replacements for the Folger Adam #5
Hinge or the Southern Steel 205 Hinge
due to barrel size difference.

Revised 12/11

TO ORDER, PLEASE CALL 210-533-1231

SF7