Southern Folger 1058M User Manual

JAMB MOUNTED FOR
SLIDING DOORS

Maximum security.

E L E C T R I C L O C K S

1058M

MOTOR OPERATED

ELECTRO-MECHANICAL

1058M-1: KEYED ONE SIDE
1058M-2: KEYED BOTH SIDES

APPLICATION:

For sliding doors where electric
unlocking from a remote station
is required. Lock is jamb
mounted. A hook-type lock bolt
engages a keeper in hollow
metal door. Sliding door
normally
1300 Track Set with internal
door position indication switch.
Heavy-duty door pulls are
recommended.

requires a Model

FUNCTION:

ELECTRIC - Remote switch
activates a motor which raises
the hookbolt. Spring-loaded,
deadlock actuator pin then
pushes the door open
approximately
door

automatically latches

and

deadlocks upon closing.

1” to 3”. The

DEADLATCH

MECHANICAL - Hookbolt is
raised by paracentric key at
the

door. Automatic deadlatch
feature
is returned to the locked
position.

Revised 3/09

is suspended until key

FOR MORE INFORMATION, PLEASE CALL 210-533-1231

B7

JAMB MOUNTED FOR
SLIDING DOORS

Maximum security.

STANDARD FEATURES:

• Deadlock indicator switch

• Mechanical latchback by key

• Six-tumbler lock

• Plug connector

• Fail secure

• Mounting fasteners

• High torque motor

E L E C T R I C L O C K S

1058M MOTOR OPERATED

ELECTRO-MECHANICAL

DEADLATCH

OPTIONAL FEATURES:

HALF CYCLE HOLDBACK ­Remote
contact switch is required for
this function. Hookbolt is raised
electrically when switch is in
open position and lowered
when switch is in locked
position.

24VDC MOTOR - Specify "24VDC"

STRIKE WITH SECURITY
FASTENERS IS OPTIONAL.

Note: Elongated paracentric key
is required for use with a 1300
track set.

two position maintained

Specify “D.”

NOTE: Drawing for illustration only. Reference template

Swing Chart: Specify circled swing number when ordering.

* Indicates lock mounting / access plate side.

TECHNICAL DATA:

• STANDARD FINISH:
Galvanized

•

COVER: 3/16” steel plate

• CASE:

• STRIKE: (Hollow metal
door only) Stainless steel

• HOOKBOLT: Cold-rolled,
case-hardened steel

• DEADLOCK
ACTUATOR PIN: Cold­rolled, case-hardened
steel

• TUMBLERS: Spring tem­pered brass. Tumblers
actuated by phosphor
bronze springs, six

3/16”

steel plate

• ELECTRICAL: 115 VAC,

• LOCK SIZE:

• PARACENTRIC

• LOCK WEIGHT: 58 lbs.

• HOOKBOLT SIZE: 2” x 1/2”

• LATCHBOLT

Frame Preparation

for specific Information.

tumblers per lock.

1 phase, 60 Hz.,
.3 amp running

17-13/16” H x 6-11/16” W x 3-1/2” D

CYLINDER:
Silicon bronze/copper alloy

ENGAGEMENT: 2-1/8”

B8

Revised 7/13

FOR MORE INFORMATION, PLEASE CALL 210-533-1231